Infiniti Interior Trim Panel Repair Fix - Q40 G35 G37

Repainting trim panels on 2008 G35 sedan.
Recommended amazon link: www.amazon.com...
As an Amazon Associate I earn from qualifying purchases
My website: www.justvlads....

[@JustVlads]

Buy the paint here: amzn.to/2FcjgIu Helps me out: www.amazon.com/shop/justvlad

[@annayehudah785]

Thanks for the video. Just finished the handles and it looks so much better!

[@sonidosoundwaves]

Thank you for the video! one question the upper trim metal can be removed as well, mine needs to be painted, l would appreciate your reply.

[@peterkim2987]

Can it be used to paint g35 front grille??

[@raulgutierrez9432]

What is the original color of the bezel?.

[@madrush1971]

Did not look good when I did it . Needs plastic paint

[@jolazarzycka5545]

Good job! Just a tip for other people reading. I had mine in a better condition (wasn’t as scratched) and all I used to remove it was rubbing alcohol (with terry cloth). Save your time on scraping it off. It took me a few minutes and it was spotless. Just a little tip for others to save time 🙂

[@viktoryavorskiy485]

WD40 might help too

[@DEATHTRUTH]

I just did mine, the best thing to clean it off with after scraping the black paint is Isopropyl alcohol with a mildly abrasive scrubbing pad like the one in this video. I've tried goo-gone, turpentine and steel wool. But Isopropyl alcohol worked the best with the green scrubbing pad.

[@jdub7651]

Thanks I tried this and it made my life 100x easier

[@wavyjeff]

Just bought a 2007 g35 that had this same exact issue, I used bumper and trim paint and it came it really good and completely change the whole look of my interior. Nice video

[@BotsandBits]

Cheers mate, I did this on my V36 Skyline thanks to your video. In Australia we don't have the black appliance paint. But that brand make a gloss outdoor furniture paint which looks the same, just takes 2 days to cure. Isopropol & a rag definitely gave me a more consistent cleaned surface.

[@testuser8977]

I used isopropyl alcohol to remove the black rubberized paint. It came off quickly. I am wrapping the trim with matte black vinyl.

[@lthom286]

I just found your channel and I have to say I am loving your contents. Keep up the good work with the diy for the G’s

[@parkerhein3378]

I did this but I sanded off the old stuff and then I put a black base coat then I hydrodipped them black/ gold and it’s 🔥

[@thecyberkid1751]

Just ran across your video. Thank you! I did mine panels a couple of weeks ago and they look brand new!

[@karinasoto5530]

Please make an update on how the paints held up! Trying to do this to my G as well!

[@twes619]

Nice job man. I love stuff like this. Fun little projects that make a huge difference!

[@VintageChic1983]

Can you make a video popping those out please

[@cletuskasady593]

For real though.

[@aaroneichhorn1608]

I pryed the little clamps with a screwdriver. It should come off pretty easily

[@kaidenhansen7006]

I like your videos super simple super easy to understanding

[@JBeck2468]

Dude! This looks really good. Looks like it’s been a while since you made this video. How has the paint held up over the year(s)?

[@esc5085]

Yeah let us know I’m about to do this to mine

[@jasondominguez8434]

Anyone doing this, Appliance epoxy takes weeks to fully cure & IT WILL orange peel, In order to sand & polish you should wait about 2-3 weeks after it’s painted, Far easier to us flat black then a clear coat, Looks better as well, Don’t use the appliance epoxy folks

[@valentinotorres2867]

Omg man looks soo much better!! Good job brotha

[@lgarla23]

Aghhh thank you I was wondering how I was gonna tackle this job 👍

[@rapid13]

I was really hoping to find a solvent that would peel that crap off. Mine look worse than what you showed. I tried GooGone, works OK but the whole process takes too long. _Edit:_ Scrape with spudger/panel tool, hit with scrub pad, then steel wool, THEN GooGone, wash with soapy water. My only issue now is I got bubbles in the paint of the driver door. FML.

[@X2ndSaturnGamingX]

Only problem...it's a fingerprint magnet, but looks nice tho and might try it with my g35 steering wheel trim.

[@Djcirrussr22]

Good job and thank you for the knowledge

[@jmb1089]

It looks amazing!!

[@parkerhein3378]

How tf do u pop out the piece

[@s.maverickharrisonii6019]

Thanks nice job , am doing mine tomorrow

[@brooklynturner6467]

Yo thank you bruh im about to go crazy

[@kelseyreid5793]

Mine is that bad hahha, thanks for the video

[@whoa2488]

Me actually could have just sat and nail polish remover and it would have all floated to the top of the container and you could have pulled it out and it would have been completely clean without all of that extra effort

[@Prettytiffy]

The rooster roosting was amazing

[@JustVlads]

It's funny but, I'm in a pretty populated area and that rooster surprises me every time lol

[@kj1791]

Great job look like new.

[@TheXxXxX86]

I have the same issue in my G. I would like to do it.

[@madovee]

Would you recommend that paint for the steering wheel?

[@jdub2878]

Buy a steering wheel cover that you sew. It'll look factory new.

[@jmichael1holmes]

Man you shaved YEARS off the interior with that gloss black im doing this

[@florian1523]

Do you know if the steering wheel trim pops off as well?

[@eddyman101]

Looks good. How has it held up?

[@JustVlads]

It's holding up well, no chip or scratches. Paint seems to be pretty tough in this environment so far.

[@marklengal9990]

How has this been holding up?

[@peterkim2987]

Can you apply this paint for exterior spoiler?

[@dallaslewis4411]

how do u take the panel of the switches?

[@Mokujo]

How did you pop the clamps off? I have my panel out but can't disconnect it from the buttons

[@JustVlads]

It all clips together, if you look closely there are tabs that you have to lift and the button control section will release.

[@dallaslewis4411]

@@JustVlads can u explain this more or demonstrate

[@MarcoAntonio-rc9sd]

You should of showed us how you popped it out so we don’t damage around the edges but good video None the less

[@maicolbaker]

Marco Antonio i agree..

[@deepee1544]

Plastic pry tool

[@annayehudah785]

I just did it. Used a flathead screwdriver. Started on the edge where the cushion was else I was denting the plastic of the door handle. I did not attempt to pry on the tips as I too was afraid I would snap it

[@juangalvan3128]

Hiw many coats did you throw on???

[@JustVlads]

2-3 coats, the appliance paint has very good coverage.

[@Yahmuddacapiche]

Clever

[@zionharris1823]

I feel like that black interior on the gs where cheaply made

[@Mokujo]

How many hours between coats?

[@JustVlads]

I just put a few coats about 10min apart. This stuff dries forever so wait at least 24hrs before messing with them.

[@quidproquo82]

The silver trim is cheap and looks horrible over time. Mine looks exactly like that

[@jdub2878]

Pull it off and vinyl wrap it. It'll look new and you can change the style, maybe carbon fiber look. All those pieces snap off easily.

[@walterharoldbishop]

this looks super cheap.