INSANE BODY ARMOR + OVERLINE FENDERS + ROCK RAILS on our JEEP Wrangler - FULL DIY, (Episode 1/3)

This weeks episode is INSANE! We install Metalcloak goodies including the full corner guard system, the 4 inch fenders, and the heavy duty rock sliders on our 2006 Jeep wrangler TJ Unlimited (LJ). This will be a 3 episode series, and we are extremely excited to share the progress of this build with you all.,
Link to all of the Metalcloak products in this video:
metalcloak.com...
metalcloak.com...
metalcloak.com...
Link to all other products used in this video - www.amazon.com...
Check out our Linktree! Has all our coupons / Favorite products in one! linktr.ee/gc_g...
Instagram - / garagecouple
GarageCouple Facebook - / garagecouple
Www.Garagecoupl...
Disclosure: We get commissions for purchases made through links in this post.
This video is only for entertainment purposes. If you rely on the information portrayed in this video, you assume the responsibility for the results. Garage Couple LLC
#garagecouple #jeep #jeeptj #LJbuild

[@richsmith3120]

Your C clamp is a plumbers copper pipe cutter. You place it on the pipe and spin it while tightening at the same time. 😆

[@Garagecouple]

That's very cool!

[@shanesmith-n7l]

Your special clamp is indeed a pipe/tubing cutter, it is mainly used for brake lines for cars.

[@Garagecouple]

So interesting! Email us for some free GC Merch! 🍺

[@brayanreyes5993]

I suggest that before installing the body armor and tightened the screws in place , to add a bead of silicone at the top so water doesn’t get behind the armor and starts rusting out the body on the jeep .

[@Garagecouple]

Nice tip!

[@justacarfan]

At least some double sided good quality tape to work as a seal.

[@apexpredator_jku]

Can't go wrong with MC. Build quality speaks for itself. Made In The USA & the world would be a better place if everyone had the level of customer service that MC does...and that's coming from a Rock Krawler guy. Their diehard customers are tribal and loyal to a fault. Loving the direction y'all are taking with this build. Only "problem" is once you've gotten a taste of the good stuff there's no settling for less. As for the Raptor lining. I know 4 cans wasn't enough unless you settled for 1 coat which I don't recommend plus you should've most definitely laid down a coat of their etching primer first. You're going to have issues with that in the future. Ask me how I know.

[@Garagecouple]

We put down 2 coats over 24 hours. Let's see how it holds up!

[@cowpounder57]

That "clamp" is a copper pipe cutter used by plumbers. Gently clamp it on a small piece of copper pipe & tighten it while rotating it around the pipe until cut through. Wirks great. I have several for cutting both copper & steel pipes.

[@Garagecouple]

Very cool! Thank you!

[@michaeljuarez2961]

That C clamp is a tree stump grinder for tomatoe trees 😅 Love your videos

[@Garagecouple]

Laughed out loud! Thanks for that

[@robertreyes7782]

The unknown clamp is a pipe cutter to cut copper plumbing pipes

[@Garagecouple]

Oh coool!

[@keithalfonso2349]

That C-clamp that you were asking about is a plumbers tool. It clamps around copper pipe and you turn / twist it until you cut through the copper pipe.

[@Garagecouple]

Super cool thamk you!

[@freebird4286]

It’s a tubing cutter for copper pipe. Jeeps are looking amazing!

[@Garagecouple]

Thanks for the info!

[@randyjones7001]

That "C Clamp" is a plumbers tubing cutter.

[@Garagecouple]

Cool! Thank you!

[@johnd6776]

It’s a piper cutter for copper pipes,plumbing. Clamp down rotate around pipe the tighten down again and repeat until pipe is cut

[@Garagecouple]

Awesome

[@ezenteno77]

Can’t wait for the next episode. Looking great so far.

[@Garagecouple]

Thank you for the support

[@doughaven-rf8id]

Never used a tube cutter as a C clamp before but if it works use it. lol I like your attitude "We're doing it our way" ... that's all that matters. Carry on.

[@richsmith3120]

Hello from Spokane WA.

[@Garagecouple]

Hello!

[@jeepinwithjulia]

I love all of MetalCloak. My 2015 JKU has lots of it!

[@Garagecouple]

We love it too!!!

[@m13monroy]

thanks for video is a lot of help . The LJ will look Amazing beautiful project guys 😎 you selected great parts in build.

[@Garagecouple]

Thank you!!!

[@gman9945]

Saw Aleen's game show debuit the other night on Press Your Luck!

[@Garagecouple]

Sweeet!

[@joescott803]

It’s easier to get the flares off if you cut them in half long ways. The plastic bolts wrecked my fingers so using pliers is a must unless you just grind em. I really like trifold rivets on new flat flares too. It’s solid. I got a metal set from eBay for 100$ shipped. Yitamotor was the brand

[@Garagecouple]

Nice! Thank you!

[@danmiddleton3246]

Love you channel thanks

[@Garagecouple]

Thanks for watching!

[@420guyin605]

As much as i likes watching this its amateur hour with those tools but luckily the girl was there to clean

[@Garagecouple]

Thanj you for your attention!

[@danmiddleton3246]

It’s a pipe cutter 😊

[@Garagecouple]

Thank you!

[@dougphillips8389]

Your oddball clamp is used for pipe cutting..

[@Garagecouple]

Thank you!

[@jedstrait1368]

That "clamp" looks to be a pipe cutter.

[@Garagecouple]

Inherited from Greg's dad!

[@jedstrait1368]

@Garagecouple love the vidoes...wish you would have time to get all the Metalcloak videos up...before their big sale this weekend! I want to pull the trigger on their fenders and rocksliders.

[@bryansaints4989]

That is what i Did tapped it off and painted also did tub

[@Garagecouple]

Sickkkk!

[@CorruptedYouth]

Genuinely jealous bro, your wife is Soo fine 🔥🙏🏽 love your videos guys

[@dwizl7213]

Hate to break the news but If you didn't sand down those corner guards or spray some etching primer that Raptor lining is going peel off and 1 layer isn't going to suffice. FYI, you linked the wrong armor. You linked the Steel ones instead of aluminum.

[@Garagecouple]

We put 2 coats down. Guess we'll find out. We can always remove and redo, went on very easily!

[@rickharrison8522]

C clamp is a pipe cutter.

[@Garagecouple]

Thanks!

[@bryansaints4989]

If I did it over again I would have used rivet nuts

[@MrJohnashley]

It is for cutting pipes

[@Garagecouple]

Thank you!

[@barrymccochiner9900]

Its a Tubing cutter

[@Garagecouple]

Thank you!

[@jasontaylor9871]

I think you should have the fenders and rock rails powder coated or painted The LJ is a nice Jeep why ruin it with multi colors

[@Garagecouple]

It actually looks ammmmazing. Stay tuned for the final episode!

[@scottchisholm2032]

Tubing cutter not a clamp

[@Garagecouple]

Very cool!

[@desviooffroad5876]

Not a C Clamp 😲 That's a Pipe Cutter for plumbing 🥴

[@Garagecouple]

Coool

[@georgealeong8188]

I always feel entertained when i watch your channel love you guys

[@Garagecouple]

Thank you so much!!

[@maxmoore4315]

LOL Pipe cutter copper or aluminum. Now you know.

[@Garagecouple]

Thank you!

[@EMIMICA_YT]

:D

[@Garagecouple]

❤️

[@jasonoakley8788]

that's a pipe cutter, bud.

[@Garagecouple]

Thanks!

[@mudmaster99]

Not a clamp! It's a tubing cutter

[@Garagecouple]

Thank you!!

[@thatonedude926]

Because of you guys, i bought a set of Rocktrix, did the black classic seven spoke. I love them. Running 35x12.5 baja boss ATs on the rocktrix 17x9 with the negative twelve offset...i couldnt be happier

[@Garagecouple]

Love

[@thatonedude926]

​@@Garagecouple just realized I commented on the wrong video 😂

[@thatonedude926]

​@@Garagecoupleit was for your white Jeep with the roktrix