FULL DETAIL and TOUCHLESS WASH on A FILTHY KENWORTH CHIP TRUCK!

[@cormacjeffers4544]

Sweet video! You're issue with the Kranzle more then likely is caused by the cord being wrapped up still! That's super bad for it! It's hot because of the electrical resistance! Unwrap the cord and un-reel the hose the entire way and I bet it will work much better! Top work from an Irish guy living in America! 🇺🇸

[@sebc58]

I bet the shop smells like Christmas with all the tree shavings. Great job

[@nickbrnco]

It would be amazing if you made a playlist of all the music you use in your videos. Keep up the amazing work. I recently got into detailing after watching a few videos of your and i have bought a few of your products, and i plan to buy more

[@Captkb]

Bob, I use a Kranzler same machine just took it out of that rolling case and mounted on the wall and I use your Real Deal injector and 100’ hose bot reel for stars and strips also use one of those foam cannons for the other stuff like snake oil, etc. My machine works way better than what happened here. I never have issues like you had and my setup definitely has more power. Something must be up with that machine.

[@DuncHank]

Those detailing factory brushes are the best out there. Whilst you were using the small one on the door I was thinking you need the big on for that, and then bam, there it was!

[@dynamicdetail1584]

See my man....This is why I support you and will be buying your products for the small fleet wash I do. Cause your the real deal! You put your product on show using a real life pressure washer for detailing. Most company's would just show the results with their 4000psi heated, blow anything off tools but you show the results of real world guys using ordinary equipment! The results speak for themselves....your shit just works!!!! Thanks man!

[@detailit]

I Love that you used a Kranzle... your machine sure does it quicker and Better!😁 Great video as ALWAYS Bob❌️

[@anthonyweiss7281]

Having run one of those kranzler pressure washers you issue is the combo of the extension cord reel and leaving the wire wrapped up because it definitely wasn’t preforming like it should.

[@santhiyakumar1662]

Obsessed with ur interior wrk.jaw dropping

[@gustavocastillo8892]

I had a problem like that with my kranzle on summer time running mobile 115 degrees kranzle said it was the capacitor but that was not the problem i change the gfci plug for anothe gfci from amazon and haven’t had a problem yet

[@23431]

Happy Birthday Kona

[@GrullonTech-Auto-service]

Greetings from the Dominican Republic 🇩🇴 in love with your work and professionalism

[@urcousinfromboston9052]

another stellar job!!! Them tree trucks take a god damn beating, guy takes care of his equipment!! Cant wait to see how snake oil works with the snow 🤷‍♂ - Have a good holiday Chem - X !!!

[@_Julie_Bee]

Awe, I miss fall time as a kid when we'd go with our dad and uncles and cut wood . I can still smell it! Great job on the cleaning, love your videos!!

[@stephenlouden480]

you my friend are awesome. forget that. just use the extractor on the floor too. easy and quick

[@waltergrimes1930]

Happy birthday to beautiful Kona hopefully many more

[@dougkratz5269]

The audio is awesome! Great production Bob

[@davidwoodworth2792]

I have OCD and your awesome detailing videos are like candy 🍭

[@sabrina6499]

Happy Birthday sweet Kona 💕😍🎂

[@ruanggue]

Can I come to work there? i am from indonesia and i really like the job like you do

[@ruanggue]

@Chem-x for chem-x is there really a giveaway like this?

[@trennismyers2833]

Outstanding job. I really enjoy watching you clean up all of the trucks.

[@CalabreseAutoDetail]

Maybe the kranzle was tripping because you had it plugged into an extension cord. Make sure to plug the power washer directly into the outlet with the supplied cord. I used to have that problem with my machines. Never had a kranzle tho. overpriced junk haha

[@evanshess283]

Just placed my first order. Been wanting to try it out for a while now. Can’t wait to try it out on our fleet of tree trucks. Love the videos.

[@alfsimmonds1569]

Very impressive indeed. I like the way it turned out. 🤘🤘

[@habichuelasolutions6849]

Well I’m going to have to buy uourcsruff

[@matthewrubano1693]

I bet that’s about 2gpm out of the krantzle… spray it in a 5 gallon bucket for a minute and measure how much you get… I bet you have an issue with the machine… thanks for videos and great products

[@kinghebertot7817]

Didn’t see u do the windows

[@jodyguy708]

I'd like to see a fire truck come through, firefighters are picky on how their rigs look lol

[@UnniG]

Classic cleans🎉⭐️✌️

[@devon3800]

Love these videos. Have you ever gotten any benefit from a stronger dilution of snake oil in your testing or is there diminishing returns after an 8:1 dilution? For example longevity and hydrophobicity. Thanks for posting!

[@adrian.albiter]

CURTIS!!

[@massimolomonaco5704]

Ciao, bravissimo io ti seguo dall Italia devi fare video più spesso.....

[@reecebanfield8567]

the big brush looks like a shaving cream brush

[@Gabbrrys]

Love these videos , more satisfying cleans please ! Awesome stuff 🫡

[@tucksmith8300]

That truck looks good

[@english3618]

It's a good job ypur soaps are awesome at removing dirt, as that jetwash was rubbish hahaha

[@deathlands10]

Did you go to landsdowne last night and see an emo band in those jeans…

[@jacobsanchez9039]

I am very new to the detailing with power-washers, but what I have been researching warns about using anything over 2000 psi. Have you ever had any problems with washing at 3000 psi? Thanks for your time in making these videos.

[@mikeklein318]

Just watching u work , and the detail of work the drives were a hospital gown. How do u figure ur time ?

[@Ajorge1332]

I’m curious to why not start from top to finish in the interior?

[@autocleanet40]

I love your Channel and your work 👍

[@Mr.El_Guapo]

Does Snake Oil tend to leave waterspots if not dried after rinsing off? I hand wash 2-3 trucks every weekend and want to protect their paint (also makes it easier to wash when dirt doesn’t stick like on bare paint) but I don’t have the time to towel dry after their washes. Also I don’t have a leaf blower yet. I’d love if you could do a video on snake oil not dried after 30min, 1h and overnight. I was using CarPro Hydro2 for a while on my car and it will leave waterspots if not dried. I also live where we have hard water

[@ml7327]

Remove power adapter, fix the problem

[@pikey13666]

Anyone know what towel that is he was using on the interior? Seems like his goto. I was thinking miner towel. But idk

[@kirktitgen7453]

Dont like that pressure washer compared to your big one that had no problems

[@johncallander886]

Just knock those cup holders out next time. same with the ash tray

[@joe.olivet]

Nice job. 😎👊🏻🔨

[@djhaloeight]

Great job. I wanna know more about that Rigid extractor head you got going on there.

[@bagomoyo]

(⚡️ 🔌 )+🐍=🔥🚒

[@jackburns241]

Can you show us how you made that extractor

[@IceZag]

Can you doa TOUCHLESS WASH and HD APC on heavy equipment?

[@DonDomel]

5:12 link to the brush please :D

[@ethanblan435]

It’s called the curveball from detail factory

[@joseperezmartinez8661]

what type of setup is that with the dressing for the tires. how can I make one or get one

[@damyoulookinfly]

Loving these vids man.. Dialed in! Honest question, do you ever have concern for long term exposure to the soaps/chems getting in the skin from splashback?

[@jshawsgamingnetwork4076]

I might have a little tip on how to save some time, start from the top of your work and work your way down, that way you aren't going over the same place twice

[@94muddertrucker]

Bob, you sooo need a Go-Pro man lol.

[@brianbrooks6974]

Have you ever used your stuff on a fire engine?

[@austin42891]

What kind of extractor do you use?

[@Abelgeosurvey]

Good job 👌, please What product used to polish wheels?

[@D0lo18]

Hey man, how do you feel about starting a fleet washing business with a trailer I pull behind my truck I’ve been thinking on doing it for months now and have previously done it for a company. Just wanted to get ur thoughts on it

[@davidboyce6427]

How much psi do you add to your ik pro12 when foaming?

[@denisvidloga4072]

🔥🔥🔥🔥🔥👍👍👍👍🔥🔥🔥🔥🔥🔥

[@SUGERPIE999]

Bro thorw that power washer away, that's the worse thing I saw today

[@user-kh5it1lj7i]

🙂🙂😆👍

[@brendandunleavy4074]

So I’ve always been confused,is this a fulltime detailing shop or shed? Customers in and out? Or is it a RnD facility for chem x?

[@greggriffin3242]

Can we see you clean an old truck with all dirty, nasty wheels?