Injora Brushed ESC! TRX4M install & testing! CHEAP Upgrade!

[@CPRC23]

I love that you give honest reviews and definitely props to injora. I've purchased lots of their products and it makes me happy knowing they're open to constructive criticism

[@JUSTHAVEFUNRC]

Yeah they’re really stepping up with their new releases (for the most part. The BEC they released is weird).

[@SivartCustomRCs]

Those radios are sweet. It's a rebranded DumboRC. There is a lipo conversion for it. Many options for it once you learn how to get into the settings

[@Ivan-od7bp]

Do you know of any other receivers that are compatible?

[@JessdogCreations]

Can the Dumbo recever work or bind

[@shockman8014]

I'm loving these. These are as quiet as brushless. What I like most is the modulation without having FOC. No subtle lurch and It feels natural to me to increase throttle to increase power.

[@Slaters_RC]

Injora needs to stop robbing me. Every time I say enough they come out with something new 😂

[@polishguywithhardtospellna8227]

Have you seen theirs rubber/tpr or whatever, elastic waterproof inserts just like those 3d printed ones? Stiff sideways, but allowing for squish? I reckon they will rob you again

[@Slaters_RC]

Only ones i have seen is the new ones for 1.9 wheels. Nothing for 1.0. ​@@polishguywithhardtospellna8227

[@maxwell5428]

Esc is $20 U.S. that’s a steal tbh.

[@Hutch_Davenport]

I like Injora a lot. Great quality and great prices.

[@slam854]

I purchased this Injora T6 transmitter with the Hobbywing 1080 G2. What an amazing addition of control. I have it in the VRD Stance and it is superb. Low speed control is incredible and braking is phenomenal. Do not use inertial steering so that is turned off. I am new to crawlers and this combo will keep me happy.

[@canuckchuck8836]

Some companies get it...some don't. It is nice to see that Injora cares enough to respond positively to feedback!

[@echobeefpv8530]

Wow, great review as usual, and at that price point, it's a no brainer upgrade. I've watched your channel really grow, and you are a leading voice in the 24th market for sure. The biggest reason for that is you are completely honest in your assessment of products.

[@joshfowler197]

Any updates on release for these??

[@troypostie1252]

More "better than stock" esc options are always welcome. Cheers Matt👍🤔👍

[@parkerarcangeli5276]

Throttle brake and then reverse can be changed. I just learned it a week ago on my trx4m you hold the button till it blinks three times and it puts it in crawl mode.( only forward and reverse)

[@786esteban]

Nice video. Can you show how do you connect the lights to the receiver? At channel 3.

[@joediaz6055]

Injora Esc available? Just ordered the Injora Transmitter and Receiver for the TRX4m. Thanks

[@bluedragongaming3076]

been running my TRX4M Bronco with a Meus 102T motor with the Injora crawlers gears and the whine from the stock esc drives me absolutely nuts.

[@matthewcopeland4441]

Good to see a budget minded brushed ESC replacement! Transmitter is a Dumbo RC with another sticker-great radio. Leaving us on that cliffhanger "there are great things coming", come on!

[@joedavidjarvis7617]

It is really promising that they reached out, they want to make better products, not throwaway trash. I appreciate them for that and you Matt for giving the honest review. Had you not been honest they would never made this!

[@dachaoswarrior]

Nice upgrade, i try to make like you for the light but the button on or off don’t pilot my light(i have plug on ch3 on the receiver) have you configure any else? Thank you

[@hbrc3867]

Looking for a cheaper esc so I looked at your channel and found what I'm looking for 👍 Thanks again for all your reviews.

[@2fmrc]

@@hbrc3867 awesome! Glad to hear I was able to help. Appreciate ya checking out the vids

[@im.totushi]

Can you use the DumboRC with the Injora Brushed ESC?

[@joshfowler197]

I've been waiting for a cheap mini brushed esc. Hopefully it's in the ISDT70 price range. That esc on a radio with expo adjustment should help the low end jumpy feel

[@matthewcopeland4441]

I thought the same about that ESC on a transmitter with expo.

[@josiepratt3105]

How did you manage to tighten those wheel nuts? I had to keep the inner screws off.

[@justinluczak5611]

What 3s battery would you recommend getting if I don’t have any yet

[@Gibsonlife573]

My hat is off to them I've noticed they have always been a company willing to work with you they help me out

[@CharlieHeine-j6l]

What splitter did you get to use the light kit along with the light bar?

[@randall4411]

I need a couple for my scx24 when they get to it . I've been using a Radiolink radio for 3 years in my Granite . It works great .

[@OGMikey.]

It's great to have a cheaper brushed unit that is more hobby grade.

[@rekik66]

Any word if they will offer this for the scx24?

[@davidgonzalez2331]

I have to admit injora did send me a new esc when the first one completely burned out once I put power to it. But now the new one they sent me was backwards like yours on throttle but then I flip and it limits forward to 50 and my backwards is the 100%! Ugh

[@AndyT0918]

Very impressive for the money. Looking forward to the release and full specs

[@silvermannnnnnn]

Gonna have to do some sleuthing to find out your motor gearing set up.

[@tapevans87]

Hi mate how did you plug the light into channel 3 to make the switch work?

[@keelzebub2173]

Definitely buying. I had to change all my gears in order to get control like that with the stock esc.

[@ginzero]

Awesome video thanks! I'm going to try this with my first from scratch TRX4M build. Any other recommendations for crawler/trail?

[@CrazyQuadBrothersP3]

Injora has really been impressive! I have and been happy with a lot of their stuff. Great prices also! 👍🏻

[@derek517]

What 3s battery were you running in this video?

[@BONEZ-8]

Looking forward to this one. I cant stand driving the trx4m with the stock esc simply because that noise., its like nails on a chalkboard for me. Gotta give Injora some props for this move, very smart to get feedback from the right sources, and a big thanks to you Matt for keeping it honest!

[@tntrcsandmore7316]

My pro scale lights don't work after switching to the injora esc. Any solutions ?

[@erikl1003]

Exciting... but not much good info here I'm afraid :( Are those Traxxas lights that it's powering, or some other light system? I see they stay lit and don't have brake light/reverse light functionality. The key reason I'm glued to the little blue box is because I like the light system. When you toggled the light bar on with a radio channel, is it because your light has a built in light controller? Injora motors are rated for 2s, will their motors work OK on 3s? I only ever use Fwd/Rev mode, but does it support other drive modes? Finally, it would be helpful to have a head-to-head comparison of whine at low RPM.

[@mzondi1970]

Can you put a link up to the you're using you said purple label but I'm completely colored wine so I don't know which one it is

[@Empowerthesaints]

Out of curiosity what 3s batteries do you like to run in these little trucks?

[@d_n_r_rc_racing2449]

Are you going to do a review on the meus racing two speed for the trx4m?

[@2fmrc]

Got one ordered. Just waiting for it to arrive!

[@gingerlion4979]

do you have any idea wenn this esc will come out. i'm checking injora's website every day but it says nothing about it.

[@djgarland7974]

What about setting steering endpoints with the transmitter?

[@2fmrc]

It just has a dual rate knob. No end point setting unless there’s some sort of hidden menu by holding your mouth the right way and tapping a button or something like that lol. Which I’m not a fan of. That’s one reason the gt5 is so great at its price. Gives you actual end point adjustments that are easy to set.

[@TX010]

Absolutely quiet 😮😊😊😊 no squeaking!!!

[@timhyde5352]

Do you think we can plug it in to the aux slot on the v1 scx24 and use that transmitter great channel nice work..T

[@daylightdies7194]

Bought one and it’s great in my trx4m

[@2fmrc]

Glad to hear it!

[@Flexus-s8t]

my stock esc burned out and i bought 3 of em they all burned out do u think this one will survive it?ant can u make a vid how u like contected all the stuff

[@Rc_Alex_76]

Got one mb100 works brilliant

[@JessdogCreations]

My recever is bad will the remote bind with other brands 😢

[@2fmrc]

@@JessdogCreations it should work with most of the dumborc receivers. Like the x6f or x6fg receivers.

[@andrewrichey7374]

That’s awesome Matt, I will have my black Chevy TRX 4M Tuesday. I’ll have to check into that ESC and controller for sure

[@2fmrc]

I’ve got there new brushless system in hand now. May wanna wait and check it out! It’s super smooth. Haven’t got an answer on price or release date yet but I’ll be posting on it soon I’m sure.

[@Flexus-s8t]

and where is the servo suposed to get plugged in #

[@usmileeveryday]

What type of 3s battery you are running on the TRX4M? I like to go to 3s but will like some that works on the stock location or minimal modification. Thanks for the great videos and honest reviews!

[@jeffmackovitch9987]

I’m interested in a better radio for my T-word …And a great price point!

[@SammyM00782]

I have a question. If I honestly have no plans to ever go any bigger than 1/18, or buy another car/truck for that matter, is it worth it to go brushless? Or how about a sensored brushed? My understanding is they're better than plain brushed, but I'm also new to this. I'm doing my own indoor course, buddy has one too, and let's be real, it's easier to build an outdoor course for 1/18

[@gsxripper8418]

Can you please send me a link for your 3s battery? I need a small battery. I would appreciate it thank you.

[@octane2099]

I agree with the antennas I fly rc planes and some receives are now antenaless why would something 5 feet away need an antenna, you could probably get by by cutting it short like 5 mm

[@richardcranium5393]

It's one thing to be stupid, it's another to open your mouth and prove it.

[@luiscolon8635]

Can I run this set up on my k10 with a cider motor?

[@2fmrc]

No this one only works with brushed motors and the cedar is brushless.

[@luislll5842]

I’m thinking of buying it but do u know how I would be able to reverse the steering and throttle because I have port axles and with the extra gears it gets reversed and my steering servo is now laying down but I think I put it backwards too so it’s also reversed

[@2fmrc]

Yeah there is two switches on it that say St Rev & Thr Rev. you will just flip those and it’ll reverse the steering or throttle directions. Super simple!

[@RonnieBLoveLee]

Nice review...What Motor are you running?

[@Rc_Alex_76]

Matt I'm building a lcg injora chassis to pair with a mb100 got stock axles with brass on would you recommend overdrive in front or underdrive in rear

[@2fmrc]

Trx4m axles? I’d probably go overdrive myself.

[@samintrepid]

Can you run on 3s the 370 motor from injora or he run only on 2s :)

[@landeRUCK]

Sucks that they removed the motor/transmission tx/rx from website.

[@SingleSpeedRC]

The teaser at the end...bye bye Christmas money! Lol

[@TheLilhulk1111]

How much is it going to be?

[@frimonfrias7708]

Does Injura ESC compatible with sound kit?

[@2fmrc]

Not sure what sound kit you’re referring to? I haven’t used it with any so I’m not sure really. It should be though

[@adrianj8370]

Would this help my scx24 crawl slower without having to give it more throttle when i hit hard terrain.

[@2fmrc]

Are you still running the stock motor? If so it will probably help some but not a ton. The stock motor really struggles to pull at times when put in tough situations. It’s just a little weak.

[@adrianj8370]

@@2fmrc no I run a barrage motor with a 9t pinion gear. The crawl speed is perfect but sometime it doesnt move unless i give it alot of throttle. I was hoping this would help me build on a budget. Thanks for the advice i really appreciate it!!

[@Airbrushkid]

I only use 1 Transmitter and it comes with a foam wheel. Futaba 7PXR.

[@2fmrc]

It’s crazy cause I always use the rc8x or noble for my 1/10s & mostly gt5 for the smaller trucks but I play around with a lot of transmitters for the smaller stuff. I’m not as picky on them usually lol

[@Airbrushkid]

@@2fmrc Have questions. I have the FMS Smasher V2. I want to put a Furitek STELLAR TRANSMISSION WITH MINI GODZILLA BRUSHLESS SETUP. Who makes a metal skid plate that I can mount the Furitek Stellar transmission to? Don't want brass. Thank you

[@salvatorehayes2753]

Does It Have A Higher Current Overload Protection Compared To The Original ECM? Ive Got The High Speed Transmission And A Torque Beast X Motor. If I Floor It From A Dead Stop It Cuts Out Momentarily From The Surge In Current. I Didnt Have This Issue Until I Got The Torque Beast. The High Speed Trans And Torque Beast X Combo Uses Alot Of Power. Im Running A Dual 2S 1200mAh Battery Set Up.

[@salvatorehayes2753]

Update: It Definitely Supports Higher Current Motors Like The Torque Beast X With High Speed Transmission. No More Cutting Out When Going WOT Like The Stock ESC

[@nhmtrhd]

What motor are you running on that Bronco? And more importantly, can I plug my Trx4m 370 Injora mtr into this new esc?? I hope the heck so. If not then their super-duper 370 Trx4m conversion kit IMO is a dismal failure….I was unimpressed as you were when it came out last fall.

[@Tiger-vm5pc]

Can it go under water like traxxas?

[@2fmrc]

The esc is waterproof. Not sure about the receiver.

[@DRAAAGONEARZ]

for $25 it's a no brainer...any word on a release date?👽👊

[@timsheldon6367]

Does that Injora ESC work with the Traxxas light kit and retain the brake lights and reverse light? If so, that’s a pretty big deal!

[@matthewcopeland4441]

Probably not. The reason the stock light kit works is that the ESC and receiver are combined and that 3 wire light output carries all the needed signals. There are a few aftermarket companies that make adapters for the stock light kit to work with aftermarket electronics.

[@klaboemlol]

Great video! What battery are you using with this? I've been looking for decent alternatives to the stock one, would love to hear your comments on it.

[@2fmrc]

It’s a galaxy pack. So far they’ve been really good lipos. www.robotmarketplace.com/products/0-ft-2503s.html

[@HEAMTB]

Will this work with the lizard pro and micro Komodo ?

[@HEAMTB]

And will it work on Scx24 ?

[@2fmrc]

@@HEAMTB yes. I’d probably recommend this little transmitter though honestly. I’ve been loving it and you can get some smaller receivers for it that work great! Or the flysky gt5 is always a great option for a bit more. amzn.to/3VUKIPb

[@HEAMTB]

@@2fmrc thanks! One more question though is this basically a dumborc x4 or x6 ?

[@2fmrc]

@@HEAMTB yes. Same thing just rebranded I think.

[@HEAMTB]

@@2fmrc thank you !

[@Totallynotkaze]

Hey nice video! Nice information, but can I ask a question, I have the injora 48T 180 pro engine on my trx4m, I wanted to buy this esc, so what is the best controller that you recommend me instead of the stock controller (transmitter and receiver) I’m new to this! Sorry if it’s a bad question! Anyways i think I’m going for the one that injora sent you! Since I guess that’s the most compatible, I’m just saying because who knows if they updated it 😅

[@Totallynotkaze]

Is that the stock motor?

[@giopirmisashvili5514]

Thank you ❤

[@Flexus-s8t]

do you have underdrive or overdrive gears or are u using stock

[@2fmrc]

No over or under drive in this one

[@Flexus-s8t]

stock traxxas gearing? @@2fmrc

[@2fmrc]

@@Flexus-s8t I think this one has the crawl gears in it still.

[@Flexus-s8t]

ohh@@2fmrc

[@Simoroxigorum]

i might get their jeep body and this

[@RWilson296]

Just wondering, what are your thoughts on the Radiomaster MT 12?

[@2fmrc]

I haven’t ran it but the main reason I haven’t is the menu system and scroll wheel setup reminds me of the flysky g7p and I absolutely hated that thing lol. So I just haven’t spent the money to try it. I think the open source thing is cool but not sure that I really need it.

[@power21100]

@@2fmrc i wouldn't discount it, its basically the same scroll as whats in the radiomaster zorro, its knurled aluminum, and if i remember correctly the flysky g7p has a button not a scroll wheel.

[@OkRC.crawlers]

Anyone have any clue why when I plug my servo and motor and everything into I’m receiver my steering twitches like crazy! I’m using the injora t6 with the receiver that comes with it in a trx4m with a meus 2speed and injora 7kg servo. Not sure what’s going on but it’s frustrating

[@martinomatko]

Hi, how did you solve the problem with the servo?

[@CrawlinWa]

I ordered these two weeks ago and they're still not here 😐

[@adventureswithandy412]

Can you tell me what gyro is

[@2fmrc]

It’s kinda like the avc from spektrum. Kinda like traction control. If you start to spin out it helps straighten the car back out. It assists the steering to help keep you straight.

[@coajokazz]

Looks pretty awesome so far. Your car seems to be pretty quiet. What transmission are you running? Doesnt look like traxxas

[@rennestrubberg9737]

Oh thank God that stock esc whine makes me want to hit it with a hammer 😂

[@LMH710]

What radio is 9:37

[@2fmrc]

It’s this one below. Great radio for the price! I have a video on it as well. amzn.to/3VGHLBz

[@praetor47]

speaking of trx4m gearing... Meus has now a 2 speed transmission! maybe someone could test it... hint hint :D but seriously good job on Injora. shows how they care, unlike say Castle :P

[@2fmrc]

Got one ordered with their kinetic axles. Just waiting for it to get here!

[@praetor47]

@@2fmrcah yes! i need to get both! hopefully they'll have a christmas sale like a black friday one so i can grab them

[@Fortes_RC_Adv]

Nice upgrades👌😁

[@MitchellBolognaniRC]

That is awesome.

[@joshfowler197]

I just realized the transmitter looks like a gt5 without the screen and cheaper case

[@XX1VR]

Hi coach mat 👋

[@2fmrc]

Hey Bryant!

[@AgeOrmstad]

Thats was sweet 👌

[@ethrrr]

Esc looks fine, and I'm shocked how cheap they are going to sell it, considering how overpriced is everything they offer. Fresh example: DumboRC x6

[@jimbo4203]

Nice 👍

[@rct2]

Have one of these esc and it's slow crawl is not very good at all in my opinion

[@2fmrc]

What motor and truck? I’ve got two and both have been smooth. One is in the ascent 18 and this one. Reverse wheel speed is very slow in my Trx4m but it’s not bad in the ascent on 3s.

[@rct2]

@@2fmrc got one in my scx24/tarantula buggy with a 030 small motor, maybe the motors a bit small.

[@2fmrc]

@@rct2 yeah I haven’t been a fan of any of the 030 motors myself. Just never seemed to give me enough lol

[@Thepreppersbunkeroutdoors]

I feel like Injora could make a higher quality rtr at this point than traxxas

[@vq3.5__8]

This is how to 4m should have came

[@andrewrichey7374]

I am watching two months later it is February now

[@BigDsRc517]

It doesn't whine 😂😂😂😂

[@DoubleADay]

Not bad for $40

[@MrStupidpuppy]

The Rx TX looks like a rebranded Dumbo...

[@2fmrc]

Yeah I think it is

[@Braindog]

Can i have it?? Now? ;) Im using the 1080 in my Bronco already with 3s and it runs smooth💯. You can see it on my Channel;) I added the Jeep Body from Injora. I love the Injora Parts and the Support ist good. If i can purchase this i would save Weight and Space. Hey Injora take my Money I need 2 Another great Video from 2FM RC. Thank you for sharing the Good News and making cool Videos.