InfiRay Jerry 31: Budget Night Vision Binoculars - Full Overview

[@billydanzz]

NOW THIS!....Is what a nods comparo/review should look like. One can easily determine what performance/price level you'll be satisfied with. Would love to see this format used to compare the new 'supergain' tubes to other top and mid-tier performance tubes to see if they're worth the stretch. Subscribe button hit.

[@coldharboursupply]

Thanks for the support!

[@nathan-ls8yw]

@@coldharboursupply are these eligible for sales outside the united states?

[@OverNightVision]

The video the world needed.

[@truelow]

Love the tech/feature breakdown in a digestible and quick format. Well done! Also definitely getting these for my first set from you guys, thanks to the video.

[@FaustianDaydreams]

More than anything this video made me reconsider the importance of White Phosphor. Appreciate the info gents.

[@utahjohnnymontana3373]

Same here. I don't have access to different units to compare so this really did a great job showing the difference.

[@R55Shibby]

Got mine hours before you released the video. I am satisfied, for sure. Compared to my L3 tubes, its a big difference. However, the price was less than half my L3 set.

[@harizdean3448]

How does it go so far? Is it a good purchase?

[@aesthetic8780]

​@@harizdean3448Yeah but not with shitty NVT-4 tubes. The NVT-5 tubes are just 20% behind the L3 tubes. Or even a little less worse. Its just 3 k

[@joetafolla4757]

Do you know how to tighten the articulation? Mine articulate just fine but its doesnt feel as stiff as I think it should be.

[@joetafolla4757]

I got a set and I love them. Obviously they arent as good as Gen 3 but for the price its worth it. The lenses are 25mm vice the 30mm from the 1431 models so as of now I havent been able to find a way to attach adjustable iris lenses but im sure accessories will come out eventually since these are becoming more popular. @@harizdean3448

[@R55Shibby]

@@harizdean3448 it's decent. I don't think it's for a high end user by any means, but for casuals or airsofters I think it is more than reasonable. I did an NVG shoot with them and wasn't at a detriment compared to my L3 31s. They will suffer more in low light, though

[@arnelgelera242]

I am sold. Not looking to spend too much and this is IT

[@user-rdie4neds8zakip]

It is a great video that objectively compares and explains using actual visible images, unlike the typical videos of this type that show the appearance of NVG and ramble on and on about subjective opinions.

[@7seasons31]

Very in depth. A lot of work went into this, thank you.

[@coldharboursupply]

Glad you enjoyed it!

[@KnyghtErrant]

I wish other companies would get on board with a simple analog gain knob like this as a standard feature (looking at you Nocturn with your silly digital push buttons....).

[@gregmaggert8561]

This is an amazing video. I learned things i didn't know I needed to know!

[@MikaHodnelandyt]

I will deffenatly buy a pair of these when I got the money! Great video bro

[@Ricci_215]

It’s sometimes SO difficult to compare the quality of tubes through KZbin videos. This video does a pretty well job doing that, so thank you for that. Now I just need to decide if I want to sell my high spec Echo PVS-14 and grab these or just wait for another matching PVS-14 to bridge. While these look promising for cheap duals, I’m afraid I’ll be disappointed going from a 32SNR/78RES Echo to these…

[@SpecOpsGear]

same, just not sure if i'll be disappointed going from high quality stuff to these.

[@nonya883]

Dude literally same

[@typorad]

Do you consider binos worth it?

[@turdferguson2863]

Two 14s bridged is a heavy setup, it's what I'm running currently but I often loan one tube to a friend so we can both see, something you can't do with these. If you don't want to share this is a lighter setup for sure

[@brendanmarriott661]

​@turdferguson2863 thats definitely something people overlook, the 14s are so easy to through in a pack or pocket when your not using or dont need it on your helmet

[@donovanmckee733]

Great video and even better company,i bought a helmet from them in person a few months back.

[@JohnSmith-he4xn]

Awesome video. Now id love to see them compared to l3 and elbit. Just to see. Clearly they will not be competing but it would be cool to see

[@ShadowRegimeAirsoft]

Great overview, wonderfully presented. Thank you!

[@rphl-v3k]

Very informative video! That housing would be very interesting with Photonis tubes.

[@LARPeratorsAnonymous]

great overview dude! currently running a 14 and looking into duel tubes. Keep hearing about these and this gave me some great things to consider!

[@scoobarsteve7948]

What has you wanting dual tubes over single tube? I hear there’s just a learning curve to get used to single tube but eventually you’d with experience you’ll be on par with how naturally dual tubes feel

[@taylor_benson]

@@scoobarsteve7948 Can't speak for OC, but as a guy who has used a monocular extensively and moved to dual tubes; yes, with time, you can get very proficient with a monocular but there were still many occasions where I would be looking just a few feet in front of me and not able to tell if I'm looking at a one foot drop off or a six foot cliff. This is where dual tubes shine. The difference in depth perception makes a world of difference and I've found I can move much quicker over rougher terrain with confidence using binos.

[@chrisdavisunofficial]

Excellent video!

[@dukeofearl236]

Very informative not like others I see thanks

[@1111111111202]

great work, subscribed.

[@william4400]

Outstanding review! Thank you...

[@Scarfac3ITALY]

awesome review

[@olbrixx1482]

Great review dude! Thank you.

[@11BRelo]

Subbed for when I’m not poor lol thanks for the info I’m a fan of these and seriously considering like I said when I’m not poor

[@alec7283]

I know you said there were some size differences in the housing. Could the tubes be upgraded to L3 or Elbit if the user wanted to eventually? Thanks in advance!

[@themarketingguy]

Very good video and Im am buying one !

[@LackLusterMedia]

3:09 noice

[@sgtkey9416]

Noice

[@paul-assiddiq-001]

Great test , thanks 😄👍✨

[@TheRiskyDingo]

This is really appealing. The price point is similar to the tanto pvs14s with a bridge that I was looking at.

[@coldharboursupply]

They are very different products with different use considerations, send us an email or shoot us a call if you ever have any questions!

[@cagneybillingsley2165]

budget? pvs 14 which does everything and more is 2k cheaper

[@TheRiskyDingo]

@@cagneybillingsley2165 pvs14s bridged is super heavy. I'm looking at doing the tanto housings and bridging them or these

[@coldharboursupply]

@@cagneybillingsley2165 Depends on where you are from and what features you need. We carry a variety of devices for many users.

[@wrxFTWdey]

So I’ve been looking for another set of Binos to either replace or use them alongside my 1431s. I have elbit wp xlsh tubes that are well matched, decent specs like 28 snr, 2000 fom, .9 ebi, and 1.0 halo. Being that they are pretty high specs for xlsh tubes, they each have 2-3 small blems. Likely the reason they got knocked down to xlsh’s. Even with decent specs, I feel like they leave some performance to be desired. I’ve used them in the darkest of nights in thick woods and even been in a subterranean environment where pretty much all types of I2 nvgs will struggle or just be ineffective to the point you need to either use your peq the entire time, or switch to thermal. I’ve got about 8 ish years experience using different types of monoculars, Binos, and thermals. I think the specs of these jerry 31s will leave a lot to be desired for people who intend to use their NVGs professionally. You usually don’t have the luxury of utilizing a supplementary light source. With the low specs, and lack of auto-gating, poor lowlight performance I think they are not a good choice for the population of people who are looking for binos for professional or duty use. Obviously you have to find a good balance of cost and performance that will suit your needs. I definitely see a ton of applications where users of these binos will be more than satisfied with the performance and their ownership experience will be superb. It’s still very exciting that companies are making nvgs more and more affordable, particularly WP, articulating duals because that’s what all the cool kids want. Thank you for the great comparison video and all the information!

[@nocturnal_walker]

wau thx a lot for this content. Very informative and not only regarding Jerry 31 Binoculars but also about tubes and their features. Auto-gate vs BSP is kind of info you can't get anywhere else. I'm currently interested into buying NNVT equipped pvs14 and I'm very thankful for every bit of details you provide to us. If I got it right, BSP helps to protect tubes in a different way than auto-gating with impact on resolution. Is there any advantage compare to auto-gating ?

[@coldharboursupply]

BSP lowers the voltage of the Photocathode, whereas Autogating pulses the power supply. In a very layman's terms, autogating preserves more resolution than BSP and is used on a lot of modern nods. All modern tubes will have BSP, not all will have autogating, Photonis tubes and NNVTs-AG will have both AG and BSP whereas the NNVTs that are not autogated will have BSP. The autogated tubes will use a combo of BSP and Autogating to protect the tube versus only BSP for the NNVT-4s. BSP alone protects the tube plenty with a higher impact to resolution than the BSP/AG combos of the other 2 types of tube. The main disadvantage to BSP is the dropping of resolution. However, in some cases this is less visually distracting because the tube does not have to pulse as can been seen in our flaring test, this depends on the frequency and intensity of the lights you are exposing the tubes to. NNVT's are also known for their impressive BSP. I would not base my tube selection on this feature alone. Hope that helps.

[@nocturnal_walker]

@@coldharboursupplyI love this answer, you are the best ! Now I know where to ask these technical questions, and I'm looking forward for upcoming content, especially NNVT related. Hopefully I can get mine own soon, but I want to understand all the details before purchase.

[@coldharboursupply]

We have a detailed comparison of NNVTs and Photonis tubes here. Have a look! kzbin.info/www/bejne/bGfWgIRmidCLmJosi=KjYGZ7w3I7yWkioz

[@nocturnal_walker]

@@coldharboursupply excelent video,i saw it maybe 5 times already 😀. Autogating looks like must have feature to me. One more question regarding NNVTs - are nnvt5 newer production than 4? In that case are there nnvt5 with autogate? Do they both allow manual gain control? What are the differwnce between nnvt4 and 5? Any significant difference if we have tubes with similar spec?.it's hard to find relevant information about nnvt production

[@aesthetic8780]

​@@nocturnal_walkerNVT-4 is Photonis XD-4 and NVT-5 is Photonis XR-5. NVT-5 can have a way higher FOM.

[@pinotosca1213]

Please review the NVLS panos

[@joshuamburmer]

Great comparison any chance of doing a nnvt vs mid tier gen 3? I have a Elbit pvs14 but definitely considering the switch for duals as opposed to a single monocular for very similar price. Hard to justify double the price for gent 3 duals unless the difference is staggering.

[@coldharboursupply]

Hit up a US dealer who has access to both :)

[@joshuamburmer]

No gen 3 in Canada? Didn’t know that

[@Tattlebot]

@@Kaotix_music Harder is German and offers high spec gen 3 semiconductor tubes. There are also Katod and NNVT offering gen 3.

[@St.Howard]

I'm thinking these are my first set.

[@run_lift_communicate]

That price is really amazing, I just need another 1700$

[@darylobey8867]

You can and will have them it won't be Roddy but the day will come when you do 😊 nods are worth it cool and a super power but buy them and use them I know guys whom have all the gucci gear and don't do ahit with them :/

[@rafaelvazquez9374]

any word on the jerry 31 battery pack?

[@CiviTac]

Are the Jerry 31s considered gen2+? Also do you know if there are any plans to use autogate tubes for them in the future? I think having them for 3500 ish with gen3 autogating would arguably sell better if you can undercut pricing on duals like tantos etc

[@coldharboursupply]

These are Gen2+ technically. And we are in Canada so the availability of tubes is different from those in the USA.

[@LernToSpeel]

Great comparison if I say so myself ;)

[@NattyVeganLifter]

Best pvs14 I’ve ever seen… all the ones I’ve used in better off with no nvd

[@KrisSays]

Quality content... Subed...!

[@discodougie2633]

love your videos and thank you for the knowledge transfer!

[@Tellminator]

Great review and especially great comparison between different tubes. Would be great if you could make a video in the future comparing the different NNVT tubes that are available. I have found NVT 4 and 5 tubes with and without autogating, with and without manual gain. And apparently there are NVT 7 tubes (no idea what the specs of those are)

[@terencewong1874]

Basically: NVT4 1400-1600fom NVT5 1600-1800fom NVT6 1800-2000fom NVT7 also same fom as NVT6 but different internal and coating improved

[@harizdean3448]

@@terencewong1874 The new Jerry 31S uses the NVT 7

[@ミントチョコ天ぷら]

I've put together some information. I hope it helps. NL2 / 10-40 mfL Brightness on a clear night with a half-moon or a cloudy night with a full moon. Dark-adapted eyes can manage to tell things apart, but they can't tell colors from this level. NL3 / 2-10 mfL Brightness on a clear night with a crescent moon. Even dark-adapted eyes will look fairly cloudy and won't be able to see more than 50 meters. At this level of brightness, first-generation night vision isn't available, but second-generation night vision still looks bright. NL4 / 0.7-2 mfL The brightness of a clear night with a view of only the stars. It would be really dark if it hadn't snowed at all. Even at this brightness, the 2nd generation night vision offers an award to manage to see. NL5 / 0.07-0.7 mfL These include cloudy days when the moon is not raised, or the countryside without a street lamp. It is hard to tell where you are, and the darkness is at the level where most night vision goggles become obsolete. From this stage on, the second-generation night vision goggles will show sizzling noise, like old CRT TVs, and require either a second-generation + night vision or a third-generation night vision. Digital night vision goggles, such as psyonic aurora, cannot be used in darkness at this level. NL6 / less than 0.07 mfL This includes a cellar or a deep cave that is shielded on all sides, and it means the level of darkness that requires artificial lighting to see something. You have no choice but to turn on the IR light even at the risk of being caught because you can barely see anything with the light-amplified night vision goggles. From this stage, you should use infrared thermal imaging monitors. The J-31 appears to be NL4 to NL5 and shows performance of 2 to 2.5 generations. Although it lacks performance as a military night vision goggle, there seems to be no other night vision goggles for leisure and sports to beat the J-31 in terms of price performance as of 2024. If you want military specifications, you can pay an additional $3800 to upgrade to two 1900FOM T-6, but it still costs less than half the price of a military night vision goggle.

[@coldharboursupply]

Thanks for the useful information my friend!

[@christianschafer3413]

I know that you have covered that the photonis GP is brighter than the photonis wp. Is this the same for the Jerry 31?

[@alexanderschooler579]

Do you all ship to the US??

[@tanggang6824]

This vid got me bricked, I’m def getting a pair

[@spaceman152E]

Do you ship from Canada to USA?

[@Jrude22]

Damn $2000 is budget? I guess I am fckin poor. Was expecting like less than 1k. ( damn alot of comments after a month 😂, but these shows that I am really poor 😅 budget for me is less than a thousand. ) I’ll buy a Temu nvg lol

[@ORSurfbum]

Saved me from watching. Thanks champ

[@Jrude22]

@@ORSurfbumyeah dude, when I saw the price I was like fck this shit right away. Only rich people can defend themselves.

[@ranranpoopants]

Dude they’re 4k

[@WarchiefSkeletor]

Quit being a wagie

[@CarbonModZero]

“Budget” doesn’t always mean “cheap”. Night vision is expensive to begin with

[@pkl714]

Can the tubes on this device be upgraded in the future?

[@TheFORUNNERGaming]

do they run 16mm or 18mm tubes? I assume infiray is running NNVT tubes? For the price point with manual gain... thats a killer deal.

[@coldharboursupply]

18mm NNVT4s

[@bthemedia]

17:10 Jerry actually sees BETTER into the dark areas at the top of the tower. Seems to be a compromise of blowing out the highlights or the dark shadows across the 3 examples.

[@fermartinez-qd3ec]

Hey! I got mine some time ago and the performance is amazing. I was wondering, would it be possible to install Carson lenses in the j-31? Thanks a lot, great great review!

[@coldharboursupply]

Not currently possible as the threads are a radically different size.

[@fermartinez-qd3ec]

@@coldharboursupply ouch... That was my guess. Anyway, maybe in the future someone creates an adapter or something. Thanks for the response! Keep it up with the content :)

[@Michael-maximus]

⁠ Just following the rest here…. AMAZING REVIEW!!🤙🏻 Really good description of the different features and “misunderstandings” that are out there. My team of 5 members are looking for changing NVG and thanks to this, we are going with Jerry-31😎 We love the reviews and your shop ❤ Keep up the good work @coldharboursupply

[@travislupum]

Im still stuck between a set of these or a supergain 14

[@willthrill94]

This is so exciting

[@Armadillo1792]

Does it ship to the states now? I know they didn’t a lil while ago

[@magnumspartin1]

what are the 2 holes to either side of the power button? Are they IR and if so do they emit constant light like old school nods?

[@coldharboursupply]

Watch the video to find out!

[@nipsy_lafett]

Wtf where were yall at a couple of months ago !!!!

[@joetafolla4757]

Am I able to adjust the articulation stiffness? Got mine a month ago, love them. Only issue is I want the articulation more stiff. When they are articulated up if I do a fast head nod down they do come down a bit. Wanted to confirm before I started messing around with the screw.

[@coldharboursupply]

The inner screws on the rear of the bridge can adjust a bit, but be careful not to over-torque them.

[@joetafolla4757]

Thanks for the getting back to me so quick!@@coldharboursupply

[@d4ngru5h83]

Here in the uk, nvgs are way more expensive than in the US. But these are decently affordable, I've just seen them for £3100 ($3900!), or the monotube version is £2100. I've currently got a gen 1 pulsar, that is basically useless without a ir torch. With the torch, I can see out to 300m plus relatively clearly. The other gen 2 devices I've seen was a monotube with FOM ranging from 800-1200 for £1700. Or another gen 2 monotube with FOM at 1250-1600 for £3000+. A gen 3 monotube seems to be minimum £4k-£5k So trying to decide what gen 2 to get as that's probably about as much as i can afford for the time being. The monotube version of these is very tempting, but then if I bought the dual it's almost like getting the second tube half price😅.

[@mouthbreather280]

The prices in the video are Canadian dollars. So less in USD.

[@d4ngru5h83]

@@mouthbreather280 i must not have heard him say how much they were in the video, I was just comparing the prices stuff is in the uk

[@d4ngru5h83]

@@mouthbreather280 and hoping for some suggestions as to which one to go for, in terms of value for performance.

[@J.Connor]

I have these in the UK bought from the guy you’ve been looking at, I can tell by the price. And I say 100% worth it. They are amazing. Compared them to Argus 1431s with photonis echos and there was basically no difference in real world use.

[@d4ngru5h83]

@@J.Connor you have the monocular or dual?

[@AmazonWebService98]

they look cool. I got a pvs14 and dtnvg but they look nicer then my dtnvg esp since a big giant spec was formed even tho I didn't even use the bloody thing, it was in my backpack inside my truck in the garage

[@flipside21]

Great intro price for binos. Do they have any intention of knocking this out as a monocular?

[@coldharboursupply]

Take a look at the Jerry-14 on our website

[@flipside21]

@coldharboursupply thanks. I is smart. I was looking right at that page the other week. Have a great start to the day, neighbour.

[@TheLonelyBarber]

Hey brother great video and information! Looking for more info on the external battery. My connector for the pvs-31 type 5pin external battery doesn’t work with the Jerry 31. Do you know a cable that will allow me to keep my current battery pack and attach to the j31?

[@coldharboursupply]

You need to get the Jerry31 specific battery pack or make an adapter cable. It's as 7-pin LEMO with different pin-outs. If the Jerry31 sees wider adoption, we'll invest some time into developing an ecosystem for it.

[@ChristopherCastro-v7h]

Can these be shipped overseas?

[@chriszachem2012]

Can these be bought in a single tube configuration? I only have one good eye (light buld explosion)and don't need 2 tubes

[@coldharboursupply]

Yep. In the video we go over the Jerry-14, which we will drop a review on soon as well.

[@Kaotix_music]

ngl, kinda wish they offered just the housings and lenses for these so i can drop my Omni 8 tubes in them.

[@coldharboursupply]

Never say never, we are looking into options.

[@aesthetic8780]

Just buy the housing. Where is the problem? But they only accept Photonis tubes.

[@coldharboursupply]

@@aesthetic8780 That's incorrect. Photonis makes intensifiers to the same sizing standard as all 18mm MX-10160 that L3 and Elbit use. Any housing that "fits Photonis tubes" should also fit L3, Elbit, Katod, etc intensifiers.

[@aesthetic8780]

@@coldharboursupply Obviously. But this is not what I meant. As I know you can only throw photonis/nnvt tubes in it. L3 dont fit without modifying the housing. L3 has different placed connectors on their tubes!

[@aesthetic8780]

@@coldharboursupply The Jerry-FB (same housing just with thermal detector) works the same way. You can't just throw L3 Tubes in it. You have to modify the housing heavily.

[@tylerotool78]

I have a pvs 14. Elbit tube 2300 fom white phosphor. I understand these are gen 2 compared to my gen 3 but really how big of a difference is it? Would I be disappointed? Also how hard is it to sell a pvs 14?

[@bmbullman]

What would you sell it for? I'm looking to buy one.

[@Peter-c5n5l]

Can only hope i can get a budget job to pay for this budget item

[@CC-oi8gr]

So this isn't compatible with the CHAD/Polycarb lens protectors found on the sight yet?

[@coldharboursupply]

Not yet, we are developing accessories for it, so the ecosystem will mature for the Jerry-nods.

[@Goji54-f7g]

The people complaining about price are the same people who spends hundreds to thousands on fast food, starbucks, cigarettes, dip, energy drinks or alcohol. You most likely can find a way to afford it, you just choose not to out of inconvenience.

[@tylerw1418]

How do I purchase this exact setup, helmet and mount as well?

[@coldharboursupply]

Check out our website, link in the description.

[@Tattlebot]

The ocular lens of the Jerry should not be used with WP. It is obviously meant for GP which has a mainly monochromatic spectrum which will avoid chromatic aberration. The WP result looks like a deal breaker.

[@Ranstone]

White phosphorous is monochrome. Also, the lens has nothing to do with the color output of the image intensifier. You're staring at a sheet of phosphorous, with no practical, optical connection to the front lens. Essentially inverted shadow-puppets. The color of the wall you cast shadow-puppets on has nothing to do with chromatic aberration. If there's artifacts from the lens, it will show up long before any phosphorous picks it up and converts it to monochrome. My only experience is issued PVS-14s, so If this is a different technology, or I'm missing something, let me know. I just think you might be confused.

[@Tattlebot]

@@Ranstone please start by finding some good videos about color and spectra

[@Mr_Glenn]

​@@Ranstone White phosphorus would be a very bad thing to have, but it's a phosphor screen. White phosphor is not fully monochromatic. Otherwise it would always look pure blue or pure green.

[@jakejohnson1146]

You should compare these to the Nocturna

[@Mr_Glenn]

I'd love to have this if it was autogated. Maybe later...

[@Zulgeteb]

lol saw Budget Night Vision to find out its 4k-6k dollar depending where you buy still cool rig though

[@aesd7467]

what helmet mount is that?

[@coldharboursupply]

Cadex Low Profile NVG Mount, our favourite mount!

[@TexasPapa13]

4000 is out my budget currently. 😢. Stuck with my digital NV for now.

[@sdpy15]

What's the difference between the 31 and the 14?

[@coldharboursupply]

Big diff will be one is a binocular, and one is a monocular. They are otherwise very similar, same range of tubes, same glass, very similar user interface.

[@felinor693]

Any chance you guys are gonna make CHADs for this?

[@coldharboursupply]

We are looking at making a full suite of accessories for this as the product line matures. So keep your eyes out!

[@zoopzoopzoopzoop]

When you see that the price is 4k, dont think that you need cheaper gear. What you need is a higher paying job.

[@7seasons31]

Caught that “nice”

[@mgoedec]

Does anyone sell these in GP?

[@WeatherMan404]

gen 3 tubes when?

[@ryanmuro]

Are the Jerry 31 digital or do they use image intensifiers?

[@palmettostateoutdoors86]

Analog

[@Error_404_Account_Deleted]

You sold me at Gamecube. However as someone with a decade in optics…you said “refer to the manual”. That almost never happens. People would way rather call customer service and SCREAM at some poor tech. 😂

[@timmy101able]

Do you have a link to where we could buy the Jerry 31?

[@coldharboursupply]

Link in the description.

[@kaz7694]

when i buy nod it will be these

[@jeremykuronya4391]

Checked out the vid. Is the comment section for real😂.

[@RitchieBrosMagFed]

This guy's dreamy 😍

[@coldharboursupply]

Not as dreamy as your guys at 12:05 in the vid ;)

[@mig1nc]

Who is Jerry?

[@mr.stogie766]

For 2k cant say nothing bad

[@your_average_enthusiast]

Would you rather use the jerry dual tubes or a nicer monocular?

[@yakivpopavich]

I think getting a nice modular monocular thats Gen 3 and filmless would be better. And also that way down the line if you want binos you can just purchase another of that tube with similar specs and bridge them and get them culminated. But at the same time the Jerry 31's can be purchased as well as a C5 Clip On Thermal Imager for about $8k. That's very cheap for duals that have a thermal overlay, only catch is the tubes are 90's tech and lack anywhere from 500-800 FOM compared to Gen 3. That's also not even considering the increased clarity with Gen 3.

[@eugenechurch6135]

Can you upgrade the Jerry's? Better glass and tubes for the future

[@coldharboursupply]

Glass no as they are proprietary. Tubes technically yes, but you are going to see larger upgrades going into a different housing with PVS-14 glass. The Jerry series is more intended as a "foot in the door" option for new NOD users.

[@n0xxm3rcyxx]

thats not bad.

[@chriszachem2012]

Anyone have a pvs14 with a monocular style for sale?

[@coldharboursupply]

Yes we do, check out the Jerry-14 on our website.

[@joetafolla4757]

i know you intend to make accessories for the Jerry-31 if they become more popular but if possible, id love to see better quality glass replacements with a 30mm objective lens that can fit in the jerry-31's. this would allow us to use iris and other accessories that can be used on the PVS-14 and the 1431's.

[@jsk8drummer]

Have you had a look at the green phos Jerry 31s? I've seen anecdotal claims that the green seems to have better clarity and less chromatic aberration than the white phos. Wondering if you could shed any light on this?

[@mateoecheverriecheverri2077]

Compared to a tipical NVG market, is cheap.

[@nightwalker3437]

lol wish I could afford this rn

[@7tripple0s]

g69 nice