Infiniti G35 camshaft position sensor replacement

Hi guys! if you find this video useful you can help me by donating , it don’t matter if it’s a small amount. Anything counts , link down below Thanks ^_^
www.paypal.me/FixitFelix529
---------------------------------------------------------------------------------------------------------------
if you want to buy the camshaft sensor click below
amzn.to/2Rt2NEJ
hey guys I had to replace the camshaft position sensor
this where the symptoms I was getting
1- Service Engine Soon light was on , VDC Off light was on and Slip light was on
2- taking longer to start engine
3- sometimes vehicle was stalling
after replacing the sensor all those problems were fix , I hope this video helped you ^_^
please Subscribe , Comment and Give a big Thumbs up
this will work on infinity G35 year model 2003 to 2007

[@FixitFelix529]

Hi guys! if you find this video useful you can help the channel grow by donating , it don’t matter if it’s a small amount. Anything counts , link down below Thanks ^_^ www.paypal.com/paypalme2/FixitFelix529

[@JairusTakay]

I changed both the sensors but it’s still not starting, do u know what’s the possible problem can be

[@j93mazda]

Change the crankshaft positioning sensor under the car

[@Mak2Grim]

Broski pulled out the 3rd grade pointer stick, legendary vid.

[@shakky9749]

facts lmao

[@Juice-jx1pr]

You do not realize how important a 10 mm socket is until you start working on the car

[@OutdoorsWithGeoff]

FACTS!!!!!

[@jovanlovett649]

I love how you can take apart half the car w a 10mm sockett and a ratchet

[@jesehernandez3071]

@@jovanlovett649 This is facts yo

[@roberthamill2451]

Seems to come up missing whenever friends borrow your tools.

[@Juice-jx1pr]

@@roberthamill2451 you might have to start charging $10

[@NG-VQ37VHR]

Holy crap man. It kills me that I can only like this once. Thank you for making this video. I just took care of mine in 15 minutes. I know there are a lot of us that run into this problem. I hope all of them in the future are able to find your video before pulling out the intake and throttle body. A shop wanted to charge me $500+ to do this.

[@FixitFelix529]

Thanks 😊 i am happy to help

[@BoonPre]

Literally had the exact same experience! Thanks Felix!

[@soliddbolthug5679]

Yea they told me it wpuld be $780 after the diag price of 140. Just to replace the second one.

[@mileen971]

@@soliddbolthug5679 yup a shop just quoted me 900+ dollars to change both of mine + labor and something told me to look it up because that price seems WILDLY high.

[@soliddbolthug5679]

@@mileen971 its no joke I have a aftermarket intake that was easy to move out of the way

[@sulatlalaki]

I like how you showed the easier way to change it rather than taking all that other crap off. Very helpful! Thanks!

[@geepee5413]

Great help Felix. I was not looking forward to removing the MAF and other parts. Thank you!

[@kevinkillian2165]

OMG, thanks so musch for making this video; and for making it so clear and easy to follow. This saved me tons of anxiety of where to look and how to proceed. Be blessed my brother with all your car experiences!!

[@thenextdogwhisperer]

Thanks Felix took me less than an hour to replace both you the man !!

[@robgamble2579]

Great Video !!!!! Super easy to follow with the camera angles provided. Thanks so much for your help. I did both CAM sensors since I had the engine cover off even though my code said just drivers side was bad.

[@picassosenvy3191]

Thank you SO MUCH Felix!!!! I cannot express my gratitude adequately here in this forum. I am slightly mechanically inclined, but KNOW very little about auto. This was a relatively simple fix! You saved me unknown repair fees...AND, you saved me $62.00 USD on the sensor by guiding us to amazon....that's right!....just on the sensor you saved me $62.00 USD! THANK YOU SO MUCH!

[@FixitFelix529]

Thank you so much for your comment. I am happy to help , it puts a smile on my face when I know I helped someone. 😊 God bless you

[@GIZREED]

I am about attempt doing this job in about an hr or so on both sensors. These are the easiest most straightforward instructions ive found so far. Will report back with results

[@GIZREED]

Didn't get to it until today. Was hard AF reaching the bolt on the sensors but I got it done 👍🏽👍🏽👍🏽

[@melianos2742]

Now I'm 1 step closer to becoming my own mechanic 💯👍🏼thanks brother

[@Headnsouth]

Great video, it saved me a boatload of time using your method. Once you find the sensor it's a piece of cake. Thanks for showing how to release the harness. They are always a PITA.

[@TheRycooder]

Dude!! BEST VIDEO ON THIS HANDS DOWN!

[@ig4293]

Hey mate ! Thanks for putting this out there. I am taking my 2007 G35x in for service tomorrow and it has a camshaft sensor issue, so I will have some solid knowledge going in. All I need is a 10mm socket once I confirm the error codes. Awesome!

[@TendiesMan69]

props to you for getting those camera angles

[@catchinhogs8434]

Informative, easy, and to the point. You rock!

[@larrysmith5130]

Just got my g35 and I'm definitely doing this tomorrow. Felix for the win!

[@roscoec.2575]

I replaced them all thanks for the info! And yes a 10mm is a must for this car. I didn’t need an extension, just a long 10mm socket for more clearance.

[@tomcooper7189]

This is an excellent video saved me tons of time and money thanks for sharing.

[@erickmarin1636]

You came in clutch Felix, thank you!

[@scotttan6377]

Another great video on the camshaft position sensor . I have an 2009 Infiniti FX 35. You taking the time to post this is giving me confidence as a DIY project . . Your others videos are above my head and comfort - level, but nonetheless , very informative . Subscribing to your channel !

[@heilong79]

Very little room in those engine bays, happy to see there is a quick way to do this.

[@davidwright9092]

Best video I’ve seen on this repair! Period!! Thank you!

[@FixitFelix529]

Glad it helped

[@greenacrefarm01]

I haven’t changed mine for the longest time because of those other videos saying remove throttle body.. Thanks for this video just finished changing your way.

[@croosz1959]

dude you just saved my life i’d like this video 1000 times if i could

[@Dreamchaser4L]

This looks much easier than other videos making it seem, taking out the intake and throttle body. Going to give this a shot tmrw morning without removing the intake... regardless great video man

[@roscoec.2575]

I just changed mine. I have a 2003 and a 2005. Note that the 2003 has a bracket blocking the screw for the one on the passenger side. Scraped my hands up but it’s changed so far no check engine light! Thanks for the video it helped a lot! Also if the sensor doesn’t sit even when you put it back in, know that it’s slightly tilted not completely level so to get the screw in turn it a little. Good luck! 👍

[@ChiHoKo]

Thanks for the video, help saved the time to remove a bunch of things. The clip is quite strong and I had to use a screwdriver to push it.

[@captainyak3948]

Useful info...I had to do it from the other side before and it was a pain...Now I got the Hitachi one and I am going to follow your advice. Thanks!

[@jgod876]

This video saved me tons of time, was super easy too. Thanks.

[@FixitFelix529]

Glad it helped!

[@newnameauto]

Definitely just did this at my job, in the parking garage, after the timed light went off and it only took about 10 mins. Thanks for the tip!

[@edlincul6773]

Followed your directions and fixed my bank 2 sensor problem. Way easier than removing the air intake. Couldn't see a thing, all by feel, it worked out just fine. Thanks.

[@bobbyheenan4061]

How hard was it putting the bolt back in without seeing it?

[@edlincul6773]

@@bobbyheenan4061 Actually it was easy because the sensor fits into the side of the block. You put the bolt into the sensor attachment hole and then just move the sensor around until the bolt lines up and can be threaded in. it is all by feel, but it wasn't hard. I changed the other side first so I could get a "feel" for what I was doing. It gave me the confidence to do the "blind" side. Good luck.

[@bobbyheenan4061]

@@edlincul6773 Got it! Appreciate the tip! I was worried about dropping the bolt, but that sounds like the way to do it. Should have my sensors in a day or 2 so we'll see how it goes!

[@bobbyheenan4061]

@@edlincul6773 Thanks again. Swapped out both cam sensors and the driver side was a piece of cake doing it your way...I used a 10mm wrench instead of a ratchet too. The passenger side was a bitch with that wire harness in the way, but I got the bolt back in eventually. Patience was key. Both sensors took me about 45 min. Thanks again!

[@snowboardingmtbiker]

I'm with all the others on this comment section, we really appreciate you posting this and saving us all money!!!

[@dixieflyer500]

Thanks for this Felix! Today, while taking my wife to her doctor's appointment in her G35x this sensor failed as we were coming off the interstate. I mean the car just quit. I thank God it didn't happen while we were at 70+ mph in multiple lanes of traffic. Got it home, and found out it was this sensor. The car is just 300 miles short of 100,000, and this is the first real problem we've had out of it.

[@BiG__Disgruntled]

That's what happened to me except I was going like 85. Luckily it came back and I was able to get over before it completely shut down. I'm still not sure if it was this or a battery cable.

[@DelinquentX-sp9ob]

Wow thanks man i had the same problem your a life savor

[@MRSOTELO408]

Thanks i was able to located and swap out both sensors in about 20 minutes. Video was very helpful

[@FixitFelix529]

Glad it helped 😃

[@alexbarron1934]

lol I had the same lights and everything. I’m abt to do the job right now. Thx man!!

[@THEBONERGAMERPRO]

My man, youre a master at recording

[@1badcisco]

Best video on replacing this sensor I have seen Wish I had seen it earlier, would have saved $20 on the Hitachi OEM sensor.

[@thomaslittle9948]

His way is the EASIEST way Thanks!

[@jha8914]

Awesome u save me had p0340& p0345. Installed both worked great ty again

[@lastking2114]

Love these videos man!

[@williampegues7987]

You are the man ,major respect

[@abramrodriguez3898]

Wow felix!! Thanks a million. You saved me lots of money.

[@zerosjourney9887]

Great video and thank you for getting that difficult camera angle

[@FixitFelix529]

👍🏻

[@kenny2xtimes61]

Good video man Keep up the good work 💯

[@DiQu40]

THANKS SO MUCH... YOU'RE A LIFE SAVOR.

[@FixitFelix529]

Happy to help 😊

[@carlosbertadillo3374]

Great video! Replacing mine in the morning!

[@anthonyswider664]

Good job, brother. You helped me out . Thank you.

[@zuno951]

Bro thanks for this! 💪🏽

[@VeronicaRodriguez-mu9yx]

You just saved me a lot of money dude

[@bobbyheenan4061]

Great video!! The driver's side is actually easier than the passenger side since there's no thick wire harness in the way. I used a wrench instead of a ratchet...Took me about 10 min.

[@goldenbanana5079]

This fixed my issue, code scanner said it was bank 2 and I replaced it with this sensor and it fixed my issue. Car was having trouble starting up and had all the lights on. Dealership wanted $600 to fix it..

[@mariajosefernandez1513]

I did a horn upgrade using Hella Supertones along with the stock horns...Hook them up with 14 gauge wire, relay, relay connector, fuse connecter,spade connectors, 1/4 inch wire loom, solder,heat shrink...I tap off the high from the stock horns to run the relay to the Supertones...They all sound great,and the install looks stock...

[@kadedalton3306]

I COULDNT STOP LAUGHING WHEN HE OULLED THE POINTER OUt

[@ACEStreetracer4life]

THANK YOU THANK YOU THANK YOU 10000000 million likes. You saved me time and money, luckily mine was Bank 1!

[@FixitFelix529]

I am happy to help. 😊

[@soliddbolthug5679]

No fr dude. You saved me 280 in a month im saving to move appartments. HUGE help. Let's see how easy it is for me to remove that clip with 1 hand lol

[@nenadobradovic9021]

Thank you brother. God bless you!

[@BIGB0SS202]

Thank you so much I appreciate you you saved me a lot of $

[@yazming1720]

Kewl video and to the point great pointer lol... Keep up the great work.

[@mileen971]

Okay thank you SO MUCH I literally just got quoted over 900 dollars at a shop to do both of mine and my soul wasnt sitting right with that price...they are DEF inflating it like crazy which I don't appreciate at all....

[@MysticShot]

Did the passenger side sensor 3 days ago. Now my driver side is failing so replacing that today! Thank you

[@marctunstall9055]

Thx so much, really helped out much love.

[@j7cars182]

Very informative!

[@brandon2991]

Bro you saved my life !

[@jocacordova]

Thank you to do this video help me a lot

[@parlayprofitsfx3948]

Just bought it gonna replace ASAP good price too

[@FixitFelix529]

Good luck ^_^

[@brianlee677]

Great video my brothers g35 has the same code but almost stalls randomly.

[@PapaSmurf63B]

Great video. Thanks for the info 👌👌👌

[@bobmendez7861]

Wow bro I hope I can get to it from that side I did not want to rip the throttle body off great camera work

[@lizhernandez320]

Code P0340 just came on my G35 so I’m guessing it’s sensor 1 for me… Thanks for this video!

[@302.marco_]

Thanks man really helped

[@aaronf80m394]

Nice bro thanks ! Great video

[@MKMeadows]

Great video Thank you !!!!!!

[@SY-ud6jo]

Great video! Do you know if these instructions and the amazon part you attached work for a 2008 G35 also?

[@Renault-v10]

1:55 😂I died never seen that before but thanks for the tutorial it fixed my start up issue

[@angelicatorres2855]

You are the best!!! Thanks

[@interlinkedMedia]

Auto-Lab just tried to charge me $600.00 for this. Thank you sir.

[@josefstemeseder3616]

worked for me - thanks!

[@codyvonelm1993]

Huge help thanks bud

[@markk4708]

Awesome vid. Had mine done in 20 minutes, 2005 G35 sedan, base auto (hot engine). Love the vid, thanks!!!

[@FixitFelix529]

I am happy to help 😊

[@CesarDiaz50215]

Nice help me a lot thank you

[@notacop3439]

I was having the same issues. I replaced the camshaft sensor and haven't had any issues since.

[@BruceWayne-fz7zt]

Excellent camera work. Every other video of this procedure did not show as much close up detail. My 350Z awaits.....Thanks so much.

[@214noel]

I did it thank you so mucho bro Dios te bendiga

[@yinda8659]

At the dealership and they want $374 to fix.... I now have a weekend project 😎. Thanks!

[@FixitFelix529]

Good luck 😊

[@cadavher]

I love g35s. I traded my 350z for a Infiniti so I could have a all year round car. Too bad they're aweful for so many failed parts lol. Out of my 300zx, 350z and now my g35, the g35 has everything the car can have wrong, wrong. Both door actuators went, both window motors, my mirror motor, my gas gauge, and now both crank and cam sensor. It's only got 70 thousand miles on it. I really wish I wasn't so attached to the body style or exhaust of them, or I would get another 350. Just finished changing the window motors yesterday, going to do the sensors now. Thanks for this video! I wouldnt have known you could get to them from the side.

[@FixitFelix529]

Lucky Lex you’re welcome. I hope you car last forever

[@boracay12]

The windows and door locks have a bad wire connection , coming from the body driver side to the door , i tied a string to the wires and pulled it tight to the door bracket . As a easy fix . I can not access the wires . The engine ground are bad too . Had to clean those and install extras. It shorts out the coils other wize , all 6 . Now its the " clock spring " in the steering wheel . Nissan is now co-owned by renault ,and crap .

[@torrancegreen3491]

NICE CAMERA ANGLES!!!

[@JairusTakay]

MANN THANK YOU VERY MUCH

[@josedelao298]

La manita la manita lol great video bro!

[@joserodas7989]

Sweet bro thanks!!

[@Loftavel]

great vid thanks

[@FixitFelix529]

Glad you enjoyed it

[@ipodmasterguythatlik]

Lmfao the pointer had me laughing out loud

[@joshnelson7653]

ha yea it did. i said to myself, "huh, it is an actual pointer...finger".

[@EverythingGreenville]

Crying bruh! You know before the video he was like, “where is my pointer?”

[@invalidusername_5101]

Bro I swear 🤣

[@Wingogetta]

thank u. subscribed

[@xkingjx888]

Made it look easy

[@tamararenee1920]

Thank you so much. The only problem I had was that your gloves matched the engine and it was hard for me to tell the diff, but I’m old. Lolol. How often would you recommend replacing a chain timing belt in the infinity? 😀

[@craiglee2939]

Nice remove and install video. However I bought the same sensor you included in the link and it lasted 3 weeks of daily driving. This is a hard ass job so do your research on the sensor before you buy.

[@Ezybeatz]

Did you end up having to buy an oem sensor or one from the part store?

[@dakhangsta]

Thank you!! Just one question when mines did that I had hard time starting it up? It takes about 2-3 cranks to start it ?

[@ferndogg4427]

I just replaced the crankshaft sensor for this exact car yesterday