Nigel the Robot now has his own blog - see here: myrobotnigel.bl... This is my ongoing InMoov robot build. Hands and forearm build and issues with them.
Пікірлер: 18
@buildstoys7 жыл бұрын
Great video as always! The arms are complex for sure and take a fair amount of time to assemble. I'm currently working on getting my wrist and wrist gear to all fit correctly, a bit of binding that I think just needs to be filed down in the right spots.
@ChandraMCraft4 жыл бұрын
very good
@kylecampbellweb4 жыл бұрын
thank you
@srishtygardenresorts7056 жыл бұрын
hey kyle can thia hand lift a watter bottle with grip?
@CrackedSite6 жыл бұрын
Hello bro im doing this hand for University project can you tellme if you use PLA or ABS or other and how much filament did you used in the construction of the hand how long have you been building the hand and finally also what servomotors serial you using because i need to know if could use cheaper servos, idk if you will read this but in case you do please help me
@kylecampbellweb6 жыл бұрын
Hi, all my InMoov is PLA, not sure how much I used in the hand but maybe 1.5 reels for the hand and forearm. Use at least 50% infill for any gears but less for general parts. I used cheapish MG996R servos for the hand/fingers from Ebay. A few burnt out but you can buy in quantity packs. Printing the hand didn't take that long but setting it up took the time, I found the hands the hardest part of the whole InMoov to get working correctly. Heres a list of the parts I used ....myrobotnigel.blogspot.com/p/inmoov-bom.html
@srshivakumar74902 жыл бұрын
Way' not share
@CabrioDriving5 жыл бұрын
I knew it must be using some wire/line. Wouldn't it be better to use some stronger and flexible material?
@kylecampbellweb5 жыл бұрын
Hi, its fishing line. Its not ideal and is not the best design. There are other designs and Gael/InMoov creator has designed a much better hand that I think is used for charitable prosthetics, but he has not made the designs available. Have a look here ...inmoov.fr/inmoov-prosthetic-hand-almost-ready/
@jasonstokes54697 жыл бұрын
Thanks for the videos
@kylecampbellweb7 жыл бұрын
Thanks Jason
@unaidedjoker83983 жыл бұрын
Can you please answer me can I use servo motor mg90s Instead of tower pro mg996r
@kylecampbellweb3 жыл бұрын
Hello, any servo that is same size and will fit in the arm. I used cheaper ones but they burnt out often. The MG90 are too small and weak I would think.
@davisilvameireles30416 жыл бұрын
ei amigo Onde foi que você comprou esse robo ou tem o arquivo dele pra imprimir em 3d?
@kylecampbellweb6 жыл бұрын
Hi, the hand is designed by Gael Langevin and you can down load the STL files for printing here inmoov.fr/hand-and-forarm/ and also here inmoov.fr/inmoov-stl-parts-viewer/?bodyparts=Right-Hand