Inmotion V12 HT Unboxing - Better than my Inmotion V12 High Speed?

Finally, the Inmotion V12 HT (High Torque) is finally here.
⭕ EUC Discounts
🇺🇸 North America (eWheels):
---- shrsl.com/2j614
👽 Alien Rides: alienrides.com?sca_ref=921665.iBJYQferE4
🇬🇧 UNITED KINGDOM - 5% OFF
- e-rides.com/?r...
- CODE: madpack5
🇨🇦 Canada
- eevees.com/?re...
- CODE: MADpack
🇪🇺 EUROPE - 5% OFF
- myewheel.com/r...
Promo Code: MADpack
This is not the full review but the unboxing of the Inmotion V12 HT but next to my Inmotion V12 High Speed (HS) that I've been riding for the last 2 years. This is for me one of the most mature EUC (electric unicycles) available on the market and is definitely one of the funniest electric unicycles to ride in 2022. So if you are searching for one of the best PEVs in the market to help you out with your city mobility or even going off road have a look at this wheel because it is a critical wheel for us PEV riders. I'm not focusing on the specs of this wheel but on which differences we can find on the Inmotion V12 Ht compared to the older brother the Inmotion V12 HS (High speed).
Which one will be my favourite? Stay tuned for future videos. Also, we cover the cutout situation and this is the VS fight that I couldn't wait to bring to the channel. Since the V12 arrived is been taking the place of my inmotion V11.
*******************
⬇️ DISCOUNTS and MERCH ⬇️
*******************
👕 MADpack MERCH: madpack.creato...
**************
🛡️ Protective Gear - 10% OFF
- xionpg.com/ref/2/
- CODE: MPKX10
🧤 GLOVES - 10% OFF
flatland3d.com...
CODE: MADpack
----------🧥 Lazyrolling jacket or Pants - $20 OFF
lazyrolling.co...
CODE: MADpack
⭕ My Helmet:
link; www.ruroc.com/...
**************
🛹 ONSRA Skateboard 15% OFF or $50 OFF
🇪🇺 rideonsra.com/...
🇺🇸 www.onsracalif...
CODE: MADpack
*******************
📷 Insta360 + Selfie Stick - 5% OFF
- www.insta360.c...
*****************************
⬇️⬇️⬇️ CONTACT ME ⬇️⬇️⬇️
*****************************
For Business queries:
➡️ [e-mail]
🌈 Instagram: / madpack.reviews
*******************************************
*** ALL LINKS ARE AFFILIATE LINKS
#MADpack

[@18MRpsi]

Love it. Can't wait for the in-depth review! 👊

[@MADpack]

Is going to take a bit longer than normal because I had a flat tire

[@MADpack]

@@Miguel-ve1lh yikes what?

[@HighOnScience]

Bought my Hero 3 months ago, had it IP 67 when it comes to water resistance but sadly my Hero didn't handle rain at all. As I switched to the V12 this video really calmed my nerves. Thanks, sound like my kind of wheel, never owned a 16 though, only 18/19 inch ones for the past 10 years

[@MADpack]

You will love how fun is this wheel… the only thing that I recommend is to put a transparent layer of tape on top of the screen since it can get some moisture below the first layer

[@Hangin_With_Shane]

Marcos, Another great video! I'm looking forward to seeing an indepth review of the HT. Let's go V13...ha ha ha!

[@MADpack]

Thank you my friend always good to have you around :) thank you the constant support

[@Hangin_With_Shane]

@@MADpack always my friend!

[@MADpack]

Thank you so so much :)

[@icebreaka1969]

my v12 HT is going to be here this sunday, finally!!!

[@MADpack]

I’m happy for you but enjoy it ;)

[@Sock66]

Bro what was that BANGER you played?!?!

[@MADpack]

I don’t remember just look on KZbin for royal free music

[@TheDownloader86]

Hello, great to see you have your V12HT, looking forward to your review! I also ordered V12HT, do you know if there is any difference between your test unit and Batch 1?

[@MADpack]

Not aware of any changes at the minute

[@TheDownloader86]

@@MADpack BTW I just saw video from Cameron Massie and he put new gen.3 motherboard for V12HS and he says that acceleration and breaking is significantly better with new board. So have it on mind :).

[@MADpack]

Oh I will try out that definitely when I have the time to install the new one … the priority will be to change the tire on the HT

[@EdLrandom]

I already go 65kph with my new v12 HS without noticing sometimes so looks like ht is not for me. The rim should be re-enforced on both, kinda stupid they just have a weak rim on the hs. I really wish they would sell the rim separately from the motor actually.

[@MADpack]

I believe they want to reenforce the rim on the hs also I believe bro… and yeah the v12hs do easy 63kph after that we are just pushing the wheel and they wheel to an speed that starts to become dangerous… where are you based?

[@EdLrandom]

@@MADpack I'm in Ukraine. Why do you think going over 63kph is dangerous? Freespin is like 100kph on it. I feel pretty stable. Lol, I did bent and cracked my rim and I can't get a new one cause it's out of stock here, well the entire motor part is, might have to transplant my 16x rim to my v12 I love it so much now.

[@MADpack]

The thing is the v12 you can do 71kph without a cut off but I will not push I normally ride at 63kph max since if I catch a bump I still have some room before a possible cut off hope it makes sense

[@EdLrandom]

@@MADpack v12 tilts you back when going over 70 though, right?

[@MADpack]

I never ride my v12 above 67kph

[@Username-oj9rd]

1st fr0m Malaysiaaa.!! 🤟😎💥💥💥🔥🔥

[@MADpack]

Ahahahah pleased to see you in here :)

[@Param0nt]

Hi! Can you please measure and compare the width of both rims? Is this true that HT rim is wider? And if so then how big is the difference?

[@MADpack]

Is a hard one to say because for that you need to disassemble the 2 wheels but I will see what I can do

[@negraof]

Hello. I have had a 16x kingsong as a first wheel for 6 months. And I want to upgrade. I like the 16-inch wheels. I would like to buy a v12 hs or ht or a begode T4 or another unicycle that you would recommend as a second wheel. Thanks

[@MADpack]

I will never buy a begode is just pure garbage the built conduction I would buy Patton or wait a bit more for the v14 from InMotion

[@andresrampa3632]

Hey great vid! I´ve a kingsong 18xl and I'm very happy with it !but I want to change mine for one v12 ( hs or ht), do you think that it worth changing? thanks!

[@MADpack]

Depends on your needs and your thoughts on why you are thinking to swap it for a v12

[@Reawer]

I hope you won't have problems like Adam!

[@MADpack]

I just had a flat tire so not a lot of time riding it agahahah

[@PatFriedl]

So no cutouts yet? Have they fixed the problem then with mosfets and firmware?

[@MADpack]

I never had problems with them at least for now

[@Sock66]

Bad example, we all you know have MASSIVE hands ;p

[@MADpack]

Ahahahahah nahhhhh I’m only 1,69meters

[@BigBoss-gb4cx]

Hard to decide to wait for V13 - which is a lot more expensive and might have issues + heavier, or buy a V12 HS/ HT.....

[@MADpack]

InMotion is going to release 2 new suspension wheels smaller than the v13 if you want to wait even longer :)

[@BigBoss-gb4cx]

@@MADpack where does this info coming from? The v12 come out a year ago. I wouldn't want to wait 2 years for a wheel....

[@MADpack]

I have my info :) but InMotion is working on 2 new suspension wheels smaller and based on this more modular experience like you have on the v13

[@noelleonard2498]

Now we just need to see If there's any reliability to this batch

[@MADpack]

Soon more videos on the channel as you know. Thank you to come around

[@noelleonard2498]

@@MADpack but yours is still a pre production model.

[@MADpack]

Is a final product of the v12ht they are just adjusting software

[@MADpack]

@@noelleonard2498 no bro is a final product just adjusting software hardware nothing will change

[@kedahsedewa]

3rd, im from indonesian✌🏼

[@MADpack]

Ahahahah I can see a trend here who is fourth? Lol

[@digi_tv]

I cut out on my ht. Swapped it for the hs. The hs is noticeably lighter and faster. I'm not sure about the tire yet. Maybe i have to get used to it because the ht was easy asf to ride. The hs im scared to go over 25 when i could push the the ht and ride seated easier. I loved my ht and wish it had more speed. But it cut out twice. And thats a no no

[@MADpack]

You just have to get used to it the hs is much better but after 1000km you need to swap the tire is like butter but easy wheel and tire to go above 63kph

[@MADpack]

I can see that you send a message but I can’t read it

[@digi_tv]

@@MADpack after 2 days on the HS. I'm sore. It's scary to me can't get over 25 mph and I can't sit. I tried to at slow speed an crashed already. I could hug the HT and crouch it like a racehorse. I could ragdoll the HT. The HS is way different. I'm gonna put it in off-road mode like I had the ht. See if that makes Difference. I also only rode with my right pad on the HT and was able to corner really fast. I feel like I might need both on the HS. I go super slow cornering.

[@digi_tv]

@@MADpack I feel like I'm going to tip right or have to over compensate and crash.i could transition mid carve and grab the HT and sit and never worry about losing control sitting. Like it was an extension of my body. The HT Is soooooo easy to ride that if it's your 1st wheel it may not teach you how to really ride properly. I feel like I have bad habits the HT hid. The HS has sooo much more range. I barely lean on commuter and it's gone.

[@MADpack]

@digi_tv after you handle it the hs is the funniest wheel I ever try and super easy to reach 63-67kph but it takes time if you don’t like how nimble it is just put a wheel that have a more round profile and it will sort you out but put pads in both sides

[@Ice-bunny962]

Hi, just bought 12HT, but I do not understand, how it is possible to play music from Iphone on EUC speakers... If I put playing music on VLC on iphone, it does not play on EUC. If I use standard IP player, .. also no sound on EUC. So how is correct to connect (step-by-step) telephone to EUC to play music?

[@MADpack]

Turn on Bluetooth and connect to an option saying InMotion and that’s it

[@Ice-bunny962]

@@MADpack Ha! really its work. :) Thank You! I thought I should use "Inmotion" application for music, because there is some part of program for this with some playlist (as I see), but those doesn't work. Also as I was connected to EUC with standard app. first, there was not possible to connect telephone to EUC via bluetooth anymore, it was written, it is connected already ... and no sound... But now life is good again :)

[@MADpack]

Happy that you have it working bro

[@matf4505]

Enjoy the flat tires and cut outs. Be safe please

[@MADpack]

Enjoy the cut out?

[@noelleonard2498]

Gotta love how one preproduction ht wheel had a problem and all the sheepies jump on board. 😄 there's people that have thousands of trouble free miles on the old boards even.

[@MADpack]

Exactly is like my 16x came with a dead motherboard that when curving to the right the wheel was pointing the front of the pedal to the floor and curving to the left the front of the pedal was pointing the the sky. Is this a problem that all 16x had? No. Was it dangerous? Yes. When I made my review did I point this out? Yes. But did I generalised that all 16x had this issue? No…. Was a motherboard issue like I believe is the one from wrong way… I use it until I had a flat tire and was riding like a champ different sensation when riding (really different) but not that I felt anything wrong with my v12ht

[@Halphbaked210]

@@noelleonard2498 me.... 6700mi og board.... although just last night.. stopped responding to known good chargers

[@skiddysm]

I'm looking for my first wheel i need something that can handle bumpy dirt roads and big hills.

[@MADpack]

How much are you looking to spend?

[@skiddysm]

@@MADpack i just got the s22

[@MADpack]

Fun wheel but is going to bring you a good amount of issues with that suspension

[@yeahbuddy6852]

Your scale is fuckedUP bro...they weigh about 29-31 kg

[@MADpack]

Ahahah no is not. The situation is simple the weight is calculated with the feet of the scare since they are on the carpet you have less pressure on them… since that is true the objective of taking the weight was to see the difference not the right weight… like when we do with babes we weigh ourself first and after we add the babe… and the babe is the total - our inicial weight… here was to do HS - HT and the difference was 1.2kg more on the HT so the HT is 30.2KG

[@forstfodd]

4th, I'm on the North Pole 😊

[@MADpack]

That’s a new place that I never had on the comments let’s see where is the 5th lol

[@noelleonard2498]

That tire won't fit on the high speed easily, the width won't fit says ewheels.

[@MADpack]

Seriously where you got that info?

[@noelleonard2498]

@@MADpack my email from ewheels, something about the pedal hangers are different and would have to do some part swapping.

[@MADpack]

Did they told you what they have changed?

[@noelleonard2498]

@@MADpack pedal brackets are different on the ht for more clearance, I bet the ht motor is longer axle length. And the hs will not come with the reinforced rim, still the original rim. And they said the wheel they had inmotion put on the ht they are getting is the Chao Yang H666 Instead of a cst.

[@MADpack]

Thank you for your information I will have a closer look on that before I do my inicial thoughts bro

[@jensenperalta7927]

2nd from Philippines!😅

[@MADpack]

Ahahah thank you guys really thankful from you guys. Let’s see from where is the 3rd comment lol

[@BigBoss-gb4cx]

Great until you get a cut-out

[@MADpack]

Did you had one? I had just a flat tire :)

[@noelleonard2498]

One pre production had issues so far, we know nothing yet. Wait a week and we will see how these ht production wheels work out.

[@curtflirt2]

He will just like Adam and Chooch have had and the wheel isn't even fully out yet. Can you imagine how many Cutouts there will be when they fully release these!!

[@MADpack]

Yeah that’s the thing we just heard wrong way with that problem ride it before my flat tire and no issues like he has

[@MADpack]

You guys are really negative about the wheel. The truth is there are a lot of units around and even that made much more im than the one of Adam and no cut out hopefully. I feel that the motherboard on the one from wrongness is gone and he need a new one

[@curtflirt2]

Another Cut Out Wheel. Smh. They need to recall all of these

[@MADpack]

Hi my friend until now one unit had that issue.. what Adam have experience I didn’t hopefully

[@freeforester1717]

I guess you don’t keep up,with all the reports on the Electric Unicycle Forum then - there are all sorts of problems being reported with these wheels. Check it out.

[@MADpack]

Só who had more cut off on the ht? And no I don’t between having to make my videos been in multiple groups working 40h in hospital environment and having a family to look out no I don’t spend time in that forum

[@curtflirt2]

@@MADpack Chooch had that cut out too but he chose to lie afterwards and say that it was his fault that the wheel did that instead of sticking to the original statement which was wrong on his part. He has good content but he's too caught up in not making the companies upset enough to where they'll cancel his sponsorship and that's not authentic. Him and Adam both experienced cutouts. As a matter of fact, Adam tried to change up his story to until he had his second cutout and couldn't hide it. I like Adam, he's more authentic than most riders but I don't like how he tried to change his story. With two top influencers getting hurt on their wheels already, this wheel is a no no for me. As a matter of fact if Adam didn't come out with his first video, I would have placed an order for the V12 Ht, he stopped me, thank goodness

[@curtflirt2]

The problem with Inmotion is that they don't know how to deal with the higher Voltages, they are having big issues with that, they need new Engineers. They seem to be okay with the 84Volt wheels but not the 100. Unless they change their team, I would never buy a 100 volt wheel from them.