INITIAL D | Building Kozo Hoshino’s “God Foot" R34 GT-R | 1/24 Pre-Painted Model Kit | Aoshima

-Nissan Skyline R34 GTR Model Kit(Painted): www.plazajapan...
-Super Advan Racing V2: amzn.to/4h5aav7
-License plate maker: aoshima-car.co...
-RB26DETT Display Engine: junsminigarage...
Hi guys! In this video I will be building Hoshino Kozo's "God Foot" Nissan R34 GTR from the fourth stage of the INITIAL D anime.(The epic battle between Project D's Keisuke Takahashi and Purple Shadow's "God Foot" was one of the best battles!) This painted kit is produced by Aoshima. The factory painted Millennium Jade is my favorite GTR color of all time! And I am glad Aoshima came up with a painted version although it's not produced to replicate God Foot's exact version in the Initial D anime. It is still a pretty awesome kit!
---All the tools I use to build my model kits are listed here:
Model Building Basic Tool Set: amzn.to/2ElHtMh
A3 Cutting Mat: amzn.to/3t8GmUP
Tamiya Side Cutters: amzn.to/3z643lt
Tamiya Hobby Knife: amzn.to/3aJRTmx
Drill and Micro Drill Bits Set: amzn.to/4bBJxtV
Panel Line Scriber:
Tamiya Plastic Scriber II: amzn.to/34cDrRu
Trumpeter Panel Line Engraver: amzn.to/2TFD1MX
Scribing Pen with Guiding Tapes: amzn.to/3hPZQe7
Glues:
BSI Super Gold+ Glue: amzn.to/31aNVPb
Tamiya Extra Thin Cement: amzn.to/2SbDC8A
Elmer’s Clear Glue: amzn.to/3jfoEKD
Sand paper:
600 - 3000 Grit Sand Paper: amzn.to/32aryZJ
Micro MESH Soft Touch Sanding Pads: amzn.to/33eik0h
Painting:
Airbrush Kits with Compressor: amzn.to/325JHb8
Dual Action Airbrush: amzn.to/34brtrn
Tamiya Painting Stand: amzn.to/2Q7h8UX
Airbrush Cleaning Station: amzn.to/329T8WL
Paint Brushes for Hand Paint: amzn.to/3aGwPvU
Tamiya Acrylic Paint Retarder: amzn.to/33hrkln
Paint/Fluid Droppers: amzn.to/32aizHZ
Alligator Clips: amzn.to/3kWm2T0
Paint Mixing Jars: amzn.to/3g855RP
Primer:
Tamiya Grey Primer for Airbrush: amzn.to/30okush
Tamiya White Primer for Airbrush: amzn.to/3cLdxXb
Spray Can Grey Primer: amzn.to/2GgnKPF
Spray Can White Primer: amzn.to/2ScNRJB
Thinner:
MR Hobby Lacquer Thinner: amzn.to/3n5dFpa
Tamiya Acrylic Thinner: amzn.to/34ens3T
Tamiya Enamel Thinner: amzn.to/4dVVUlx
Masking Tapes:
Tamiya 6mm Masking Tape: amzn.to/348XezD
Tamiya 10mm Masking Tape: amzn.to/3ibshj7
Tamiya 18mm Masking Tape: amzn.to/3igOXOU
Tamiya 40mm Masking Tape: amzn.to/2Oln2EV
Tamiya Masking Tape for Curves(2mm): amzn.to/36mfSXo
Tamiya Masking Sticker Sheet: amzn.to/3EGWHFf
Other goodies I use:
TAMIYA Polishing Compound Fine and Finish: amzn.to/2G1X1q1
Tamiya Polishing Compound Sponges: amzn.to/3mBhXVA
Tamiya Panel Line Accent Color Black: amzn.to/2EJlPSQ
Tamiya Mark Fit Strong Decal Solution: amzn.to/3n3D82w
Surgical Scalpels: amzn.to/3dSlMTu
Duck Poster Putty: amzn.to/2Yix37r
Ranger Gunmetal Embossing Powder: amzn.to/2Q6AyJR
Hero Arts Embossing Powder(Red): amzn.to/30kfogI
Milliput Superfine 2-part Putty: amzn.to/2YgExrM
Mini Hand Saw: amzn.to/3mXY1Mt
Hasegawa Mirror Finish: amzn.to/3mXJeTy
GodHand Glass Cutting Mat: amzn.to/3pUtWAG
#scalemodels #initiald #r34 #aoshima #asmr
______________________________________________________
DISCLAIMER
Some of the above links are affiliate links, meaning, at no additional cost to you, I will earn a small commission if you click through and make a purchase, you are not obligated to do so, but it does help fund these videos in hopes of bringing value to you.

[@scaleffect]

Beautiful build again, the millennium jade color Aoshima used looks perfect. Great choice on the Advans, I swear those wheels were made for the GT-R, they always look good on them.

[@JunsMiniGarage]

R34 GTR in millenium jade paint with a set of Advan 3 spokes is probably the best combo a GTR could have. Aoshima did pretty well on this one. And thank you for watching.🙏

[@dangerruss5]

this is the most precise glue placement ive ever seen in my life

[@Andreasy2]

Exactly 34 minutes for a R34 build video 👍

[@Razoredge]

Always a good time to see you working, Jun, it's always so precise and so calming. Great build, as always.

[@KarlScaleModeling]

Another great build and video from you Jun 👍🏼 that R34 looks amazing and continues to show how nice the pre-painted kits can become once built right. Well done 👍🏼👍🏼

[@JunsMiniGarage]

Thank you very much Karl. The pre painted kits have continued to exceed expectations. I wish Aoshima could produce more of them because they have become my favorite lately.👍

[@kostasnasiou389]

Very nice build. The only downside with these kits is that the mold lines are not removed before painting. The same applies to the R35 pre-painted kit. Really nice choice on the wheels.

[@nothingzf8516]

Satisfying and great video as usual :)

[@busterscustoms]

amazing quality as always great looking build

[@AMIVITZRS]

What a nice clean GTR

[@squidikka]

That color is amazing. Want something similar for my NA miata.

[@ronway6222]

So excited for a new video! Great build!

[@BoxPop89]

Love this build! The details on the R34 GT-R are incredible-definitely a must-have for Initial D fans!

[@LordPBA]

Wonderful work! You are the inspiration to put my hobby to the next level. I focus on Italian models. Nice!

[@StrayzKid]

Great Work as Always!

[@Wesley_C]

This R34 is looked amazing always, just gets this car has it’s performance

[@OscarSouthall]

Great build as always, thanks for the amazing video.

[@murillobuono8782]

Great Job! Congrats from Brazil!

[@rayfrogger]

I love r34!

[@1ybr]

DURIYAAHH

[@JunsMiniGarage]

I remember that😂😂

[@htrestore]

Beautiful build

[@rocketpunchgo1]

Looks amazing

[@kozohoshino507]

Yeah, this is my GTR. ❤

[@roronoa_zoro_islost]

KOZO HOSHINO WHAT YOU DOIN HERE.

[@kozohoshino507]

​@@roronoa_zoro_islostDoryaaaaaa XD

[@roronoa_zoro_islost]

@@kozohoshino507 YES DORYAAAAAAAAAAAAA

[@MafruhaKartoon]

Doriya!

[@Kitzkrieg]

Nice! How about an R35 next?

[@johncater7861]

I'm beginning to wonder whether due to my aversion to toxic fumes and my inability to get my airbrushing technique right, that I would be better off with pre-painted kits.

[@berthaRe]

Uma das poucas coisas boas no fourth stage

[@teenyweenymonkey]

Hey jun, how do you decide when to use bsi super glue and when to use plastic cement? Great video btw, im always happy to see you upload.🙌

[@JunsMiniGarage]

Great question! I mostly use bsi on painted surfaces since plastic cement dissolves paint. If any plastic cement spills onto the painted body then it will be a disaster. In most cases bsi will do the job but for parts that could be easily knocked off(side mirrors, rear spoiler, for example)during frequent handling, I will use plastic cement for a more secured and permanent bond. When I want something to bond fast so I don’t have to keep holding the parts I will also choose BSI which can be cured instantly with glue accelerator.👍

[@teenyweenymonkey]

@@JunsMiniGarage ah ok, then is BSI gold glue safer on painted surfaces than the purple bottle? because in the past, i had a rough experience with my purple bsi glue totally deforming a paint finish lmao

[@lilnovate460]

Nice build I also want one, how much are this kit?

[@leoadhiwibowo8426]

3 2 1 DORRYAAH😂😂❤❤

[@chinwyian]

34 minute video I see what you did there

[@ImranOO7]

Nice build. Don’t know what you mean by ‘real men don’t read instructions’. Unless you know what you’re doing then that’s fine but otherwise real men do read the instructions properly so that they get it right, first time.

[@szmulen]

hey, I just noticed that the Tamiya Enamel Thinner link from your description doesn't work anymore

[@JunsMiniGarage]

Just updated the link with a new one. Thank you so much for letting me know.🙏

[@CycolacFan]

Did they remember to remove all the mould lines before they painted the body?

[@JunsMiniGarage]

They are there still if you look hard enough with a modeler's eye, but they are not very obvious since the paint covered them up pretty well.👍

[@CycolacFan]

@@JunsMiniGarage nice work 👍

[@IPRS5000]

WAIT MY UNCLE HAS THAT MODEL

[@adamalansyah]

where can i get water decal for Skyline R34 1/18?

[@JunsMiniGarage]

Try searching on eBay or IG, there are some sellers who would do custom decals based on your needs.👍

[@xaraxen]

I rather not use plastic cement on clear parts since it will fog them.

[@egebelli2591]

0:54 real men don’t use scissors to open packaging 🫡🫡