INSANE Spray Paint and Alcohol Trick

🔥NEW Portable Airbrush System SOLD OUT! Thank you to everyone who ordered!
PreOrder NOW and don't miss out on my next batch of custom airbrushes: duncancustomairbrush.com/prod...
You can make some INSANE spray painting effects by simply by applying rubbing alcohol to wet spray paint, even on something functional like a table top in this video! Check it out and share the love!
I hope this video blesses your day and sparks creativity in you!
🔥DISCOUNT LINKS and CODES:
▪️▪️▪️▪️▪️▪️▪️▪️▪️▪️▪️▪️▪️▪️▪️▪️▪️▪️
💦 The Glitter Guy: **Use code DUNCAN
www.theglitterguy.com/?ref=3-...
💦My Amazon Store
www.amazon.com/shop/duncancus...
💦 Join Creative Fabrica for ONLY $1!
www.creativefabrica.com/promo...
💦 Alumilite Epoxy Discount: Duncan10
www.alumilite.com/?oid=3&affi...
💦 Black Bear Alcohol Inks Discount: DUNCAN
www.blackbearglitters.com/col...
💦 Chalkola Art Supplies Discount: Duncan10
www.chalkola.com/?rfsn=487713...
Get Social With ME!
▪️▪️▪️▪️▪️▪️▪️▪️
📷 Instagram - / duncancustomairbrush
⏰ Tiktok - / duncancustomairbrush
📘 Facebook - / duncancustomairbrush
📌 Pinterest - / duncan_custom_airbrush
*By using my Affiliate links - it is no extra cost to you, but it gives me a small commission to help support my channel 😉👍 THANKS!
#art #diy #spraypaint

[@bradbair1405]

If you do spray paint before alcohol you get more round cells. If you alcohol then spray paint you get a spider web effect.

[@SharonCreamer671956]

Being the daughter of a hardware store owner, I would like to make a suggestion. Always stand up while spraying. If you are sitting, you breath in more of the fumes. Which you won't do if you are standing up. Also, if you are standing up, you can spray with your arm fully extended and, again, not breath in as much of the fumes, which you cannot do while you are sitting. Also, if you are standing, you can step away any time you want to get a breath of fresh air. Otherwise, keep up the good work.

[@kennethbutzer4467]

Well I am not related to anyone who works in a hardware store but I have worked with many mediums over the years as an artist and as far as acrylic sprays go the only advice I can think of is..RESPIRATOR!! Standing,sitting especially inside makes absolutely no difference,it’s all toxic to your liver and lungs, so saying stand up so it’s not as bad is irresponsible.

[@SharonCreamer671956]

@@kennethbutzer4467 Compared to what he was doing -- it is not.

[@erincrawford4751]

He set the table on fire, and you're focused on the small amount of fumes he may be exposed to 😂😂

[@SharonCreamer671956]

@@erincrawford4751 That was a stupid thing to do. I think he learned a lesson from that. Or, perhaps, he was trying to teach a lesson.

[@karenmusa3052]

Thanku, I appreciate your concern, seems others don't and just wanna put others opinion down..😔

[@bbarker5766]

I've custom painted motorcycles and many other things for over 30 years and I've used similar techniques to get all kinds of different effects with paint. I've done several that look like acid was splashed on the parts and ate through multiple layers of paint. It's awesome to work with stuff like this.

[@DuncanCustomAirbrush]

Sweet! That is basically what I am doing in many of my vids: showing new people the old techniques, so it is new and mind-blowing to them. Let me know if you think of any more techniques I could try out and make a video on👍

[@mysticdawn82]

Curious how you got the acid effects going

[@pattynewcomb4213]

That would make a beautiful moon if you use a circle stencil

[@DuncanCustomAirbrush]

Oh yeahhh you're right!

[@driverjamescopeland]

TIP: When try to emulate rock veins, use feathers. It lends a ton of depth, and allows you to get either the ribbon effect or the more jagged/fractured look, depending on how you use them.

[@christycase2324]

Just use a good long feather as not one of the loose downy type or it will drag

[@AquaLady153]

nice!

[@CraftescapeTX]

Yes, please to both a river table and a galaxy painting! Those street artists are so amazing and with all your techniques and experimenting, I can't even imagine what you could create! The table is stunning!

[@DuncanCustomAirbrush]

Will do!!

[@davefletch3063]

How about a galaxy river table…the combination would be awesome

[@ebre3080]

Now that is a beautiful slab of dark marble. I think i will try this on my gardentable, thanks for the idea.

[@teslakennedy503]

Love how you're just being yourself instead of giving the typical tutorial vibes!! Awesome work , cool ideas, and very entertaining 😂😂😂

[@brendamozzy]

Me too!

[@themysticmuse]

Yeah, very well done.👍

[@AnitaEriksen-zb9fr]

Metallics would look amazing especially pinks and purple teal!!❤

[@DuncanCustomAirbrush]

YESS!!

[@kaoscreations865]

This is incredible! I'm so glad the algorithm worked for me to see this! I love experimental works, even when they don't turn out. It's a learning experience. This gave me an idea for a small table I'm putting together. So super excited now! Thank you!

[@DuncanCustomAirbrush]

That's awesome to hear and thank you! I would love to see how your table turns out!

[@kaoscreations865]

@DuncanCustomAirbrush I don't have my own channel, but I will do what I can when it's done.

[@lindanicodemus9306]

Love it!! You can also add some different colored mica’s to your alcohol spray. It makes a cool effect too!! I’ve used a white pearl mica alcohol spray over marbled epoxy and it came out super cool!! Thank you for the video!!

[@dawnholmes-hedgehog6177]

Your video was so refreshing to watch and made me laugh on such a dright winter's day. I agree, the hardest part is knowing when to stop and let the artwork do its own thing. That is a stunning table and whoever buys it can be proud to own such an original artwork. I have subscribed as I need to laugh more, and as a mixed media 'artist' myself, it is a joy to learn. Thank You.

[@DuncanCustomAirbrush]

Awesome, Glad you enjoyed it, and thanks for the uplifting comment!

[@abalzeris831]

Would love to see a river table!

[@oclmw714]

Omg crazy beautiful...I love it!! ❤ It's definitely giving space vibes!! I'm going to have to try this for sure! 🙌🏼

[@DuncanCustomAirbrush]

Awesome! I would love to see it when you do!

[@bellescreativecraftdesigns1132]

I would love to see how you do a river table!!! 🩵💙🩵🔥🩵💙🩵

[@KensToyz]

Thank you. Not only for teaching me something new, but also for the entertaining video.

[@DuncanCustomAirbrush]

Thanks!Glad you enjoyed it!

[@sherylmccloud385]

Love it. I was thinking "space" and you took the words right out of my mouth. I was thinking a sea sponge dabbing would also add depth. Great video.

[@DuncanCustomAirbrush]

ooh nice idea! I want to do one of those street art planet paintings!

[@Wrecktapus]

I got the feeling of the surface of an alien planet with meteor craters and earthquake damage.

[@joycepugh5347]

thanks for another awesome share - yes PLEASE do both techniques so we can see how you do them - Have a great weekend

[@DuncanCustomAirbrush]

Thanks & have a blessed week!😉👍

[@leeoCraftylady]

I sure do love watching you have fun 🙂and the great ideas are nice too! Thank you!

[@DuncanCustomAirbrush]

Thanks so much! 😊

[@michaelfacey1909]

Your humor is the topping on your instructions. I love the technique. Flow as you Go 😂😂

[@DuncanCustomAirbrush]

Thanks so much & Glad you enjoyed it!

[@cobaltbluearts]

Love your work man, I'm doing quite a lot of the same and it's such a fun way to paint!

[@GarethVaughan-my1fw]

Stunning marble galaxy you've created there, and really enjoyed your enthusiasm! So, I walk into a shop asking for a liquid that's almost pure alcohol... can picture the cashier looking down at me already, ha ! Thanks for tips, you're a good teacher !

[@anniekempton9193]

Pretty cool dude! 👍 Thanks for sharing this

[@bless5xs283]

Love this!!! It looks like my in-laws granite bar top. We always call it the moon bar in the basement. I would love to see river table made. I’ve been wanting to do that with an old table we have just haven’t gotten the nerve yet. 😂 THANK YOU! You always make it fun and easy to understand. 😊

[@DuncanCustomAirbrush]

Thank you so much, a counter or bar top would be sweet to do!

[@yalhsaheath]

To create a foggy whimsical seen light your lighter then spray with DIFFORENT colors.... Yes spray paint into the flame carefully. I loved this video thanks

[@lilaflohr602]

You should try and add a bit of mica powder in the alcohol too. Amazing!! ❤

[@carriesmith3421]

That’s EXACTLY WHAT I WANTED! You are so excited. YES to outer space. That’s what I am working on right now. Need some inspiration. Thanks

[@bonnienapier8459]

❤I just love it, I have a large octagon coffee table that I've been hesitant to restore, but it really needs an update. You have inspired me ❤

[@shastina5493]

It was refreshing to watch you create as you do! I had to laugh because some of your phrases I use too! Nice to see a creator doing what he loves having fun fun doing it too! 💯

[@DuncanCustomAirbrush]

Thank you!

[@fyahssab]

This is super cool. I love how it looks. Creative.

[@billyshay7207]

You did a Corvette Summer pun, bless you sir 🙏 😁. I love that movie. Don't know the age demographic of people who watch your videos but, as soon as you said that line, I started laughing. It's truly an underrated gem of a movie.

[@DuncanCustomAirbrush]

Ahhh I knew someone would get my humor, lol!!🤣

[@cecileroy557]

I love it & it was sooo much fun to watch you create it!!

[@PapaLyser]

Also don't forget to try thin layers of silicone, use flame to get rid of the grease, creates interesting patterns also.

[@tillross4078]

Ya the Galaxy i have seen that done ,, turns out nice ,, Thanks for the video was cool 👍

[@AnitaEriksen-zb9fr]

Metallics would look awesome!!

[@matthewmickles1997]

Looks like cool craters for moon painting too

[@firepr00f77]

Nailed it

[@sherylldupuis6323]

Great experiment. Table looks amazing. Love it. Awesome channel. Thank you 🤗🥰

[@DuncanCustomAirbrush]

Thank you so much 🤗

[@chrisdye5916]

I thought about that to after seeing you finished it i would like see the next one really enjoy watching your videos

[@DuncanCustomAirbrush]

Thank you!

[@princessmustafa3848]

Did I get lost for 3 hours learning new paint treatments? Yes, yes I did and writing down all future projects! Thank you!!😊

[@Phil4013]

Duuuuuuuuuude one thing I learned (besides the many) it doesn’t matter if you use fresh paint on WET epoxy! 🤯

[@user-tc4ds8tg3x]

Love to see how you do a river table!

[@richardemele7056]

Awesome! Luv it! Ventilation ventilation ventilation!

[@sandysacrylicart6925]

You are hilarious.... love how this table turned out. This is the first video of yours I have watched. I'm hooked, will have to check them all out!!

[@michaelbrown6032]

Wow! Looks amazing!

[@ne1canbgr8]

1. Respirator or ☠️ especially with rusto paint. 2. For this application, use store brand Blk, Wht, Grey etc. Metallics can be the $ investment. 3. Specific paint for furniture available. 4. Epoxy finish. 5. Doing the legs as well significantly ups value of project *unless retaining character of legs) 6. Use Killz as base. Been at this since 90s. Perhaps I put some vids out lol. Good work. Happy painting....

[@DuncanCustomAirbrush]

Great tips

[@mikeshanermusic]

I might try this on a guitar. TY dude!!

[@NBC_NCO]

Creative people smell a lot of paint. This is where creative genius comes from. Very cool. I like it.

[@SaVaGe-187]

Yes River table plz

[@brandibishop2246]

I recently found your channel and just wanted to say you are my new favorite to watch. You have cool ideas and not gonna lie you're freaking hilarious😂

[@DuncanCustomAirbrush]

LOL, Welcome aboard and thanks!!!

[@monica2375great]

Just found you! This was the 1st time I laughed, had fun and actually learned something really amazing! I've had a learning disability my entire life so it's hard to retain information. Make it fun, make me laugh and I am tuned-in! I subscribed! TY

[@hughtempleton8640]

I absolutely love the table top . ❤

[@taffyseaman3053]

I haven't been watching your videos because I've been sick but now feeling better so thank you for the video. I love it❤

[@DuncanCustomAirbrush]

Welcome back and glad you're feeling better!🙏

[@myrahunter131]

This would look so amazing with the legs painted black or silver, or both!!

[@Altitude_Tumblers]

Thanks for the idea Taylor, that turned out great!

[@DuncanCustomAirbrush]

Hey sorry I just missed joining the Premiere this morning - I have the flu🤒

[@Altitude_Tumblers]

So sorry to hear that, feel better soon !!

[@tankiescraftingmom4381]

Your fun to watch and I learned something new

[@DuncanCustomAirbrush]

Awesome thanks!

[@reginacarpenter-brooks2266]

Beautiful ❤

[@OnlyJalonPhd]

I’ve been searching for a technique like this, for my glass vases!!! 😊

[@DuncanCustomAirbrush]

I actually have a video where I did a glass vase: kzbin.info/www/bejne/anjCk6h-iN9plbs

[@OnlyJalonPhd]

@@DuncanCustomAirbrush thanks! I’m checking it out right now.

[@trishgage9288]

Looks like the moon's surface. Very inspirational for a space themed room

[@APOKreations_with_Kristin]

Wow!! It looks like the surface of the moon 😮

[@DuncanCustomAirbrush]

ABSOLUTELY!!🌙

[@lindacravens1359]

Oh wow .... sure wish this could be done on a vertical surface (like a fireplace) ...... thank you.

[@judigurl]

You couldn't be boring of you tried lol... Ur hilarious and u brighten my day.. Thank you😊

[@cf14th]

Dude your a trip😂 cool project I will have to watch more of your vids

[@preciouspeaces]

TFS another great video💪🏾

[@AngelaJsaca]

Awesome 🤩

[@user-pq3ef7eu9l]

😂 this is why I love watching, you are so funny and of course you're very talented. I can't stand the videos where people are just not talking and when they do it so low monotone very very slow motion lol so thanks for the laughs...oh yeah and great sound effects 😅

[@DuncanCustomAirbrush]

LOL you're speaking right to my heart!

[@aaabeverages7152]

Sat and watched till midnight. Trippy paint job.

[@DuncanCustomAirbrush]

Wow thanks!

[@dzzspotreptariumeducationa6340]

Omgoodness 😂 my husband has been watching you for awhile. I'm so glad he told me about your channel.

[@BrandyAnnDesign]

River table. But maybe red/ lava flow? Instead of blue? ❤

[@timekeepsonslipn]

Try Dawn dish soap with water in a spray bottle light mist, if you haven't already . You'll probably like it too 😀 . Love how you're just winging it. Love to hear you talk it all out and the "who cares" lol

[@DuncanCustomAirbrush]

Great idea!!

[@tgman1054]

You must love mustard to have a picture of it but I love your video it is awesome

[@barbridingsTheResinator]

Table came out amazing. I would love to see you make a river table. I want to do one too but I'm scared ..LOL

[@DuncanCustomAirbrush]

lol mee too but we just gotta go for it!!

[@mjohn4874]

I am an owner operator of EpoxieTops Resin Design. Try mixing mica powder into your isopropyl. same as your water drops but evaporate quick and metallic finish.

[@DuncanCustomAirbrush]

Thanks for the tip!

[@cindyherbold2384]

❤ that table turned out great! I like your sense of humor 😊

[@DuncanCustomAirbrush]

Thanks so much! 😊

[@lorineeland7677]

I want to see you make a river table

[@Heidi-Beth]

Love that!

[@katspeace5550]

Just like magic 🎶 Reminds me of the moon from the camera angle 😍🤘🏼

[@suzannehurst4805]

Love this! Definitely trying this. Did you seal it and if so with what? Thanks for all your great videos!!!!

[@DuncanCustomAirbrush]

Thanks! Just another layer of epoxy and done

[@atoiler1389]

Hello and thank you very much for posting your video(s). I find them very helpful. I am hoping you could help me with a couple of questions. I have a smaller antique safe that was my grandfathers. The paint is badly worn off. I will be sanding the entire safe and I plan on repainting it and adding a bit of art. I have NEVER used an airbrush! I would appreciate any suggestions for the following: 1) what BLACK colored paint product to spray the entire safe with once it is sanded to bare steel? 2) what paint product to use in my air sprayer? 3) what paint product to spray over the entire safe, in order to give it a clear coat as protection for the black paint and the artwork? Thank you very much in advance, it is appreciated!

[@DuncanCustomAirbrush]

Here is how I like to paint starting from bare steel: kzbin.info/www/bejne/f3-piJ2wrL2BeMk Then you base coat, I usually like using Rustoleum 2x matte (black or white). And after artwork, I would have my buddy spray automotive clear coat on it for ultimate protection and durability.

[@shellshock2209]

Dude you're just like me. Just wing it. Fun to watch

[@tyb5425]

This guy is amazing! And he can Sing,rap,dance in just 1 Show…

[@DuncanCustomAirbrush]

lol! I'll have to go back and watch for the rappping and dancing part

[@DuncanCustomAirbrush]

Ooohh I know who dis now!! LOL My dawg!!

[@ZippedUpKitz]

That table top came out awesome…. Now you need to refinish the rest of it to make it cohesive!!!! It’s absolutely gorgeous!….

[@kelpiecoco7570]

I love experiments!! Here's one for you to try (if you haven't already) Mix you up some resin, any color but lots of super sparkly glitter looks fantastic in this technique. You can even use more than one color of resin cuz you're gonna let that dry completely. Then the next day take your cured resin piece outside and place it on a tarp or piece of plastic, or just put it on the ground if you want. Spray your pieces with Dawn powerwash (not too much) or just take some regular dish soap and drizzle it onto the resin pieces. THEN, grab your spray paint in a complimentary or contrasting color and spray it onto the resin pieces with the dish soap. You want to do this part fairly quickly. As soon as you spray it with spray paint, immediately pour a bucket of water over it or use the hose and rinse it off. Wherever the dish soap is, the paint won't stick and it creates some fantastic patterns. If you use the power wash you'll get a more speckled look and if you just drizzle regular dish soap you'll get some nice random irregular line patterns. Then your resin colors (and glitter) will show through the open spaces.

[@DuncanCustomAirbrush]

Ah thanks that's awesome, I have done both of those before and I have videos on my channel of it - you should check them out, you would love them!

[@ArtByCary]

Yes,do the river table.

[@stephaniek5435]

Lol love this guy!! 😄 just subscribed to your channel✅

[@brendaplunkett8659]

Please make a river table. One on my friends embedded fiber optics in the resin to look like stars in the night sky. Rob from Law and Lumber on youtube made it.

[@marknaayers5405]

Hi! Would this work on canvas?? I love it ❤️

[@druidldn1326]

Would be great if you had a second camera from above that you can cut to of you working on the painting. Looks dope btw

[@DuncanCustomAirbrush]

Yeah that would be cool - hopefully one day I will

[@ronjon5386]

I think it would look great with some transparent candy blue over the top. Or any color you like.

[@DuncanCustomAirbrush]

I agree!

[@sherricasarez9225]

Brand new to your channel. You're very entertaining. Thanks for sharing your art

[@Wrecktapus]

I'm just getting into painting warhammer miniatures. The techniques that I've seen you demonstrate are really cool, and I'm hoping to use them on a much smaller scale on my minis. Thank bud!

[@DuncanCustomAirbrush]

textures and fx tricks are awesome for stuff like that!

[@Brianbeesandbikes]

Your personality hit me like a happy puppy exploring n loving life!! Painting ideas were cool too.

[@justinmorgan8215]

Fire, a litlte mist, and laser beams 😂 That was fun, thanks for the inspiration, I'm gonna go and create something. Cheers.

[@leahstenbro4593]

Use grey primer and paint black. When the paint cracks it will look metallic

[@KimberlyLetsGo]

OOooohhhhhh! That was cool!!! It looks almost like a moon. Maybe another planet's moon? Good job!!!

[@nedcramdon1306]

This is wwaay better than those pour videos. This is more like real art.

[@81nannin]

😂 you are so funny! Pulled me in by listening by accident, it played on its own as I was looking for something else. I couldn't help but laugh and make my way to tell ya 😂 pooksie?! Lol Great Job!

[@rhondamcginn35]

That is kinda awesome

[@chuckvanvleet1268]

If you lay gloss down then spray over it with a florescent on a humid day it kinda does the same thing

[@lisacharlton1813]

Love this channel!!!!

[@DuncanCustomAirbrush]

Glad you enjoy it and thank you!!

[@NTSRFR4]

You can create a marble effect by using spray adhesive and spraying a piece of glass and then spraying colors like black and green or whatever colors that you want, kind of at an angle, like a hit and miss kind of pattern. Then flip the glass over. If it's on wood or something, you would need to seal it all in with epoxy or something.

[@DuncanCustomAirbrush]

hmmm, I am trying to picture what you are describing. Sounds very interesting but the spray adhesive is throwing me off. Can you message me on Instagram?

[@NTSRFR4]

@@DuncanCustomAirbrush Use something like 3M spray adhesive and spray it in "strings" across the substrate. They will look like veins like you see in marble.

[@beaumorris5289]

This is Great... It gives my Great ideas.

[@DuncanCustomAirbrush]

Awesome!