Inside and Out DETAIL on A KENWORTH VAC TRUCK!

Here's all the stuff in the order I used it to clean up this fine Kenworth Vac Truck from Feeney Brothers Utility Services!👇👇👇👇
Milwaukee 0885-20 M18 FUEL 3-in-1 Backpack Vacuum (Tool Only):
amzn.to/3RdHQIx
M12 LED Underhood Light (Tool Only):
amzn.to/3BFWrXN
Tornador Z-014 blow out tool:
amzn.to/3xPWDT3
Milwaukee Electric Tools MLW2504-20 M12 Fuel 1/2" Hammer Drill (Bare):
amzn.to/3R2OP7n
DETAIL FACTORY ULTRA SOFT DETAILING BRUSH - LARGE:
www.chem-x.com/collections/de...
Chem-X Interior Green Tea Scent:
www.chem-x.com/products/inter...
Chem-X HEAVY DUTY SUPER CONCENTRATED TRUCK WASH + DEGREASER + APC: www.chem-x.com/products/heavy...
iK Foam Pro 12 Pump Sprayer: www.chem-x.com/products/ik-fo...
iK Foam Pro 2+ Pump Sprayer:
www.chem-x.com/products/ik-fo...
iK ALK 9:
www.chem-x.com/products/ik-alk-9
iK Telescopic Lance *not compatible with iK Foam series sprayers
www.chem-x.com/products/ik-te...
Chem-X STARS+STRIPES TOUCHLESS SUPER CONCENTRATES: www.chem-x.com/products/stars...
THE REAL DEAL - TOUCHLESS FOAMING KIT:
www.chem-x.com/collections/to...
1/4" Prevost Safety Air Plug Coupler ISI061203 1/2" FNPT High Quality Prevo S1: amzn.to/3pmhLLT
AZUNO Digital Tire Inflator with Pressure Gauge:
amzn.to/3DNcOEm
My Reelcraft Water/Air/110v Power Reels: www.chem-x.com/pages/reels-booms
Echo CPLB 58V2Ah Lithium-Ion Brushless Cordless Blower: amzn.to/3gLLoCh
THE COMPLETE MOSMATIC WALL BOOM EXTENSION KIT (TOTAL REACH 24' 7"):
www.chem-x.com/collections/ce...
Chem-X Awesome Sauce Detail Spray:
www.chem-x.com/products/aweso...
Edgeless 245 Microfiber by The Rag Company:
www.chem-x.com/collections/mi...
Chem-X SNAKE OIL TOUCHLESS SIO2 CERAMIC FOAM SEALANT: www.chem-x.com/collections/li...
Chem-X Tire+Trim:
www.chem-x.com/collections/li...
Chapters
0:00 What we're up against
1:15 What we're gonna use to get it clean
1:33 Emptying out the cab
2:02 Vacuuming with Milwaukee M18 Backpack
3:40 Tornador Z-014 blow out tool
4:30 Drill detail brush hack
11:09 Seat extraction with iK Foam Pro 2+ and Ridgid Vac
14:41 Degreasing with iK ALK 9 and new Telescoping Lance
18:31 Stars+Stripes touchless wash
21:42 Results
23:03 Snake Oil touchless SiO2 sealant
23:54 Final touch ups and reveal

[@andykrebs4915]

YES! I run a vac truck full time and have been wanting to see you clean one because I know (first hand) how dirty they can get. They usually see more dirt than the average OTR truck and can be a whole chore to get looking right. Thanks Bob! 🙌

[@ravemaster7405]

I operate a vac truck and not only is the vac truck caked in dirt on everything on the inside and outside it also got my car looking like the same way. It's by far one of the dirtiest jobs out there.

[@darrenspremiumautodetailin8235]

That’s why I’ll keep buying your products- they work and you’re actually HONEST IN YOUR VIDEOS!!!

[@callanmurphy9807]

Honest in his videos about his own products is what I like, so I'll be getting some in the future too

[@laurapalmerTDGE]

What you see is what you get and nothing else. Honesty has always been a great asset and quality is paramount. There is no reason to use anything else, unless you want a white deposit on aluminum from the heavy alkaline products. Have fun with it!

[@BubbaJohnGaming]

You should try your Stars and Stripes with a hot water setup and see if that takes it even further!

[@redheadeddude6863]

Ive been wondering when a new video was coming. Ive watched all your videos at least 3 times each lol

[@Sanyey]

This line of new content actually got me interested.. I'm following a lot of detailers on youtube, and I'm kind of a detail maniac myself on my daily and hobby cars.. I'm a mechanic, and often deal with the utility vehicles of our city.. they are mostly run down 20year old garbage trucks, plows , curb cleaners , that kind of stuff.. I was always interested about how they would look after a thorough treatment by a pro after all these years of neglect.. keep these coming 😀👍

[@Warthorg]

Keep up the fantastic work! I love how dedicated you are. Thank you for the professional camera work!

[@nbates723]

You’re a brave man, cleaning that truck with no gloves!

[@Saddedude]

Love your honesty man. I have extensive experience doing industrial tank and vessel cleaning in the oil and gas industry. Our fleets get run hard down hundreds of miles of industrial (gravel/mud) roads. I know what it takes too clean a vac truck and its no small task. Something i do 3-4 times a week typically. I have no idea what causes the streaking you see but i see it as well up in Albeerta. You need some distribution up here man.

[@dedianugrah1513]

I like how you take care attention to detail ini every video, so Long not upload, I've been waiting for to long. Amazing job

[@AcuraAddicted]

Man, what a life and work! Just hang out by yourself and do what you love. Amazing!

[@josephmalinowski6817]

One of my first jobs was working for a auto detailing business and then opened up my own business. Right now at work for the town Sanitation and I drive either a Mack or a International with a rear loader for residential neighborhoods. But you can see witch trucks are mine because I cannot stand a dirty truck so I'm always cleaning it. You don't have a easy job cleaning other people's vehicles. I will say you have some nice tools for the job. 🙏

[@kbrown1350]

Love the idea of using the detail brush with the drill!

[@josephmalinowski6817]

I will say I remember I rather have a filthy car or truck to clean then a cleaner car. When you have something that's really filthy people can see the difference and the work you did to clean it and make it look new then a clean car that's going to basically look the same. I like that detailing brush that you have hooked up to the Milwaukee M12 screw gun. Does a great job getting into all areas.

[@JoseDiaz-bk9mh]

Probably the cleanest pre wash super sucker I’ve ever seen😂

[@ben.lan82]

„I don’t think you should hit alternators that hard…” - proceeds to inject soap at point blank range with 50 psi foam cannon

[@henryjennings7570]

wouldn't matter if you did hit it with water really. you can run an engine underwater as long as you don't get water in the air intake. that's why most landrovers have snorkels

[@santhiyakumar1662]

Interior!!!!! Mind-blowing

[@OutDoorAdventures_1907]

From some someone that would like to buy your products I really liked it when you showed on the video what you where using and when. Please also add just water rinse. Your videos need to be a big infomercial. It's cool watching but, most of us want to know how to do this at home. Thanks for sharing!

[@chaoszombie9995]

Why do i feel like there was a sense of Sarcasm when you said "I cant believe how durable these are..." lol

[@devanthompson8541]

Dude! Absolutely love your vids just trying to find out why you have literally EVERYTHING 😂 I love your setup man!

[@tuckerbeddiges]

I got the ik 1.5 a while ago and while it is definitely too small to do anything big, I find it super useful for cleaning mountain bikes

[@sebc58]

Great job as always 👌

[@crazzyskilled6181]

really great seat extractions it turned out amazing

[@mistahpahkah5876]

Finally a feeney vac truck. I been telling them about y’all. Shout outs to TOC Detailing

[@lllllRBlllll]

I'm sure someone mentioned it already but the important looking guarded switch is the interaxle lock. It's an air switch that when toggled engages the front drive axle to help pull along with the rear drive axle. It's the big truck equivalent of 4x4. On heavier spec'd trucks it's usually beside two other guarded switches that engage the differential locks for the two drive axles.

[@jamal_ka]

Hey man, It works great and without any problems.

[@sergiolopez9152]

Exelente trabajo de limpieza quedó al 💯💪💪 saludos desde Tijuana BC México

[@scotterman7951]

You Are The Best Truck Cleaner Business

[@100GTAGUY]

Personally when it comes to cleaning an engine (not for removal or overhaul but general cleaning) i generally opt to use a garden hose over any sort of pressure cleaner. Still gotta be cautious about electronics or openings but you dont have to fret about damaging seals or gaskets. Degrease/apc, agitate with a mild bristle 360° brush, soak er down with more degreaser/apc, dwell, agitate, rinse, repeat until desired finish is achieved, one final flushing rinse and some agitation with a clean brush to remove any remaining cleaner residue which may etch or streak, blow dry. Bit more time consuming but its worth it just in case imo.

[@joe.olivet]

Excellent. Love it.

[@SebaGiam]

Great job bro! Gotta visit the shop someday

[@DrakeGodskid4442]

May God bless you all who's ever reading this 🙏💖🙏

[@Dcervantes243]

I use the mini ik foamers for wheels. I do regular auto detailing. So. One wheel at a time its perfect. And also for foaming rinseless wash such as ammo frothe. One panel at a time.

[@AAANDN1]

Kool biz you have dude.

[@_Julie_Bee]

Oh yesssss!! 😍

[@savinglife1995]

Nice work brother 👍

[@mtgut1962]

Nice job Mike. These trucks take a beating and get really dirty.

[@sekypredatorhunt2152]

Can we get some details/video on your vacuum/extractor setup?

[@subhromallick2486]

Bob, how about investing in a good set of drill brush attachments for the bigger parts of the floor. A combination of larger soft bristle brush for larger areas of the floor with the smaller brush for tighter areas would in my opinion increase your efficiency I feel. Give it a thought if possible. And amazing content as usual ❤️

[@gsservicestation5808]

Hii sir big fan from India 🇮🇳

[@tucksmith8300]

Looks good

[@minutemanmac]

Wish I could get the Ok to bring one of our RR trucks down there for you to do. Id love to see how Heavy Duty does on layered on rail/rust grime. It's almost impossible to get off

[@Stormtracker0071x]

I watch one video and I go to subscribe immediately

[@miketrithart9224]

one of the cleaner small hydrovac trucks, most of the time they are covered in mud and oil

[@BelLavoroAutoSpa]

I too love a good schrader valve bob

[@ravemaster7405]

Damn that vac truck is spotless compared to mine. Come out to las vegas and you can clean mine. You'll be in for a treat. make for some great content.

[@tdwl4373]

"Satisfied laughter at clean fire extinguisher"

[@E85_STI]

I have a homemade rigid vac extractor so is that what you are using as well?

[@humzakhan2149]

Would you recommend using the degreaser through a foam cannon?

[@thomasbrustad5596]

by the way, do you have a under the vehicle spray nuzzles? Being retire military we had heavy duty spray nuzzle wands that we could control from a lever from inside the control room at the bird bath.

[@Sargento_12]

I wash pneumatic tanks any products that can clean those or any acids ? I’ve been using degreaser but doesn’t seem to be doing the jobs any tips?

[@lmCIoudz]

Awesome videos man. Do you only do large vehicles? I am working on my CDL now, and I really hope my company lets me wash the truck haha

[@mannymolina4459]

I think the 2+ would be great for someone who doesn’t have a warehouse full of product and is a little more conservative with their spray lol

[@auciellon9871]

Hey bud I was trying to find the shop vac attachment, is it in the links above?

[@burtbrooks7731]

Bro I got 2 more of those big ol girls that need washed lol, they get nasty man, hell of a good job cleaning it up👌👌

[@mariomcmichael3230]

Can all of your products be used on regular size car and trucks or is just for big rigs?

[@denisgoncharov5255]

Can you show your Ridgid vacuum extractor setup?

[@rhvreramon]

What’s your thoughts on dry ice blasting?

[@PapaJohn1969]

Where were you in 1997? I had a 1996 Kenworth W900L that needed deep cleaning inside and out.

[@braxtonhaney7904]

Dome lights are on screen in the cluster gotta go to settings and select dark cabin and they go off and stay off

[@mikealderson7382]

Hey bud, does your interior cleaner also leave protection behind ?

[@mikeschulte4271]

Love how detailed u are! But I would be afraid to break the electronics with the spray like the seat controls and other switches u were scrubbing unless I knew they were waterproof

[@josephwhite6532]

I have been trying to convince our company to try your products. We have Vactors, a different form of this truck. They get extremely dirty, they spend most of there time working rather than being driven.

[@thomasperkins1833]

Great job I only have one question where are you located

[@frankcurley]

It ain't that bad, that truck is pretty new...give it 2-3 years, they won't bother anymore.

[@codyflint5025]

Do you know if m shine works good on Crome?

[@thomascummings454]

man you good....

[@C3Roach]

hey what digreaser did you use?

[@mrwyattsl]

If you would please, I would like to discuss shop layout and equipment used in your videos. I have been a subscriber for awhile and the last 6 months I have been in negotiations with a net lease business to open a niche carwash, for everything with a motor that one takes pride in. As such, I would like to build about 2 or 3 bays similar to your setup and equip it exactly like yours, your equipment and everything. So please, let us talk about this into a chain.

[@jjkunzli86]

I want to get ahold of this stuff for New Zealand

[@MecheX]

Please share the link to the power washer you use.

[@chuck_1519]

Hey I don't know if you'll see this or heck anyone with recommendations I got a car that's got a crap ton of concrete residue in it(used to work at concrete plant) got any recommendations on getting it out

[@carljones3515]

👍👍👍👍👍👍👍outstanding

[@dandavis5767]

Foam pro 2 could be good for bikes

[@newhook36]

How long do you generally take for a truck interior?

[@gt53r69]

Is there ANY Way of getting this shipped to Europe ???? Been wantin’ to try it SO bad 😢

[@AliAllenson]

Hello! Please tell me how much is the washing vacuum cleaner ridgid and his model

[@agnes1371]

OMG ITS POWERWASH SIMULATOR IN REAL LIFE😮😮😮😮😮

[@matthewhewston215]

How much to do a F350 dialog crew cab and 43’ fifth wheel camper

[@georgestrobl6510]

Wear did get the brush for the drill

[@ShAkAxStAtUs]

Is there any way I can get orders shipped to Hawaii?

[@okan702]

BOSTON!

[@1tuffzx10]

Where are you located? I would love ❤️ 😍 2 have my truck super detailed 🤷🏾‍♀️🤔?

[@deanclark9331]

That's how you clean

[@tony7810]

It looks like detailing what's the cost ?

[@rickyjohnston3000]

Man! That job sucks!🤣🤣 Get you a head mount for a go-pro!😂 Have a question...recommendations for cleaner heavy soiled/greenish exterior on campers?? Love the videos by the way....

[@sridharpanuganti1201]

How much cost brother one service from truck

[@o6speed6]

Do you ship to Canada?

[@barrycook8116]

What did you charge for this job?

[@alexisvillatoro3492]

Alguien sabe el nombre de las microfibras que utiliza?

[@ricochetey]

A Big Rig with proper batteries should last hours with dome or even running lights on at least in my experience.

[@DoomMunkeyX]

You wanna see a vac truck with some grime? I work in a lime mine. This thing is MINT condition compared to what we got.

[@toddhefer6084]

Praise God. Looks nice. God Bless in Jesus Christ Name Amen.

[@wineinbeautifulplaces1200]

I have the same dog and same age

[@mystictk4149]

Upload more!!!

[@JAKEY-000]

You should get yourself a GoPro chest mount

[@taylordougherty292]

Just use a damn air hose on the interior with the doors open. Floor is gonna get dirty anyways when washing the outside

[@felissasmith]

Have u consider getting a GoPro? It will free up your hands 🙌🏾

[@user-rx4kc8ij5f]

Cuanto vale un camión como ese?

[@davidboyce6427]

Allow me to suggest an additional arsenal that foams and comes in 3 ,5 10 gallon size air pressurized kegs. When u have time check out the KZbin channel: DetailKegs. The creator of this foaming capabilities is Dave Barker. He demonstrates cars, buses, van and he has extensive experience in cleaning heavy equipment vehicles. He’s based in Utah. Dave’s approach is all about efficiency 👌 Love your channel and your German Shepard👍. Lastly his kegs foam with draw dropping results 👍

[@charlesnelson838]

Aren't you afraid that the liquid might mess up one of the switches