You just need to correct the problem at the two plastic exit fittings on the firewall. Pretty easy fix. A little silicone solves it. Also removing the center plastic piece from the fittings is a good idea, although I didn't do that and have no further issues.
@gmilly37x9 ай бұрын
Literally having the same issue right now, water under the carpet froze up cause it’s cold where I am smfh
@aangel4o89 ай бұрын
Damn bro that’s crazy, I’ve had this issue since I got the car but never really knew how to fix it until recently.
@gmilly37x9 ай бұрын
@@aangel4o8I had the same issue as well when I first bought my G 3 Years ago. It’s a very common problem in the Gs
@cupieed82679 ай бұрын
same
@mightyj8068 ай бұрын
I was wondering why I didn't see any videos on snaking the drain hole first. Now I know why. I have a leak on the front passenger side only. Confirmed it wasn't draining from underneath the car. Then I snaked it with a brush tip wire and degreaser all the way down to the firewall and followed with hot water. It started draining great so I assumed I got lucky. No, although it's draining outside car it still also leaking inside as well. I guess it's safe to assume the hose leading to the firewall plastic cap seal is shot?
@larrytutino1557Ай бұрын
Good luck with the splicer fitting they probably get clogged up too
@aangel4o8Ай бұрын
@@larrytutino1557 car got totaled so I can’t confirm this
@larrytutino1557Ай бұрын
Sorry about your car, as long as you are fine that all that counts
@andreys96242 ай бұрын
Also how did you dry the carpet? No mold issues afterwards??
@aangel4o82 ай бұрын
@@andreys9624 I vacuumed it out with a wet vac and pretty much just dried with carpet with a blow dryer and it was fully dry after I did that. And no I didn’t have any mold issues after that.
@majrmalik72162 ай бұрын
May be a dumb question but where does the splicer go??
@aangel4o82 ай бұрын
I put mine on each Pilar one on the driver side and one on the passenger side
@majrmalik72162 ай бұрын
@@aangel4o8 Thanks! so you used the splicer to connect the original tubing to the new one? Just to be sure
@aangel4o82 ай бұрын
@@majrmalik7216 yes that is correct
@andreys96242 ай бұрын
Nice steering wheel!! Where did you get it ?
@aangel4o82 ай бұрын
@@andreys9624 a local shop I used to go to here in San Jose Ca
@hellgirlll96864 ай бұрын
I’m losing brain cells trying to understand his way of instructing