"Ah, what a stylish little lamp it is, yes... I shall put it in my mouth." Good old Clive. ;)
@theskett5 жыл бұрын
Coulda' been a cheek-illuminator; cf. the nasal illuminator LEDs in the earlier (?) vajao :)
@glasslinger5 жыл бұрын
CRUNCH! Yes, it's made of glass! OH! Glass shards in my mouth! Oh, oh, oh!
@theskett5 жыл бұрын
@@glasslinger Probably not the first time? Rinse and spit, rinse and spit... :-)
@theelmonk5 жыл бұрын
I look forward to seeing multiple phosphor colours and neon-like lettering. OK, so nothing can replace neon. But it would still look cool.
@klinky5 жыл бұрын
He did a video awhile back on something like that kzbin.info/www/bejne/mGSThWqil6Z5lbM
@afwaller5 жыл бұрын
My gosh but this would be so much cheaper than a custom neon tube though. And no requirement for a vacuum or special gas filled - so you can make the tube out of almost anything, even thermoplastic if you don’t care too much about loss of illumination.
@Ni5ei5 жыл бұрын
@@klinky Those look tacky. It's obviously plastic and looks quite cheap. This new glass + flexible filament version could be the closest thing to traditional neon (including a downside feature: fragility).
@needforsuv5 жыл бұрын
Neon does light 360 degrees truely, but I think LEDs have them beat when it comes to pure monochromatic colours (non-phosphor)
@maicod5 жыл бұрын
I just bought a pink 'neon' flamengo. It was a left-over sale from an expensive shop so the price wasn't expensive anymore ;)
@philoffhistree5 жыл бұрын
Such a good channel no stretching it out just to get the rev, just been on some channels that i liked the subject matter but after 2 minutes i realized the stretch out was so long i quit watching and blocked them, just love you Clive for being so real
@406nova65 жыл бұрын
no clive no comparison between you and ave...you're the best 👍👍👍
@Vidar_Odinson5 жыл бұрын
I do love when we see the vise of knowledge, I need one for myself.
@RavenLuni5 жыл бұрын
A G-clamp works just as well. I call mine the clamp of curiosity :p
@joelthefrog15 жыл бұрын
I have the 120mm one and it's pretty good quality for the price, it's been excellent on my milling machine. www.arceurotrade.co.uk/Catalogue/Workholding/Drilling-Vices/Cast-Iron-Engineering-Drill-Vices
@shemp3085 жыл бұрын
Clive my guess is they used a vacuum to get the filement through the glass! had a little project I had to get a stiff rope though a garden hose! nothing worked! But a vacuum did in a few seconds love you videos and commentary!
@theskett5 жыл бұрын
Or compressed air; "blown fibre" is a thing, after all :-) www.networx3.co.uk/services/blown-fibre-optic/
@addisme75615 жыл бұрын
Clive might have a privet email address for people that want to say “love you” to him. LMFAO😂🤣
@28YorkshireRose125 жыл бұрын
@@addisme7561 Haha....... "Privet" - I'm "hedging" my bet that he does! 🌿
@matthewbeddow32785 жыл бұрын
I really like the fact they used glass although unfortunately a doubt its done by hand , it could be but i think more likely to be mechanised . Getting the filament in the tube i agree with one of the comments that its probably sucked through or blown in , it would be interesting to see how they are made. Thanks Clive !
@heapsmadgirl5 жыл бұрын
"If I touch the wrong bits here, it won't end well." Big Clive, 2019 😂 Seriously though, this was a delight to watch. I especially enjoyed the hand-made diagrams. That is one snazzy dollar store light! 👏
@matthew3p5 жыл бұрын
BellahintheBlueRidge surgeons be like :
@millomweb5 жыл бұрын
Delightful for not being powered up. Enlightening if it was.
@zh845 жыл бұрын
"Pliers: it's the new hammer." You don't just get tips on electrical engineering from Big Clive!
@brabhamfreaman1665 жыл бұрын
zh84 Mechanical fashion tips too!
@technosasquatchfilms5 жыл бұрын
"Ever tool's a hammer", Adam Savage.
@ColtaineCrows5 жыл бұрын
As some country singer sang; "It's vise grips for pliers and pliers for a wrench, wrench for a hammer, hammer's everything else."
@theskett5 жыл бұрын
@@ColtaineCrows "I sure do like him, but he's hard on equipment"; video (lyrics in comments) here: vimeo.com/92432513 Thanks very much for this :-) Edit to add: mo' better lyrics here: genius.com/Corb-lund-hard-on-equipment-tool-for-the-job-lyrics
@gmotagi31655 жыл бұрын
I'm just starting to learn electronics and find your videos very inspirational and informative. Thank you.
@kb5hxt5 жыл бұрын
As a beginner in investigating circuits, I enjoyed your vid very much. Thank you for an interesting 27 minutes.
@StreuB15 жыл бұрын
Any day where the vise of knowledge comes out of the cupboard is a good day.
@DrakkarCalethiel5 жыл бұрын
Brian Streufert In Vices we trust!
@CheezyDee5 жыл бұрын
Pretty sure this is the vice AvE refers to...
@Vokabre5 жыл бұрын
The shape reminded me of travel water heaters you plop into a cup, the ones common in ex-USSR.
@Kuessemir4 жыл бұрын
I love your scientific materials test...my kind of testing procedure.
@jlucasound5 жыл бұрын
I would imagine they feed a thin wire through the shaped tube and attach the LED bits and pull it through. Just a guess. :-) Keep the vids coming Clive, Please. Very addictive and comforting.
@DEEPAKSINGH020419925 жыл бұрын
I don't just watch your videos. I enjoy your videos.
@stevevox49155 жыл бұрын
Yes Clive, yes we do enjoy watching you destroy stuff. When it's interesting that is, but if yer digging out potting compound or searching for "the appropriate tool", the jumpcuts are appreciated. Good work big guy.
@galxieranger82775 жыл бұрын
"I shall bring my doodle in" and video gets demonetized.
@ihateexcessivelylongandpoi44905 жыл бұрын
"I'll measure it in centimetres." We get so many good quotes even if taken out of context.
@Bluscream5 жыл бұрын
Lol
@Madness8325 жыл бұрын
"It's rubbery and flexible!"
@colinpye14302 жыл бұрын
“You can squeeze it gently”
@313Games2 жыл бұрын
Lol
@RavenLuni5 жыл бұрын
A tiny bit of washing up liquid is great for pushing LEDs through tubes - found that out when pushing an LED strip into some clear tubing for an aquarium light (lots of rubbery friction involved) - thought not the best idea but f*** it and it worked amazingly well.
@teardowndan53645 жыл бұрын
One way to thread something through a tube is to blow or suck it through, same as passing optical fiber and other flexible cables through conduit.
@eddiestevenson-kaatsch63065 жыл бұрын
I think filament threading was done by compressed air Clive.
@28YorkshireRose125 жыл бұрын
Agreed, and I was about to suggest the same thing - with, or without, talcum powder to assist the filament to slide on the glass.
@templebrown71795 жыл бұрын
I wonder if there's a phosphor sheet that could go over the HOPI's multiplexed display to smooth the flicker.
@theskett5 жыл бұрын
Interesting idea...problem is, the red (LED) low-energy end of the spectrum doesn't make much (anything?) fluoresce. Phosphor LEDs, OTOH, emit higher-energy near-UV blue.
@ukar695 жыл бұрын
You should do a teardown of colour changing GU10s. I’ve gone through quite a few and they all fail within a year in the same way. Would be interesting to know why they fail.
@alanpatterson23845 жыл бұрын
Mine have been working for about four years with no failures, so it is possible.
@ukar695 жыл бұрын
Alan Patterson mine are in a hallway and kept on overnight so they’re on for extended periods. Ordinary GU10s are fine, just the colour changing ones.
@alanpatterson23845 жыл бұрын
@@ukar69 Mine are on from a time of low-light level (in winter, much of the day) until about 11.00 at night. The only irritation is that they default to fast colour-change when switched on, and it is not worth the effort to use the remote control to slow them. But if ordinary G10s are fine, there is no reason why colour-changing ones cannot work just as well.
@abolfazlkhazaei10145 жыл бұрын
"fortuitous" got stuck on my mind. Thank you 😄
@gaza1022895 жыл бұрын
4:50 "but why what's in there then?" Pretty much the ethos of this channel lol
@jaras19695 жыл бұрын
A quick Google search later and yes: Plumen is apparently still around, making a few different bulbs. Including the classic Plumen 001 as both CFL and dimmable LED.
@rysacroft5 жыл бұрын
Clive, can you please put a cloth over any glass parts that are liable to shatter or explode. Over the years I've had various stuff embedded in my eyes and it's not pleasant :( All my accidents involved opaque materials, glass would be worse because the doctor would not be able to see it. But please keep making these interesting videos. Take care ❤️
@millomweb5 жыл бұрын
To thread that though the glass tube, use compressed air. The tacky filament will vibrate ('chatter') its way through the tube a bit like the neck/tube of a balloon as air escapes from it.
@crazygeorgelincoln5 жыл бұрын
I like seeing the battle of opening fragile things. I'd like to see some more resistive dropper lamp conversions. Makes me think my power tools are more power.
@jamesbrewer30205 жыл бұрын
Thank you for sharing your knowledge on another neat item.
@MalagasOnFire5 жыл бұрын
Nice touch with plumers pliers :P They are final frontier when some screwed pipes don't want to come out or in this case plastic case + board.
@Mike_55 жыл бұрын
The ebay seller might have worked out who you were Clive and sent you a specially reinforced model of this lamp 8:20
@Johniakson5 жыл бұрын
There is never too many lamps, had to order a few.. 💡💡💡💡💡
@Mark1024MAK5 жыл бұрын
Arrrgghhh - must resist the urge to go looking for one of these on that well known shopping site!!!
@PageLess5 жыл бұрын
8:30 "Engage safety squints!"
@Aengus425 жыл бұрын
You could probably blow it through with a little compressed air. Poke the first few mm into the glass tube then pass compressed air through the tube. The drop in pressure inside would allow the higher pressure outside to push the filament through utilising Bernoulli's principal. A bit like those "magic" pipe toys with the string loop.
@RFC35145 жыл бұрын
25:11 - Or connect a suction tube to one end, probably faster than passing a wire through it, and air friction is probably enough to pull the filament.
@martinrocket14365 жыл бұрын
When will you build a nixie-tube-like digit display from flexible LED-filament?
@skmetal75 жыл бұрын
the flexible filaments would be great for mini "neon" signs.
@markp57265 жыл бұрын
You can find a bunch of fairly similar bulbs if you do an image search for "aray flexible filament led lamp" or "art loop flexible filament led lamp". As for getting the filament through the tube, I suspect they use compressed air or vacuum. Another option would be a low-friction (teflon?) plastic tube slipped over the filament, then slip the assembly into the glass and finally pull the low-friction tube out.
@briannebeker21195 жыл бұрын
I have a box of 20 LED bulbs I bought for about $20, fail after about a year or so. I took one apart to see why it failed. I found that the current regulator fails and takes some on the LEDs with it while others survive. I re purposed some the remaining LEDs to make a jack-o lantern light using a couple of lithium cells. While this was kind of useful it does not negate the fact that the circuit is very short lived due to the constant heat the regulator has to deal with.
@TRIPPLEJAY005 жыл бұрын
Clive your awesome mate. I love how you get stuff not broken and break into them, and things broken you fix. Very parallel indeed. Thank you for awesome content. 😁
@markredburn5 жыл бұрын
“Find out Watts inside” see what you did there 😆
@thewhizard5 жыл бұрын
Big Clive's proper use of tools instruction video:-)
@FlesHBoX5 жыл бұрын
You can see at the first curve of the glass from the base that the interior diameter is larger than the diameter of the filament. I suspect it is actually fairly easy to get the filament through with a fish wire.
@BRUXXUS5 жыл бұрын
Oooh... I wonder how viable it would be to create longer stretches of that flexible filament to be used as a replacement for EL Wire. I mean.... it would require some insane voltages in the way it's currently arranged, but maybe shorter lengths of parallel arrays could help bring the voltages down to something safer to be used as a wearable option? hmmm... Guess it'd be pretty expensive right now, but if they could bring the costs down it would be vastly better than EL wire in almost every way.
@hoggif5 жыл бұрын
"Full bridge rectifier" really needs some echo in post processing. Without echo it just is not the same! Other than that, thanks for another good video. Very interesting product, never seen one like that!
@TheEPROM94 жыл бұрын
Recently got one of these for my big lightbulb lamp in my sitting room. Found the light output was a little to high. So I cracked it open (Mine was easyer to open) [I actulay bought 2 just in case]. So I replaced the 51 ohm resistor with a 113 ohm resistor & got it down to 2.8W & a much nicer light output level. Looks super cool inside a giant light bulb. Might do some thermal camera mesurments but it runs cooler now. Oh & why 113 ohm, because it was the resistor value I have on hand closest to 100 ohm.
@Leroys_Stuff5 жыл бұрын
I love the vice of knowledge and anything that swings is a hammer 😂
@LMacNeill5 жыл бұрын
18:35 -- when he's trying to figure out the power dissipated by the PT4515C chip, he multiplies mains voltage (240) times 1.41 then subtracts from that the 265 volts that he measured across the LED string... Where did the 1.41 come from? Did I miss a step?
@bigclivedotcom5 жыл бұрын
The 240V is the average value of the sinewave. If you multiply it by 1.41 it gives the peak voltage which is what the smoothing capacitor will be charged to.
@LMacNeill5 жыл бұрын
@@bigclivedotcom Ohhhhhhhhhh... 1.41 = square root of two. How the hell did I miss that? It's after midnight and I'm getting sleepy, that's how... Thanks. :-)
@Seegalgalguntijak5 жыл бұрын
Clive you're mentioning "traditional dimmers" - as far as I remember, there are 2 generally different types of dimmers and how they work, but I'd love to see a video explaining the differences between those. Also, there are these turn-knob dimmers that sit inside the wall where your light switch is, I remember one being there in the living room of my childhood, and when you dimmed the ceiling lights down with it, it made some sort of buzzing noise. And then there are even electronically/digitally(?) controlled ones, like in those radio controlled power sockets for lighting purposes. Please, make a video about the different types of dimming, how they work and what their advantages and disadvantages are. Maybe even take apart a dimmer switch (possibly even an old rotary one that buzzes below 100%) and show the circuitry, and so on.
@twoscoopsofpig5 жыл бұрын
I'm guessing the tube was run through with a messenger line and *then* heated and shaped, allowed to cool, and then had the filament pulled through with the line.
@guygordon27805 жыл бұрын
Nah. Push the filament thru a straight tube, heat & bend it.
@twoscoopsofpig5 жыл бұрын
@@guygordon2780 I'm not sure the filament holds up to that kind of heat, but that would work too.
@stephenburden20845 жыл бұрын
I was thinking about the glass issue as well i would of thought they would use glass as its recyclable and at the moment most plastics are not and glass would give it a better look as well
@mrfluffytailthethird5 жыл бұрын
Oh no don’t pause Clive We want to see you break it
@bikkiikun3 жыл бұрын
They might have blown air through the glass to keep the filament "floating" (thus not touching the glass).
@MetalheadAndNerd5 жыл бұрын
HOPI should do a Big Clive edition of their meter. Maybe in pink?
@MetalheadAndNerd5 жыл бұрын
@@johncoops6897 Safe?
@MetalheadAndNerd5 жыл бұрын
@@johncoops6897 Are you one of these idiots who think something is unsafe because it's from China?
@tomsixsix5 жыл бұрын
My centre ear enjoyed this.
@bigclivedotcom5 жыл бұрын
Dolby interprets my mono audio and bassy voice as a bass track.
@LeonardAngussmith5 жыл бұрын
There's the Clive I love, lets test for glass , by means of teeth...smiles
@jeffreyhebert56045 жыл бұрын
I love elegance in design
@Reversed825 жыл бұрын
bit offtopic here: if you like popcorn: you can make popcorn in the microwave with your method for making scottish biscuits, just put in dried corn(aka popcorn kernels), some high heat tolerant oil, some sugar and a tiny splash of water. blast for 3+ minutes in a closed container and you've got popcorn (you can also spice things up by putting in caramel syrup or fancy stuff like that) haven't tried but maybe it'd also work without any oil at all since you mentioned the sugar mass heats up pretty well too
@bigclivedotcom5 жыл бұрын
I have a microwave popcorn tub and use butter.
@dylanfinch29514 жыл бұрын
When I used to help a guy put wiring through motorcycle frames, he would put a vacuum on where the wires needed to run to, and put construction line in where the wires needed to start, and he'd close every hole he could in the frame, and the vacuum would pull the construction line through the frame and he'd tie the wire to the line and pull it through. I feel like that is probably similar to how they pull the LED string through the glass tube, they probably pull a vacuum on one end and put a line on the other.
@berndeckenfels5 жыл бұрын
11:25 simple linear current regulator 12:20 suggest lower voltage Why would that be, Doesn't it suggest minimal difference to rms for thermal reasons I.e. higher voltage (if you want to call mains high voltage) - but then again 75v is still quite a big difference.
@gadgetsage2 жыл бұрын
But why the glass at all? Just for shape? Or to make it breakable to force re-buying?
@bigclivedotcom2 жыл бұрын
For shape and insulation.
@gadgetsage2 жыл бұрын
@@bigclivedotcom but LEDs are cool. Wouldn't a little rubber around connections cost less?
@blapty5 жыл бұрын
Love the new PINK confuser!!
@stonedsavage78145 жыл бұрын
AvE fan i see. You have good taste
@diamaunt27825 жыл бұрын
in my opinion, you're too worried about focus and exposure... they're almost all fine (watching in 1080p) before the adjustments..
@diamaunt27825 жыл бұрын
@@johncoops6897 well, that's completely over the top. Clive's cameras on his phone are fine, the focus is fine within the area he's working in, and the exposure is fine too, all he needs is to stop worrying about it so much.
@inal15905 жыл бұрын
Now, my EE theory knowledge is pretty old and unused, so I might have gotten something wrong here, but shouldn't the rectified & smoothed voltage across the capacitor be 240V/1.41, not 240V*1.41? how do you get >240V DC from a 240V AC supply? or do you put the lamp between 2 phases?
@bigclivedotcom5 жыл бұрын
The AC value is the average voltage value of the sinewave. Multiplying it by 1.41 gives the peak value, which is what the capacitor would charge to.
@FarleyHillBilly5 жыл бұрын
RMS is the DC heating equivalent of the AC sine wave which varies between zero and a maximum. The peak voltage of the AC is square root 2 (1.414) times the RMS value for a sinewave. About 340v, you can double or triple that with a suitable circuit I've seen a x6 giving 2kv @ 1 Amp to power a 2x 4CX250 linear amp. See en.wikipedia.org/wiki/Root_mean_square
@mrbigb125 жыл бұрын
I got a good one for you Clive! Can you take a part a wind up flash light, please :)
@scottmarshall67665 жыл бұрын
Vacuum on far side, feed thru with a little cornstarch or mica powder which is vacuumed out and reclaimed? Neat circuit, and neat execution. I'll be looking for one on the 120v market. Edit - I looked thru ebay and it seems like 240v is it, and the UK is the source for ebay, wherever they come from originally. I'm thinking a 2 diode/2 cap doubler circuit hack. That would net about 338vdc max. Looks like DC would be ok with the circuit, might have to back off on the current sense resistor to dim it back down due to the duty cycle change. Careful 2nd stage cap sizing might work too, if small enough to "run out" at the right point. Could be a fun evening hack. It's going to cost $9 us for the bulb, but it's worth it.
@kevinm37514 жыл бұрын
Do you happen to know where someone might be able to purchase just the spiral LED lamp filament without the lamp?
@bigclivedotcom4 жыл бұрын
No. I've never come across it on its own.
@wktodd5 жыл бұрын
Sounds like you're wearing a space helmet! (very loud inhalation) compressor release time too short?
@FarleyHillBilly5 жыл бұрын
Open the pod bay door HAL Tsssh Click Take a stress pill Clive
@Mark1024MAK5 жыл бұрын
Space suit required, as in space, no one can hear as you crack the glass...
@FarleyHillBilly5 жыл бұрын
@@Mark1024MAK Space is vast. It is very black and the nearest thing is further away from the sun than any planet. Why does it feel so claustrophobic ? Like 2001 ?
@groovejet335 жыл бұрын
Yes i remember the Compact Fluresent days with fond memories of running in a sea of Autum leaves, and jumping in puddles of muddles.....ha..ha...ha.........yes..yes....yes memories
@karalynn46465 жыл бұрын
my power went out and my LED ceiling lamp started blinking when the power came on... quick google fu says a driver failed id like to send it to you just to take a look and do what you want with it
@Edsbar5 жыл бұрын
Clive, i think your production is great although some people might think refocusing should be edited out but I think the bits where you say "one momment please" or "I'll pause" should be filmed and edited if needed later. But I like your offerings as they are so just do as you please...
@roscoe4543 жыл бұрын
vice of knowledge..puts new meaning to crunch time! lol
@RaithUK5 жыл бұрын
Big Clive, always the innovative one lol Good video love the LED tech.
@markschwarz21375 жыл бұрын
There is that certain click when you know the plastic bits, at least, have separated.
@FilipLamparski5 жыл бұрын
For some reason I'm not getting any sound through at all on this video on my Windows computer. Seems to affect both Firefox and Chrome-based browsers. Something to do with the recording device?
@FilipLamparski5 жыл бұрын
I should add - when watching the video with VLC Media Player instead, the sound works fine
@bigclivedotcom5 жыл бұрын
It appears to be a conflict with Dolby surround sound. It may be diverting the audio to a middle speaker that doesn't exist.
@seannot-telling98065 жыл бұрын
Clive how aout changing the sense reisitor. How low can you get the current through the LEDs before they go out?
@twocvbloke5 жыл бұрын
I'm sure I've seen compact fluorescents with that shape of tube, maybe bigger than this one, but the same sort of design, so could be a re-purpose of the glass-making equipment as with the traditional tungsten bulb machinery... :)
@SylwerDragon5 жыл бұрын
I'm sure somebody said it before me..but it looks like simple solution.How did they take it inside the glass tubes..simple..use vacuum...that will do :)
@danblankenship57445 жыл бұрын
You mentioned it doesn't work on 115VAC. how would you modify this to make it work? Do you think the LED voltage requirement would require a voltage-doubler?
@bigclivedotcom5 жыл бұрын
A voltage doubler could work if there was room in the base for the extra capacitor. I did take apart a 240V lamp and found a voltage doubler in it. It was driving the LEDs at hundreds of volts.
@morgueaunne65525 жыл бұрын
I'm dreaming about huge Nixie tubes made with these "filaments." If they could make it thin enough, smaller sizes would be possible. But, at this thickness, the viewer would need to be at a distance.
@aamiddel86465 жыл бұрын
I Hope one day yo will add an o'scope. Would be interesting to see the current shape.
@tncorgi925 жыл бұрын
He has one, haven't seen it used in a while.
@guyh34035 жыл бұрын
I think they use compressed air to "blow" the filament inside the glass.
@getyerspn5 жыл бұрын
Oooo I like that lamp ....must get a couple
@dcallan8125 жыл бұрын
Nice.👍👍
@davidgriffin795 жыл бұрын
2017bulbshop is not on Ebay UK, at least I can't find it; in fact I can't find it anywhere. This is a shame as I like the design. As for how they fitted the filament into the glass tube, I would imagine they used a thin solid wire tied to the end of the LED tube and sufficiently long to allow its full traversal of the glass tube.
@brandonb94525 жыл бұрын
Brilliant
@radry1005 жыл бұрын
When do you start filming in 4k?
@bigclivedotcom5 жыл бұрын
When the Isle of Man actually provides a usable Internet connection. It takes hours to upload 20 minutes of 1080P.
@grazianogarassino74383 жыл бұрын
hi Clive, these are the characteristics of the led filament: Length = 300mm, Voltage: DC3V, Current: 50mA, Lumen: 80lm / W, Color: Warm White 2200K Kindly can you design me two circuits one for operation with DC 5V voltage and one with AC 220V To work without problems must they necessarily be placed in a container where the air has been removed? Thanks
@Kineth15 жыл бұрын
01:30 Ah yes, AvE's materials identification test, the classic "Scorch & Sniff" 20:45 I actually like seeing lights dip a little when heavy loads come online, let's me know when the compressor has kicked on for the AC, or when I should race to shut down all my computers because the power company is about to try to fry me. 22:44 OMG, If I didn't have enough reasons to love this channel, he cares about the small screen users!
@AlexanderBukh5 жыл бұрын
17:14 what a gay calc
@masonp13145 жыл бұрын
I'd really like to see a tear down of smart plugs. With winter coming up, I'd rather pick up a smart plug that can power the lights right
@Fee.14 жыл бұрын
“Oh no don’t pause Clive we want to see you break it” 😂😂😂😂
@iStormUK5 жыл бұрын
Such a lurid looking pink calculator, does it come with a glitter finish too?
@Darieee5 жыл бұрын
yay - managed to order 2 of these bad boys ! thanks for the tip
@Miata8225 жыл бұрын
Very nice. It isn't that difficult to bend lab tubing. Have you seen a source for that flexible silicone LED filament?
@bigclivedotcom5 жыл бұрын
I've never seen them outwith lamps.
@grazianogarassino74383 жыл бұрын
hi Clive can you help me? I bought some led filaments like the ones you show in the video you can show me a simple circuit with non-complex components (diodes, resistors and capacitors) I don't care about the small size that it works with 220 volt ac voltage thanks
@bigclivedotcom3 жыл бұрын
It would depend on the voltage rating of the LED filament. Some are low voltage parallel arrays, some are 24V and some are much higher voltage.
@johnrehwinkel72415 жыл бұрын
I would have applied the Vise of Knowledge to the lower (hollow) part of the base, avoiding the top flat part that holds the glass tubing. I think that would have had a lower risk of breaking the tubing, and applied more force where you wanted it: between the lower and upper plastic parts.
@CanizaM5 жыл бұрын
Definitely a repurposed CFL base, and maybe the tubing.
@aaronbrandenburg24415 жыл бұрын
I was thinking the same and yes they do have actual neon that uses a CFL base I've seen them.
@MrWonderhung5 жыл бұрын
Hi Clive, Love all your videos, been a fan since around 2010, love your soothing Scottish voice! Now I didn't know how else to contact you, but can you do a video about rejuvenating laptop batteries, including their controllers, as I have scoured the net and can't really find anything that addresses the problems with why they wont work after changing/recharging/replacing cells. I've a ton of them and really don't want to tear them apart for just the cells, if the controllers can be put to some use. I know there are a plethora of types/styles/models etc, but maybe if you can autopsy a generic HP or Toshiba maybe Dell that would be great. Look forward to learning.
@guygordon27805 жыл бұрын
The accent is Scotland's 2nd most valuable export.