Install BlackVue 900X+ dashcam on Infiniti Q70/M37/M56

[@davestephjuu-ichi3524]

Need some advice for removal of that a pillar trim, also what fuses did you ultimately use for connecting the camera. Thanks

[@coolkami]

You have to pull down the weather strip to allow opening for the A pillar, then gently pull down from top of the pillar and it should release from two pin latches that it has, at this point the second anchor pin is holding the pillar dangling, I used a needle pliers to twist the dangling part of the anchor 90 degree and get it out and then you can pull the pillar towards you. For the fuses, I used stop light for permanent power and blower fuse for ACC. make sure to use the fuse taps correctly as they are directional, there are some good KZbin videos about how to.

[@Bear_83]

Update please. Show some visuals