Infiniti Q70/M37/M56 Sport Paddle Shifters Installation

[@gregjoseph3448]

great video, beacsue of you're video and the links you provided I was able to order the paddle shifters and the sterring wheel cover, and i went on the infiniti forum and was able to get rex email, I emailed him and he replied back and sent me a paypal invoice for the cusotm bracket that was needed for my q70, I recieved the bracket and did the entire install today. it worked like a charm and i referneced your video while i was doing my install, so again thank you, this video was a huge help

[@coolkami]

Glad I could help!

[@memyselfi3027]

Great job I might just install those on my q70

[@coolkami]

They are very nice and shift on demand is even better when you are in D mode!

[@Blassie.P]

Rex is the man I ordered mines and been driving spirited every since .

[@theLastHuff]

How did you get ahold of him??

[@Noway_itstwinem]

How did u order it I need a set so I can install mines

[@Blassie.P]

@@Noway_itstwinem I sent but KZbin keeps deleting I don't see what I sent you

[@marck2322]

amazing video thank you for making it!!!

[@coolkami]

Thank you!

[@tylerwildman7119]

Bro thankyou so much, great video

[@MrJvelazquez77]

I just bought a 2011 M37 without paddles, looking forward to doing this mod. Thanks

[@dantheman4861]

Hey man, i also recently bought a 2011 m37. Let me know how the install goes!

[@sharyar72]

Good job and DIY!

[@coolkami]

Glad you liked it!

[@tonyray9864]

Can someone tell me how to get to video notes?

[@ravipablo2276]

How would you connect the harness if it isn’t already connected?

[@coolkami]

@@ravipablo2276 there is a post in nicoclub forum that someone did that. It’s not hard you just need an extra wire harness to connect from under dash connection to the steering column.

[@jahsoncleanculture4095]

I need the same bracket for the shifter for the same car

[@jahsoncleanculture4095]

Hey good day I need information to buy the shift a bracket I need to see in bracket for the same car

[@syriusblacc9746]

Did you have to have the wires installed? Or it came with the car?

[@sauddd18]

Nice work! How much did all parts cost you?

[@coolkami]

See the links to the parts in the video notes.

[@Neruodiv87]

I am going to do this, do you happen to know if this voids manufacture warranty?

[@tonyray9864]

That’s the million dollar question…..

[@Drew5.6]

will the m37 bracket fit the m56 version??

[@dirtlamp3603]

Please upload daily

[@GuapoXV]

Can you go non oem ? 🤔

[@ImportDomestic2006]

So I have a 2015 Infiniti Q70L. I already installed the paddle shifters, but they don’t function. Is there some other procedure to make them work or do they need to be programmed?

[@coolkami]

If the wires are hooked, it should work. Not sure why it wouldn’t.

[@miomy3534]

Can I do this to my Q70L 5.6? Thanks...Awesome video.

[@coolkami]

I think so, as long as you have the two wires for the shifters I don’t see why not. Also if you don’t have the wire ports, there is a retrofit wire kit that you can order as part of the bracket package from Rex that make it works with the cars with no wires.

[@kurtkloss3491]

Yes you can depending on the year you own, I think it was 2018 they stopped leaving in the paddle wires. The g37 bracket won't fit these cars either fyi.

[@kurtkloss3491]

Nice vid man, let's anyone who hasn't pulled these open what they're looking at getting into. Already put paddles on my M56x a while ago.

[@suhaibts7278]

Does it require any system reset or software upgrade after installation?

[@kurtkloss3491]

Yes, I just did it to my m56 which has no difference in many cases.

[@vill9441]

I can’t get ahold of Rex.help me out

[@coolkami]

Pre-order~ Special Handmade Paddle shifter bracket for Y51 (M37,M56,Q70) 1 pc bracket: $110 Mail me : [e-mail] *The bracket is suitable for Y51 which doesn’t have stock OEM bracket. *Discount for purchasing more than 5pcs : (Shipping to same address) * International shipping cost is not included

[@jamesak257]

What is Rex website can’t find it need just the bracket

[@coolkami]

I don’t think he has a website, you have to either contact him through Facebook or email. See the video notes and link to nicoccoclub. He has been mentioned there with I believe the contact.

[@coolkami]

[e-mail]

[@NoahWilson98]

Great video. I have an FX37 and would like to install this bracket. Do you happen to have any contact for Rex? I found an email on a forum but wasn’t sure if he is still making them or if it was the right email. Thank you

[@coolkami]

Thanks! I believe email is one of the best ways to contact him.

[@NoahWilson98]

Thank you, I was able to email and order the bracket!

[@JONA7297]

@@NoahWilson98 did u ever got the bracket

[@JONA7297]

For the fx37

[@leonelfavela2964]

Where can u buy a bracket ?

[@coolkami]

See the video notes, you can contact him there through nicoclub or go to m/q70 Facebook page and he is a member and can order from him.