iniBuilds A320neo | Tutorials made EASY: Part 2 - Programming the FMS | Real Airbus Pilot

[@theAKmooseburger]

After nearly 3 hours of watching videos and trying to figure out this magnificent beast I got her flying from KPHX to KLAX via IFR high altitude airways THANK YOU SO MUCH!!!!!

[@LeovBakel]

This is a superb tutorial. Now the A320 v2 follows the flightplan as it should. Before it went in all directions instead of the right one. Great video! Thank you, Danke schön, Bedankt (NL)

[@martinschoeller8528]

Thanks a lot for this great tutorial series. I’m really happy as a Xbox user that we finally have a great modern Airbus available. For mastering this aircraft your tutorials are very helpful.

[@A330Driver]

Thank you! Best of luck mastering your new baby!

[@lordraven2264]

Another awesome video! Thank you. I keep laughing because I am missing 1 little step that stops me from having to auto complete, but you're instructions have fixed that. Look mom, I'm flying!!

[@andrearicchi]

@A330Driver is there a way to manage Stepclimbs properly? With Simbrief I have created a flight plan with an inital step at FL310 and then FL390. No such information is available in the FMS and the initial EFOB is below zero.

[@AirbusGuy01]

Always a pleasure to learn from you!Cheers from Scandinavia!

[@pmmsmn]

Very useful. I appreciate the objectivity and simplicity of your explanations. Thank you very much. Auf wiederhören🙂

[@brunogt1982]

We appreciate your time pilot 👨‍✈️🫡

[@bearhug905]

Big thanks, extremely helpful!

[@aa_sergeant_kk6624]

Hallo Emanuel, ich habe die Simbrief ID eingefügt und kann auch meine Flugpläne im IPad laden. Jedoch gibt es den INIT Request Button nicht bei der INIT A Page. Ist das ein BUG oder kann man da etwas falsch machen?

[@linusmuller7062]

Bei mir auch!!

[@udprdjm]

At 6 min in on the init page you say use arroe keys to move to weights page, I get "not allowed* any ideas?

[@jameslawley5414]

Init request does not show up on the INIT page. The simbrief FP does download to the EFB. ANY ideas, anyone? These videos are really good but I cannot use them because of this issue.

[@gangwang4021]

press MCDUMENU button, than ATSU and enter your simbrief id into Pilot ID

[@jameslawley5414]

@@gangwang4021 Ah, thank you! I like the FBW A320, but there is a lot of interest in this model so I am keen to try it out. I could have tried it by inputting everything into the MCDU manually, but that is very tedious.

[@ThatPlaneGuy_Official]

How comes mine says “ERROR DOWNLOADING DATA” when I press “INIT REQUEST” when I’ve been able to put my FP onto the EFB!

[@hendrik_Ah2k1]

Thank you. Is it possible to insert additional waypoints into the flight plan. Can you perhaps show it in a next video? Even if it is not a real scenario, that waypoints are added manually. How do real pilots that in the plane before depature? Are they loading the flightplan from an electronic flight bag into the mcdu?

[@Belgianaviation]

I've got im on the flight management computer the INIT REQUEST button only shows up after i clicked on the button and dissapears when i stop maintaining tbe click on the button can someone help please ( im on xbox btw)

[@MaynardLackovic]

You must put you pilot if in the doc aswell go to menu

[@YTJSGaming]

Great information what atc do you use while flying default or do you turn it off?

[@rburke17]

Is there a reason why I am not seeing INIT Request on the INIT page?

[@A330Driver]

Datalink not set up?

[@rburke17]

@@A330Driver not sure? I followed all your instructions to the tee and used simbrief to create a flight from KDEN to KSLC

[@rburke17]

@@A330Driver When I go to the init page, there is no INIT Request option. It is blank. When I click on the button where it is supposed to be, INIT request shows up grayed out and I get the message "ERROR DOWNLOADING DATA"

[@joesparrow896]

Thank you very much, for you tutorials

[@StallionFX1]

Hey Emanuel, I have a small issue. When I enter my pilot ID on the EFB, it doesn’t accept and I can't sync any simbrief data on the EFB. But I can still upload flight plans via the FMC. It's wierd. Any advice?

[@A330Driver]

Are you sure you're entering your ID (that's the number!) and not the username? If that doesn't work I suggest to contact support or post in the iniBuilds discord as they've built the plane.

[@StallionFX1]

@@A330Driver yes, I have been entering the number and not the name. I figured maybe there was a specific process to go about it, but might be something else entirely. Thank you for your response and keep up the great content!

[@jp-pal75]

On Xbox there is a issue, you cannot use the Xbox keyboard but you have to activate the EFB keyboard.

[@callumayoutube]

@@StallionFX1same issue here

[@StallionFX1]

@jp-pal75 that makes sense now that you mention it. I till try it. Thank you for the information!

[@rodrigoreyesc75]

Perfect, thank you 😊

[@andrewnicholls6065]

Good video but maybe include the fact you have to add your simbrief pilot ID to the MCDU menu or you can't load a flight plan from simbrief. I'm now at the point where as soon as I input the flight number and cost index the whole FMC just locks up 😤

[@itumelengselinda]

He covered that in part 1 of these series

[@tonyyhap3370]

Hi, IF I Don't have Simbrief, can I still use the IFR Flight Plan that I created within MSFS?

[@A330Driver]

No, this is not possible. Creating a simbrief account is easy and free though, I really recommend to do it.

[@KodahPlayz12]

Why does when I enter the FMC or attempt to add in my flight plan I can’t?

[@Hraby.]

how do you get on the aproach waypoints the altitute? i dont have it

[@5mudgee]

Nice video just a question while about to decent im inputing the altititude and it wont go down unless i change the vs - selector to manually.For some reason the managed mode wont drop to the altitude

[@A330Driver]

Hi, you got to push the altitude selector in after setting a lower altitude. It's not a Boeing that would descent on its own when passing the T/D.

[@Brando-wc8fz]

I do not see a link to create a flight plan

[@FlLIPEK.M]

Even though I linked my SimBrief account and created a flight the init request is gray and doesn’t work

[@jackdaw556]

I have the same. Did you figure it out ?

[@FlLIPEK.M]

@@jackdaw556 Yeah one you put in your simbreif pilot ID on the tablet you also have to go onto the MCDU - find “MCDU MENU” - click “ATSU” and plug your simbreif pilot ID there too.

[@jackdaw556]

@@FlLIPEK.M hmm I did that both on tablet and MCDU and still when I click init request it goes greyed out and whole cockpit is unclickable...

[@jackdaw556]

I figured it out. There is some bug if your plan has alternate airport. I removed it from plan and it worked

[@tuntowatkins1375]

Will this work without simbreif?

[@major3336]

Anyone else having an issue with steering at touchdown and the APU never turning off?? My APU will (never) turn off once I turn it on. Also, This aircraft has made me a little more confident that a PMDG aircraft or the ATR72 might not be to hard to program a flight plan. I might buy more of these aircraft now that I got the ropes of a modern FMS on this aircraft.

[@pauldevaney7713]

everytime I load the A320 I cant connect to vpilot, I load pmdg it connects

[@chrisgoddard1855]

Brilliant thanks

[@gabry6062]

on my fmc there is not init request , why ? i have done the configuration with simbrief but still not working can you halp me please?

[@A330Driver]

Please contact support or write in iniBuilds' discord to get help with bugs.

[@jaysilverton2286]

Keep Getting The init request has an error and i never got it as a orange font. Do u know how to fix this

[@lorenzobucca4855]

happpened also to me and I missed the Pilot ID in the MCDU - yes, you need to specify the PilotID not only in the EFB but also in the MCDU Menu -> ATSU Menu - PilotID - I lost some time over this

[@Belgianaviation]

I've got an issue, im on xbox and im trying to connect my simbrief account to the plane's EFB i've put my simbrief ID in the options but there is still a message telling me that no ID was found. Can someone help please?

[@samcollins2351]

Try using you simbrief alias, which you can find if you go to account settings on simbrief. I had the same problem and this fixed it.

[@Belgianaviation]

@@samcollins2351 thank you for your help

[@chrisgoddard1855]

I linked my Simbrief account, got a green for loading flight plan but MCDU does not have any Init Request option like on FBW - what am I doing wrong? Looks like back to the FBW version

[@A330Driver]

Not sure what's wrong to be honest, best to open a support ticket or write in the iniBuilds discord.

[@udprdjm]

I saw the same, I think I solved it by adding my simbrief Id to the Pilot I'd on the atsu menu

[@chrisgoddard1855]

@@udprdjm OK will try that - had sent in a support ticket as well

[@pixel-sea4190]

@@udprdjmcannot thank you enough 🥲🙏🙏

[@brunogt1982]

I’m getting, error downloading data when attempting to request fl plan🤷🏼‍♂️

[@brunogt1982]

I figured out step 1 go to MCDU MENU/ATSU/PILOT ID/ enter the pilot id.

[@A330Driver]

Shouldn't the pilot ID have synced from the EFB?

[@brunogt1982]

@@A330Driver yep but it did not for some reason 🤷🏼‍♂️

[@Eyonim]

@@brunogt1982 you are a legend

[@AVIATIONSOUNDEXPERT]

When do you use ICAO-A and ICAO-B Noise Abatement Procedure?

[@User-wh3xo]

Usually mentioned in the charts.

[@A330Driver]

Never, these are outdated terms. They're called NADP 1 and 2 now.

[@stefanteofilovic-fr1dx]

my simbrief don t walk i need help pls

[@emanuelgalatolo1954]

The ini 320 is very nice but I don't understand why with AI traffic active on landing and taxi it loses a lot of Frame. The 310 does it too, they suffer from stutter in certain situations Pmdg never does this, even when there is so much cpu load it always remains smooth

[@A330Driver]

Perhabs its related to their TCAS? I didn't notice such issues personally yet, but TCAS would be the one thing coming to my mind here.

[@emanuelgalatolo1954]

@@A330Driver I don't think so... He often does this on the ground with the tcas turned off, and many other people have noticed this. I have a 3080ti (very expensive until a few months ago) and an i7. But I keep noticing high cpu loads while the video card is underutilized. I repeat with pmdg and aerosoft never stutter in any situation

[@mamo-gaming]

❤

[@d33rub16]

Please pin this: if you can't do init request under the INIT page below "from/to", you must go to MCDU MENU and press ATSU, and set pilot ID there. you won't have to do this again so it's for first time users only.

[@dias_se]

Tack!

[@A330Driver]

Thank you so much for your support! Really apprechiate it!

[@Fly737]

❤❤❤

[@julianhuckstadt7123]

Which link?

[@A330Driver]

The one in the description. Right at the top.

[@bruceirving7080]

@@A330Driver I'm not sure why, but I can see no link for the SimBrief flight plan in the KZbin description for this video. The description starts with a YT link to your Fenix A320 Tutorials. Is it a public link? Thanks.

[@electrikkar]

@@bruceirving7080 I also can't see the link to the simbrief flightplan. Maybe only available for paying subscribers?

[@jackdaw556]

@@bruceirving7080 I dont see it also....

[@RBLXBBCAmbulance]

When can we see the other videos?

[@A330Driver]

They are available for channel members right now.

[@RBLXBBCAmbulance]

@@A330Driver so how am I meant to learn how to operate the systems???

[@RBLXBBCAmbulance]

@@A330Driver ohhhh I see so you release them to channel members first?