Initial thoughts: Craftsman S1600 Chainsaw

[@dellgregg4663]

Had one of these given to me as a gift. Definitely needs a full chisel chain. The stock chain is absolutely trash. I would definitely buy one of these over a Poulan.

[@lifebehindtheaxe3835]

I've been wanting to get one, but couldn't find any videos. Glad you grabbed one. I'm anxious to see what it can do with simple mods

[@oakiewoodsman]

I definitely was thinking about the 170 because rather than comparing displacement, price is the key especially with these homeowner type saws. Great video!

[@chase3253]

I needed to buy a small saw really quickly for a job and my others were being used....so far, I'm impressed at the 1600. Fingers crossed for longevity.

[@brandonblankenship5293]

The chainsaw cuts fine for someone who wants to cut some firewood or just do some work around the house. The chainsaw seems to run better off of premix fuel as well. It’s got it’s quirks but it does start an cut every time. 😊

[@dgoodman1484]

I bought a ryobi weed eater a long time ago with all the attachments. It was great. Lasted 6 or 7 years of weekly service. California was about to ban them and mine had about had it so I bought 4 more before they were discontinued. None of the four lasted more than two months. That’s Chinese tools in a nutshell for me. I’d pay extra for an echo just on principle. Anyone else find it strange that China can sell a non EPA clone saw in California but the Germans or Swedes can’t sell the original? Only one way that makes any sense 🤷🏽‍♂️

[@Ikyk278]

Love the channel

[@shawncapps1173]

Craftsman Power Saws are really great.

[@darrenwilson7688]

Not a bad saw Boedy. It cuts great. Try a longer bar and see what happens then.

[@homopit42]

It cuts better than I expected it will! When idling, it sounds like a 4stroke motor. My Zenoah clone (Alpina C41) is 10 years old and still going. Light use, I'm cutting around 10m3 of firewood with it every year. I changed oil and fuel lines, the original lines got crude quickly, and I changed one carb kit. That bog when accelerating is also present and I could not adjust the carb to completely eliminate it. The carb is Walbro. I even replaced that carb with the noname one from 52cc clone saw (much bigger venturi). The layout is the same, except there is no return fuel line (to the pump) and you need to replace the cover plate that has impulse nipple with the original cover plate and drill the impulse hole. The hole was on the 52cc carb, but plugged, I drilled the plug out. The saw is more responsive when limbing. Ordered a .325 clutch drum, I'm curious how will it run with a bigger chain.

[@aaronpowell4885]

Must also have a different carb than the older s145, s160 and s180 as mine either has the splined or pac man jet screw heads, can't remember which, would have to go look. After a muffler mod, base gasket delete and re tune, mine has snappy throttle response!

[@timothybyrom5560]

The Struggler! Mommy's favorite toy? Red rocket maybe.

[@ericnicol2616]

After port work you should bring that to Hopper stock. I have a poulan pro 220 that might make a decent comparison. Not certain it will hang with the craftsman after you port it but fun either way.

[@williambray4134]

I was wondering if the newer MTD saws had an adjustable oiler.

[@michaelmanzo1716]

Used echo cs 400's for $150 or less,would slap that thing silly, and outlast a half dozen of those cheap things. Torque-laden 42 cc's of homeowner goodness. I gifted two of them used cs 400's to family. They both had aluminum handles, and press-fit metal oiler gears. Wonderful little homeowner saws! They're always for sale used. Still very cheaply priced new as well.

[@ragercrepair9301]

Honedtly impressed for what it is. Be a great ground saw for a crew for people to destroy lol.

[@marklivingstone3736]

Seems a good saw for the $ Looks ok too 170 is only 30cc so that’s not really a fair fight Got to say 170 is a tough little bugger. Can’t seem to kill mine in full bar of ash and oak so…. Run it up against some other 40’s eh? MS 250? That’s 45 I think. So when you going to hot rod the 170? Should get lota views on that !!

[@bryantitus6634]

I get what you are saying, but this saw cost basically exactly the same as a ms170. That's where the direct comparison comes in. I'm also not a ms170 fan and I grew up on Stihl chainsaws. My brother has a ms170 and id personally never buy one new or pay more than about $50 for a used one. The echo cs3510 is waaaaay better in about every way over the ms170, 171, 180, 181, and 211. And being within 1cc of the 211 but being lighter than the 170 means a good bit.

[@crazyfeller5704]

👍👍

[@jeffreyrudolph5061]

Skunk works saws 👍

[@anitahelton4698]

Wondering what kind of magic you was thinking about doing to the saw ? About the name i worked for Sears twice was over small engine shop 30 years ago . In the hayday Ted Williams the spendid splinter had his name on boat moters chainsaws shotguns fishing rods . The first Ted Williams chansaw i saw whent from floor to your knee had a huge bow bar on it back when men were men. The splendid splinter might be a cool name

[@JS-uo8rq]

Where can I get this muffler modification?

[@fearghalmorrissey2601]

The power of Jeng Feng engine

[@sean7.399]

What bar did you put on that saw ... ?

[@shawnglacken3055]

I'm waiting for the results from the mods.🤠

[@fuelmanjoe8639]

DID THE OILER EVER START WORKING

[@stannelson2582]

So I just need a good sharp chain!

[@Doc-Cole_Trickle-of-Chainsaws]

👍🆙BigGuy

[@dubbssawshop]

All in all it dosent seem to bad, def not gonna win any races 😂 but it seems to have enough power in the cut. I really dig the color and style.

[@jbbolts]

I'd put money on it against a wild thing 😆

[@dubbssawshop]

@jbbolts stock vs stock, or ported vs ported, would be a good race to watch!!! 👍🏻

[@chainsawcanuck]

Runs not too bad for what it is

[@user-ih6ss5qt2m]

Great!

[@fearghalmorrissey2601]

Wait till the ring seats..

[@chevboy4.813]

Put a Walbro WT-215 Carb and muffler mod on the Stihl 170 and you may be surprised......

[@wickiuprat]

That saw is a beast 🤣😂 a beast of burden 😅😂🤣

[@Sawmods]

Just tear it down and port the dam thing lol I wanna see if it wakes up with porting and a MM

[@user-ym5pv5tq4p]

If the oiler isn't working that's the problom

[@coolestguyontheplanet723]

Chainsaw comment from me

[@anitahelton4698]

Im offended I'm one of those ignorant homeowners

[@novicelumberjack]

So was I a few years ago!

[@Stefanseiner]

just another Komatsu Zenoah G3800 clone