Insane steering lock & Haltech for the 1000+hp Turbo Mustang - Part 13

[@Matty.Hill_87]

Whoever you are that hooked Jay up you're an absolute legend

[@FDFraceshop]

Glad you like the kit. cheers

[@jameswhite7333]

"Hopefully this doesnt become Gaz's problem and we can just buy a front wing to bolt on" - I think I can hear an audible face palm from Gaz all the way over here in Australia 🤣🤣🤣

[@camd3041]

Frasers just giving us a little taster of what the in car footage will look like 😂

[@martinrodger9565]

Went Haltech earlier this year in the UK. Luke from Haltech UK has been very helpful on any queries I've had. Really good to deal with, straight talking and the product has been very reliable. Use the "Haltech Tuning and Tips" Facebook page for general queries as the group is large, tons of LS owners and very helpful.

[@mrmoss149]

Gonna have to change his online name to " JayDIDgetthis". Well done, lad. Well done. Many wishes to the chap who supplied the gift. I tip my hat.

[@benbanks6880]

Keep it coming Jay.....love your content.

[@pinderwagen]

What a gesture from `The Viewer` and fair play to FabCo for the discount. I`m 100% with you jay. a `plug and play` loom should be just that. Even more disappointing is the Prop. Craig has done loads of these, amazed there was such an obvious communication breakdown somewhere with Dave Mac. At 17:25, you can see a dent in it too..

[@southney7211]

What he said ^ The ups and downs of projects! Cheers for the update, keep it coming!

[@craigtaylor5075]

It does fit , they did donut to long but the rear seal has a long rubber skirt on it and now it’s in the cups at the rear it’s ok 👍👍, I even hand delivered it and marked it out but mistakes happen , lucky this one is ok just . They would sort it no problem if not great guys at Dave mac 👍👍

[@JayDontGotThis]

@@craigtaylor5075 with a hammer

[@craigtaylor5075]

@@JayDontGotThis having to tap it into your CHEAP rear yoke is not a length thing , 🤣🤣

[@Thermosmcjug]

I've never been excited about a Mustang before. I don't know whether to pray for Jay or the pedestrians.

[@quest8795]

Both!

[@mrmoss149]

Craig " I think that lock means you can get spectators on each side" 😆😆😆😆

[@ChrisOnevia]

Happy to see you running our stuff !

[@ScottPC]

I’m going to guess that Jay brought the steering kit and just didn’t want his wife to know. We’ve all been there.

[@Jamesashleycoyle]

😂

[@JayDontGotThis]

Ahhhhh sshhhhhhhh

[@LoupozE30]

Jay look into CANChecked MFD28. Its a small'ish display that can display all data from haltech sent over CAN

[@frankiewalnuts]

Nice mate, haltech is the way to go, much better system and scaleable over the years to come

[@mrmoss149]

Jay- you are truly blessed.

[@Pat613]

"you're ruining your road car" Truer words never spoken.

[@jamesbg]

Me without a project car watching Driftworks and Mighty Car Mods: "I need a project car so I too can have a Haltech ECU".

[@TomChame]

Very neat stuff in the gift box. Good for you Jay!

[@GetUpFalcon]

Thats mishap with the tailshaft is the sorta thing that drives me insane! I have absolutely no doubt that at the crucial moment of communication there was "yeah yeah yeah no worries mate" from someone.

[@mrmoss149]

That differential cover allows adjustable pressure to bearing caps to avoid deflection when" launching with the beans".

[@marklewis5460]

Brilliant. Nice to see some Haltech on there. Mighty Car Mods love them and they look nice kit, that loom excepted.

[@samoolol]

Haltech gaugeart can gauge could work for you. Theyre mint with scrollable screens and warnings etc

[@ahmed91750]

11:48 I think some of those wires need to be routed underneath the intake manifold

[@kc550]

lol I'm sure Jay plans on addressing that, these guys aren't scrubs.

[@ahmed91750]

@@kc550 he was having troubles routing that part of the wiring harness and he was taking about bringing someone to help him figure it out

[@Cloverleaf7642]

Lovely stuff. Looking forward to hearing that baby running in the next video.

[@mrmoss149]

" We just watched you do 20 mins of brake lines on the Corrolla- we can watch this". LMAO. Brilliant.

[@AlistairClark]

This is what happy looks like.

[@TurismoVZ]

cheap screen option is haltech $50 can to oobd2 cable with Bluetooth or WiFi connector to a tablet, dont need to spend a $1000 on a screen

[@JayDontGotThis]

Thanks I’ll look into it. I tried an app called real dash a while ago but it had a second or so delay with what was going on. On the RPM it was hurting my brain.

[@TurismoVZ]

@@JayDontGotThis they just done a huge software update to elite series ecus better baud rates over can to obd2 so no more lag over connections

[@mrmoss149]

" Next time the car tries to shoot me into a crowd of people- I've got a chance". 😆😆😆

[@andrewvehrs9714]

We've used a Banks Performance CAN gauge on it ProEfi conversions, maybe contact Haltech to see if that would be compatible. Small single gauge that can switch between monitors.

[@lawrences1347]

Jay would put a 5" tube on his Henry Vacuum if he could.

[@garethsworkshop]

Craig, "its a FORD nobody cares" hahahahaha

[@jpmotorsport4728]

Keep up the sick vlogs J, Merry xmas to you all too at DW 👍😎

[@lb9gta307]

FDF tests their angle kits at one of my local tracks. The kits look like they work well.

[@frankiewalnuts]

Let's be honest, Craig can install and setup that haltech in 40 seconds flat

[@100scans]

Best intro hands down

[@S1Rossco]

Best video start I've seen 😂🤣😂

[@mrmoss149]

" I shall be bolting this on tomorrow." 😂

[@SuperAlicat1979]

A long way to go yet mate but that car looks stunning already health to enjoy awesome it won’t look out of place in driftworks

[@drewsteroriginals4564]

great video, loving following the build

[@shanechopko5523]

First five seconds jay. Already dying

[@deanlewis3514]

I passed one of those cars today the Ford Mustang sitting there eir haven't moved for you what a shame nice car

[@vallevaan]

Bigger angle so you can sidesweep more people while leaving a meet?

[@scottydoo46]

Get a dash and put it in sun visor so can flip it down and have a look when u want

[@ae86racer007]

Hey Jay check out the plex tuning range of displays, they have a small CANBUS enabled display that might do the job for you. www.plex-tuning.com/products/

[@WickedMachineWorks]

Check out the Haltech Can Gauge. It’s a simple tidy gauge that shows you what the ecu is up to. www.haltech.com/multi-function-can-gauge/

[@michaelsummerell8618]

"Next time the car's trying to shoot me into a crowd of people, I've got a chance." It's a Mustang. This will happen.

[@Thedmcke3]

Congratulations on getting the joke :)

[@surenraj6450]

“Oh ‘Rona” 😂🤣🤣

[@Vez-a-tron]

Starkey has grown up and Jay has regressed on the Camber front!

[@vogs72]

I hope Santa is kind.

[@AutoBeta2T]

Great work Jay :)

[@jeevie_m]

The intro made me wanna clear my throat for no reason 😂

[@Hamsteren91]

Its a sn95 you can probably buy the whole car in aftermarket parts 🤙

[@deankalsevicius7610]

Those wires 😥 great content 👊🏻

[@frankiewalnuts]

Just roll the arches

[@albertovo5127]

Look up g-stream the company has new owners and will be reproducing the wide body front end for the mustang.

[@JayDontGotThis]

Thanks I’ll have a look

[@ahmed91750]

Didn’t even realize he was building a drift car , I thought he was building a street car

[@driftworks]

He's not. It is a street car.

[@100scans]

I’m trademarking spewcam

[@dtm789]

Wasn’t the prob measured and checked / agreed in a previous video ?

[@ollied15651]

Yes and he explained how the measurements were done to different points of the driveshaft

[@MDW893]

Can we confirm is starkeys comment was correct lol? Does Jay have a drift license haha?

[@JayDontGotThis]

Not since about 2007

[@vxlgsi]

Christmas presents from Phil.

[@hksp]

seems like the viewer is fdf themself

[@BurpleRX7]

I need to get in touch with them at haltech uk, I got mine through a different dealer and they screwed be right over and my install is not great

[@BurpleRX7]

@Luke C appreciate it will do that

[@benblackwell8108]

2 inch taylor 🤣🔨

[@martinjones4776]

When your DCT`s that fast 😁

[@garrydavis3475]

Getting near the point of no return with Craig measurements

[@deanlewis3514]

Good job don't let it get you down it's just car's drive me mad

[@Jonathan_Doe_]

Good thinking, not only will it take out innocent bystanders faster with 1000hp, it’ll take out more of them at once if it’s more sideways!

[@vipecrx]

Rk001 gang!

[@tomhay6992]

Hahahahaah best intro ever 😂😂😂😂

[@leoncharite6547]

Need videos of j drifting lol

[@chrisg4rr377]

1000hp Jaystang

[@georgef1176]

Holley dominator or even the hp

[@douglasmcdowall5006]

Take a look at these for the flares. www.maierracing.com/product-category/fiberglass/individual-parts/94-98-mustang/

[@finlay230]

The joys eh 😭😝👍

[@davidblanck4131]

There has to be a wide body fender.... oh, sorry "wing" available. Too common of a car not to.

[@thepartypotatopooper6354]

oh no.

[@jamest5149]

‘Just bolt on’... don’t make me laugh... after market wings don’t fit... ever... ask Gaz, ask Phil!

[@jamest5149]

Jay gets presents 🎁 deserved... even if it is gay love 💕

[@michaelw4620]

Please don’t give that guy the camera again 🤦🏻‍♂️

[@theenglishtrucker1849]

Stay Safe from all fake virus's.