Advanced Fixtures in SolidWorks Simulation

[@MetalAnimeGames]

Make a video showing what kind of fixtures to use in the software in order to emulate the best possible way real time conditions...for example bolts, weldments, pins, screws... on differnet real life examples...if it is a tight fit, loose fit etc...

[@ideafaucet5710]

Why not use FOUNDATION BOLT here? Does that not create the same level of advanced loading (axial, bolt head dia.) without the extra steps?

[@ManuGaldeanoRuiz]

If you want to see all the stress tensions on the bolt, how would you do it?

[@MultiFd3]

Hi!, do you know how i can simulate a flat surface touching a circular face? i am having troubles trying to simulate that. If you have a video or information, tell me

[@Skurvagis]

is there any video showing the error because of wrong dimensions? I want to check if there are any obstacles due to wrong dimensions.

[@JavierD]

How to add the pre-load torque in the bolt with this config?

[@deynerazanedo9566]

+jv071 in the bolts options u can add pre load only need move in the left menu

[@JavierD]

+Deyner azañedo but with this method one is not using the bolts options...

[@seankernel]

I think combination of virtual wall with foundation bolt will solve your problem. The pre-load torque can be set in the setting of foundation bolt.

[@erwe32]

How do you make a split region around a hole on setting a reference geometry fixture? it starts at 5:37

[@phitsf5475]

Create a sketch on the face and create a "Split line" feature.

[@KundathSathish]

Good illustration Thanks