Infiniti G37-G35 - Interior Ambient Lighting Installation

[@VIK7ORIOS_WORKSHOP]

You can see more here: kzbin.info/www/bejne/rIOVemCpfZh6fck

[@personalprivilege6992]

Thanks! Was trying to figure out how to wire to come on when lights are on. I have M37 and it was same color wire. Thanks again for video.

[@VIK7ORIOS_WORKSHOP]

Glad it was helpful. Thanks for the support!

[@kingj5808]

man i have a m56 and i cant find a wire i used the same colors and they arent working sadly

[@mcgregor27]

Beautiful ❤ well done sir 😎👍🏾

[@VIK7ORIOS_WORKSHOP]

Thank you!

[@harlangarza3209]

This is soo dope but looks like soo much work

[@VIK7ORIOS_WORKSHOP]

It is but if done right it's worth it at the end.

[@dankstabs]

@@VIK7ORIOS_WORKSHOPi just bought these you think this can be finished in a day? how time consuming is this mod?

[@VIK7ORIOS_WORKSHOP]

@@dankstabs I don't think so, probably 2 to 3 days max.

[@dankstabs]

@@VIK7ORIOS_WORKSHOP oh sheesh 😅 it's like that

[@frankiegarza3002]

All you need is them diamond pattern seats and mats and hard wood drop trays for your food or 420 friendly needs This thing lol like it's ready to be a VIP build. Stars in headliner, ambient LEDS man I can see it now, this thing welllll on its way 💪💪💪

[@kxngkeen2148]

Hey I’m doing it on my g37 but I’m not getting any power from the yellow and black. I tried dark blue and I’m getting power. The light only work when I use the switch. Any advice?

[@batmanDC576]

Great tutorial, followed it to the end but had one problem. When everything was fully installed, the illuminate fuse for the glove box light and interior illumination blew. I replaced it with a 15A as the manual suggested adding 5A and started the car but my battery had died from all the tests . After jump starting the car, the led strips, interior illumination and rear running lights still not working. Any recommendations? Did you end up upping your fuse to 15A as well?

[@VIK7ORIOS_WORKSHOP]

No issues for me, still running the original 10A fuse. Maybe try to remove the glove box bulb if you haven't, especially if it's the old halogen one and leave only the wires for the controller connected.

[@alexcodreanu2985]

This is dope bro definitely gonna follow to make my g look likes that. Also those black panels are 🔥 u custom paint them?

[@VIK7ORIOS_WORKSHOP]

Yes, just black paint, red glitter and a clearcoat.

[@isaiahfouche7495]

How’d you get the panels off

[@connoraguilar1319]

did you notice any loss of controls when tapping into rear harnesses? Did you do the same colors from the front in the rear as well?

[@VIK7ORIOS_WORKSHOP]

No issue after installation. I don't remember exactly but you can test to see which one has constant power.

[@rajeshdayal5182]

How did you test it before installing ?

[@tonychrome07]

Hey, I’ve watched your video many times and finally got myself to buy the kit and had a question. Did you put the footwell lights in the back seat because I didn’t see it. if so, do you just stick it to the seat?? Thank you

[@VIK7ORIOS_WORKSHOP]

No, I put all 4 on the front only.

[@tonychrome07]

@@VIK7ORIOS_WORKSHOP Perfect thank you for the response. For the wiring, did you also just put the tip of the wire in the connectors?? because i was gonna cut and tap them. Also, i like the music change🤣was getting tired of the old song after watching it 20 times

[@VIK7ORIOS_WORKSHOP]

@@tonychrome07 Yes, just inserted the pin next to the wire and taped them so they don't move.

[@chrissalazar4712]

Bro this looks like so much work bruh I don’t even wanna do that shit anymore

[@VIK7ORIOS_WORKSHOP]

Yeah but it's worth it at the end.

[@skywalkerline]

подскажи пожалуйста, декоротивные накладки на дверях и панели на клипсах или на других креплениях?

[@anthonyhuitzil1954]

How did you connect the wires to the glove box light ? Did you replace the light for the leds ?

[@VIK7ORIOS_WORKSHOP]

Just connected both positive and negative wires together.

[@randomvidguy3787]

what kit did you order for front and back 6 in1, 10 in 1 ,14 in 1 ?? There's a few options on ali express.

[@VIK7ORIOS_WORKSHOP]

Depends if you want other lights like footwell, door storage, etc. I would go for 10in1 only because the other lights are hardly visible especially with black interior. If you want the LED strips only, just pick 6 in 1.

[@ydwfear]

I am doing my door put black to black red to yellow and I’m not getting power I put it to the door light when doors open and getting power anyone know if the yellow is different on a g35

[@VIK7ORIOS_WORKSHOP]

Turn on your headlights and check again.

[@ydwfear]

@ all good I wired to white it only comes on when the cars turned on don’t have to turn lights on

[@v36glo]

Where did u get ur door panels from?!?? Love the design on them

[@VIK7ORIOS_WORKSHOP]

You mean the black/red trim? It's just painted with red glitter.

[@WeMadeItVic]

for the 6 in 1 not rainbow can u still change it to different colors or is it just white?

[@VIK7ORIOS_WORKSHOP]

Yes you can change to every color.

[@WeMadeItVic]

@@VIK7ORIOS_WORKSHOPappreciate it❤

[@midasbaysal5197]

Will the same kit work on an Q70/M56 ?

[@VIK7ORIOS_WORKSHOP]

Yes, it's universal.

[@jimmykoran7805]

Any reason why you didnt do the center console or just preference?

[@VIK7ORIOS_WORKSHOP]

I don't like how lights look there, also the kit doesn't include more LED strips.

[@luishernandez7224]

How do you make your black and red wire have that sharp thing to connect it ?

[@luishernandez7224]

1:54

[@chawkfan94]

@@luishernandez7224 So those are crimps for what I imagine is 22-26 AWG wire. I imagine that the crimps are likely already on there, BUT there definitely other wires of attaching those wires to hot and ground if needed. Like you could just burn a hole in the insultation and solder the black and red to the respective ground and 12V lines. Or you can use those awful wire splice connectors(I DO NOT recommend).

[@luishernandez7224]

@@chawkfan94 thanks fr

[@VIK7ORIOS_WORKSHOP]

The kit comes with them already installed.

[@jpxstudio]

Are the door controllers by the door and the main controller connected? if so, how?

[@VIK7ORIOS_WORKSHOP]

The connection and wiring is explained in the video. Controllers communicate with each other via Bluetooth.

[@WeMadeItVic]

have u had any issues since installing them?

[@VIK7ORIOS_WORKSHOP]

Nope. Everything still works fine.

[@luishernandez7224]

U connect the wires to the back doors the same way u did in the passenger? Cux I did that and it started sparking

[@VIK7ORIOS_WORKSHOP]

Yes. Maybe it's different for your model. You should test for power before connecting them.

[@СергейЖвакин-б9х]

ОГОНЬ 👍👍👍🔥🤘

[@immanueldelcastillo6041]

Do you know how to switch this up on your indicator? So it will light up with, let's say your DRL lights?

[@VIK7ORIOS_WORKSHOP]

You connect the main controller to your DRL lights and the sub controllers to a constant power.

[@immanueldelcastillo6041]

@@VIK7ORIOS_WORKSHOP I get that, but I do wanna know the intricacies of the signal switch itself. I have two non functioning modes in it, the DRL on/off, and the Fog light, on/off, as it's in the dash. I was thinking if I could use those for this

[@Ocho474]

I was planning on doing that to my Q60 but after watching this video I changed my mind, I can live without it. 🤣😂

[@luishernandez7224]

How did Yk what wires to connect them too bro?

[@VIK7ORIOS_WORKSHOP]

I tested them first to see which one has power.

[@ActuallyFlo]

Can i just cut the end?

[@VIK7ORIOS_WORKSHOP]

Yes, you can cut it between every LED.

[@ActuallyFlo]

@@VIK7ORIOS_WORKSHOP thanks m8, one last question. Where did you find the animation for the flying led effect from door to door. Wich app are you using?

[@VIK7ORIOS_WORKSHOP]

@@ActuallyFlo Magic Lantern.

[@ActuallyFlo]

@@VIK7ORIOS_WORKSHOP mh ok, bought the exact same kit but i got „lotus lantern“ in magic lantern the box does not connect. So i dont have the animated features :/

[@VIK7ORIOS_WORKSHOP]

@@ActuallyFlo There are 2 options to choose from when buying the kit. You got the cheaper one with only solid colors and no animations. Should've got the "Symphony" one.

[@filippurevich1548]

Колхоз

[@frankiegarza3002]

Shit is boss breh, keep that shit coming💪💪💪🤙🏼🤙🏼🙏

[@luishernandez7224]

Yo bro where did u plug in the back and the passenger side ? And am I supposed to plug in the negative and and then the positive

[@VIK7ORIOS_WORKSHOP]

1:42 in the window switch, doesn't matter which one you plug in first.

[@luishernandez7224]

@@VIK7ORIOS_WORKSHOP damn fr 😭 cuz I have the same car and I plug it in and it started smoking