Inexpensive Bed Design by RVHaulers

[@badgerpa9]

Looks nice and the grey color is nice for matching to a vehicle., Thank you for taking your time to make a video on the trucks. Hope you all stay safe and healthy. .

[@rvhaulers]

Hello There! Thanks for your continued support of my channel, and for taking the time to comment. I always appreciate all the helpful information and insight you have provided over the years! Gregg

[@robmcneill2967]

Great stuff Gregg We are really impressed At some point we will be intouch. We finally got the truck imported and titled a motorhome We are getting there....Great videos‼️

[@rvhaulers]

Sounds like you are getting closer! Closer! Let me know if I can answer any questions. Thanks, Gregg

[@Riverstonesthrowaway]

Love the Canbed - looks clean and crisp. Keeping my eye open for the right truck!

[@rvhaulers]

Thanks for taking a moment to share your comment! I'm really glad you like the system. Good luck finding the right cream puff truck! Gregg

[@barett50cal]

Hey Gregg, great video. I really like the Canbed option. Definitely will be contacting you when I’m ready to convert a HDT.

[@rvhaulers]

Hello Barett, Thanks for your interest! I am the guy that answers the phone - I'm ready for your call when you are ready to start brainstorming your solution. Thanks for watching and supporting my channel, Gregg

[@craigparker8631]

Great stuff Greg ,can't wait for my build. A few years out though.

[@rvhaulers]

Hi Craig, I'll try to keep some ideas coming in the mean-time. Thanks for commenting. Ggg

[@adamspencer6666]

Definitely love the canbed. Would you be able to put these other trucks? Not sure if I’m going to end up needing a full size class 8 semi tractor

[@rvhaulers]

Hello Adam, Yes, we can install Canbed systems on all the Heavy truck makes. Kenworth, Peterbilt, Volvo, Freightliner, Mack, Western Star. Thanks Adam for your continued interest and support of my business and KZbin channel. Gregg

[@adamspencer6666]

@@rvhaulers What about a ram or ford 4500,5500 cab chassis?

[@michaelwhiteman723]

I was wondering if you could make a bed that I could put my Subaru Forrester on along with a fifth wheel hitch

[@rvhaulers]

Hello Michael, YES! We can certainly do that. Gregg

[@leeworsdell1410]

Hi Gregg iam wondering when you build these beds are they removable . can you still get at all the air lines and valves if you need to replace. And i noticed you built it over the fenders. I have a 15 volvo 730 with white poly fenders same idea. Temporary i have checker plate down that holds my 7000 honda and a few other things. getting close to a vist i hope.

[@rvhaulers]

Hello Lee, Yes you can removed the bed. We designed it that way. You have to undo those hot dip galvanized bolts along the frame clips, and it lifts off! Honestly though, it is easier to just slide under the RVHauler and work from the underside for the things you mentioned such as air lines and other systems mounted inside the frame rails. We do it all the time. There is SOOOO much room under the truck to move around, and even sit up between the driveshaft and the frame to access all those systems. However, if there was something major that needed attention, you can remove the bed and have full access. Great question thanks Lee! Thanks, Gregg

[@garyjones5093]

Does the shower take away from the sleeping arrangements? I would assume so. Great video

[@rvhaulers]

Hi Gary, The shower in no way interferes! The table, bench configuration and beds are all functioning as designed. We managed to get the shower into the footprint that was previously occupied by the storage closet. Thanks for your question! Gregg

[@garyjones5093]

@@rvhaulers . I’m sending you an email. Thanks

[@jeremyhaines7504]

For a setup like the one primarily shown what is the ballpark pricing for someone looking to DIY the install?

[@rvhaulers]

Hello Jeremy, At the time of writing this reply and comment, we are flat-out installing Canbeds on customer units that are physically here in the yard. We are so wonderfully busy I have not been making my systems available for the DIY folks yet. I kindly ask if you have 5 minutes to chat, give me a call and I can answer your question. My contact information is in the video description. Gregg

[@danernest6806]

Hey Greg , I like your beds , what is the price difference between American made and Canadian made . Do you have Canadian made ??

[@rvhaulers]

Hello Dan, I don't quite understand your question. We are Canadian made. We are located in Canada. We also sell quite a few to our US clients. If you would like a quote, contact me and I will be happy to quote in either Canadian funds or US dollars. Gregg

[@danernest6806]

@@rvhaulers oh so you buy steel from the US ??