Ingersol Rand 114GQC Air Hammer

[@thisguysgarage]

Ingersoll do make very good pneumatic tools. I have had a few never any issues. 👍

[@BruceLyeg]

The do indeed. I've got an old IR 1/2" impact gun that has to be at least 35 years old. Never ever oiled it and it still works. One of the older mechanics gave it to me when I started working as a fleet mechanic at a taxi company in the 80's

[@thisguysgarage]

@@BruceLyeg i bought the ingersoll half ton gun back in the 90's if it wouldn't turn it ,it would break it . did a lot of leaf spring stuff back in the 90's was why i bought it.

[@BruceLyeg]

Ya, leaf springs are not fun in the land of rust.

[@DIYVariety]

I agree they make great tools,

[@BruceLyeg]

They do indeed

[@AntonioClaudioMichael]

I always put a ball valve before the quick chuck coupler so I can cut air off to make installing tools on coupler so much easier bruce

[@BruceLyeg]

Just seeing this comment now, great idea Antonio. I'll be doing that, thanks

[@AntonioClaudioMichael]

@@BruceLyeg your very welcome

[@AntonioClaudioMichael]

Nice air hammer bruce

[@BruceLyeg]

Thanks Antonio

[@SteveRobReviews]

Looks identical to my IR. Love the QC chuck as well.

[@BruceLyeg]

The QC chuck is definitely the way to go, those retainer springs suck

[@NewDimension7]

Yuhu enginer ready Thanks You for sharing Yeay.. Woodworking Super ..

[@BruceLyeg]

Thanks!

[@AntonioClaudioMichael]

Sweet deal for 79 bucks

[@IanYGath]

Always a handy tool to have. IR are a decent brand too. 🙂👍🏻👍🏻

[@BruceLyeg]

Yep, might not use it often but it's good to have.

[@MusicWorldKaraoke]

great job Bruce my dear friend!

[@BruceLyeg]

Thanks Marc

[@DadDiaries]

I've a got a really old IR air hammer. Never really use it much, the quick release is a nice feature. Reminds me I really need to fix my compressor! Another job on the list

[@BruceLyeg]

The QR is awesome. I don't use my compressor nearly as much as I used to but for some things it's irreplaceable. If you're like me, that list is never ending

[@AntonioClaudioMichael]

That plastic peice helps keep the oil in the tool its not a theft device at all bruce

[@upsidedowndog1256]

I like IR tools too. I have never used an air hammer before but use their cousin, the rivet gun, all the time. They have slower hammer speeds and a precise teasing trigger, my good ones it is possible to deliver a single blow. Good score.

[@BruceLyeg]

Thanks! BDOG above said something similar in his comment about riveting

[@AntonioClaudioMichael]

Great video bruce

[@bdogjr7779]

Awesome Bruce《☆》IR is a good brand. I have a cheap air hammer that came in a set. I don't think I've used it on any real projects yet but I did by a tie rod & ball joint knocker for it🤓👍🏾I've got quite a few hours under my belt bucking solid rivets when doing aircraft sheet metal & structural repairs. Rivet bucking guns are essentially the same thing but with better triggers & usually put a regulator in line so you don't pull a machine gun Kelly on the skin of the airplane🤔Sometimes it's a 2 man job if you can't operate the gun with one hand & hold the bucking bar with the other. Clear & precise communication is very important in that regard :*: Greetings from⛾Florida🤳my friend🤓🗣🔊☮✌👍🏾

[@BruceLyeg]

Thanks BDOG. Upside downdog mentioned doing a similar thing below. I could see how it could go sideways without clear timely communication

[@joeroyalgarage7995]

I like that quick change chuck. I’ve seen them but never paid any attention until now

[@BruceLyeg]

It's great! I hate those spring retainers

[@justwrenchit9287]

At my previous job, we used similar IR air hammers. They held up pretty well considering they never got oiled and always abused. Some lasted my entire tenure of 8+ years without fail. It should serve you well. I do like the quick release ours still had the retainer spring.

[@BruceLyeg]

a, I hate the retainer springs. In all the time I've used air hammers I've never oiled one lol

[@TheCowgirlNiamh]

That was a good buy Bruce! They have a good reputation 👍

[@BruceLyeg]

Thanks Niamh. I thought it was a pretty good buy too

[@marcdaigle7701]

Great Demo, Bruce... You could open the "MC Hammer Massage Parlor", but you "Can't Touch This ! ", since everyone must be 6 feet apart, hehe...

[@BruceLyeg]

lol, that's terrible Marc

[@marcdaigle7701]

@@BruceLyeg It was a "hit or miss" joke, Air MC Hammer...hehe...

[@GrampiesWorkshop]

How's she goin'? That looks like a nice air hammer. The quick attach is handy to have as well. Thanks for the heads up about the price at PA!!! Take care!!

[@BruceLyeg]

Darnit! I forgot to look for the needle scaler attachment while I was there!

[@GrampiesWorkshop]

@@BruceLyeg They were on sale last week here in NS. If you mention it to them at the desk I think they will honor a past sale for up to 2 weeks!!!

[@BruceLyeg]

@@GrampiesWorkshop I'll try that

[@sharkyblub686]

any idea how to remove the black valve blocker that comes attached when you buy a new one??

[@BruceLyeg]

I can check for you tomorrow if you still need

[@israfimia3897]

এই মেশিন বাংলাদেশে কোথায় পাওয়া যায়

[@BruceLyeg]

আপনাকে এটি অনলাইনে অর্ডার করতে হবে। অ্যামাজন হতে পারে

[@AntonioClaudioMichael]

Do not eat that bag of candy its bad for you lmfao 🤣🤣

[@BruceLyeg]

I've got a whole drawer of them, saving them up to give out next Halloween!

[@AntonioClaudioMichael]

@@BruceLyeg lmfao Bro