Install window tints at home perfectly - Inspire DIY Kent Thomas

[@ThePepperford]

What a bloody good video. No music just good solid information 🙂. Subscribed

[@passpoussa9254]

This is a great video with lots of useful information. It's great to have an Australian voice too ! Very friendly and comforting ! Thank you for taking time with all the tips.

[@InspireDIY]

Thanks so much Passpoussa, that's a lovely comment! all the best with your tinting project. Kent

[@jackfromthe60s]

Kiwi?

[@khudajabegom4004]

Thank you soo much for this fantastic video I'm a single mum, trying to insulate my window getting ready for colder months in the uk and watching your video has given me confidence to do it myself!! Thank you again!!

[@InspireDIY]

Hey Khudajabegom, you are most welcome, and thanks for letting me know it was helpful. cheers, Kent

[@khudajabegom4004]

Thank you! I look forward to learning more from you! 😊

[@cflambe]

The use of adhesive tape to split the layers? Brilliant!

[@InspireDIY]

Hey cflambe, such a handy trick hey 👌 Kent

[@roxette24]

I watched this to learn how to do my own home window tint myself, but I also learned that baby shampoo can keep snorkeling goggles from fogging up 😱🤯

[@InspireDIY]

Haha, a bonus tip you didn’t know that you needed😂 good on you Roxette. Kent

[@cab6092]

What other shampoo product can you use?

[@InspireDIY]

Hey CA B, great question mate, because we are using it as a surfactant- any shampoo could be used, baby shampoo is recommended because its is relatively clear, neutral pH, and doesn’t negatively impact the adhesives in the film like a detergent may. Best of luck🤙 Kent

[@InspireDIY]

Links to products… Johnsons baby Shampoo amzn.to/3jwvhKm or eBay ebay.us/2gLU5s 👍 Kent

[@alexa.davronov1537]

Goggles? What do yo mean?

[@Jak000]

When I installed mine a few years ago, I didn’t even realize that there was a removable film so I ended up putting it on with the tint side facing the window and the removable film facing towards the inside of the room. It still stayed on there and sealed properly, and when I wanted to remove it, it came off with no issues. I’m sure that it was not intended to be installed this way, but it seems like film still worked just fine. Just another idea on getting tinting that is easier to remove since you mentioned that in your video. Anyway, thanks for the great videos! I’m going to install some more soon so I wanted to brush up on how to do it when I came across your videos. Great content!

[@InspireDIY]

Hey Jak, thanks for the lovely msg mate, great to have you on board, let us know how you get on with the bedroom you are tinting👍 cheers, Kent

[@rubenhinojosa7374]

I live in Southern California the summers are brutal 🥵so I’m tinting this spring , Thank you so much I really appreciate how you used the suggestions ! 👍🏽🤓

[@InspireDIY]

Thanks Ruben, I'm glad the video was helpful mate, best of luck with the project. Cheers,, Kent

[@LaydeeLia]

Thank you, Kent! Thank you for sharing your experience, your knowledge, your tips, and for leaving up the other video of your first install (and it's mistakes)! Really very helpful! Thank you!

[@InspireDIY]

You are very welcome LaydeeLia, thanks for the lovely comment. Kent

[@robertwright9223]

Great job instructing. I’ve never done it before and you made it simple. Thank you from Massachusetts.

[@InspireDIY]

That’s awesome Robert, thanks for letting me know it was helpful, all the best from Ausy 👍Kent

[@feffybermudez7192]

Great tips! I followed your tutorial to a tee and got excellent results with minimum effort. Thanks for posting this!!!

[@InspireDIY]

That’s awesome Feffy, we’ll done👌Kent

[@mpringle6239]

I was ready to give up on installation. Couldn't wrap my mind around reaching underneath to remove the coating. The 'backwards' tip - GENIUS!!! Using that tip, the film went up easily. I am encouraged to take on a couple more windows. Thank you!!!

[@InspireDIY]

That’s awesome mpringle 👌 good on you - and thanks for the lovely comment. Kent

[@michaelputelli8640]

Thank you for the great video! Doing this for a baby nap room and this gave me confidence to knock it out!

[@juliat.9688]

Love how you explain things. Very easy to follow, good info and to the point. Feel like I have a good chance at getting this right now 😂 lets give it a go 😁

[@InspireDIY]

thank you Julia, that's a very kind thing to say. All the best with your tinting project mate, Kent

[@Scryder]

Hey Kent, I just looked up how to install window tint and found your videos. Now subscribed as well, as I need more diy inspiration. Good work mate... Love the tips on this video... Saw your first vid initially, this is more helpful.

[@InspireDIY]

Thanks for letting me know Scryder, I appreciate that. great to have you join me DIYing. cheers, Kent

[@andydamfino]

Thanks for sharing, followed this exactly, came out near perfect, first attempt at applying tint to anything.

[@InspireDIY]

Well done Andy thanks for letting me know, I’m glad it helped🤙 Kent

[@RomboutVersluijs]

Many thanks!!! Im about to do our office windows and was looking for some tips. Especially that film separation tip is so handy !!!

[@InspireDIY]

Good stuff Rombout, all the best with the office windows. Kent

[@kathysoutheren73]

Thank you Kent for the helpful tips to get this right. It worked a treat.

[@InspireDIY]

That’s awesome Kathy, well done mate 🤙 Kent

[@DieciBoutiqueRestaurant]

Thank you my man! I really enjoy the vid and I'll get on to instal my window tints.

[@InspireDIY]

Cheers Gianfranco, let me know how you get on👍 Kent

[@DieciBoutiqueRestaurant]

@@InspireDIY Will do :) cheers

[@michelleminton5626]

Doing this this weekend, thank you so much for posting this video, it will help me so much!

[@InspireDIY]

Hey Michelle, How did you get on? let us know any tips you came across that you may want to share, Cheers, Kent

[@davidrogers9749]

Very helpful video, l feel comfortable enough to do my own windows! Thanks!

[@Tipko]

One thumbs up for the video and two for taking the comments maturely! 👍👍👍

[@jerryjohnson590]

Thank you for the video! Mine did not go as smoothly, but your video kept it from being a waste of tint and money! I appreciate you

[@InspireDIY]

Ahh cheers Jerry, lovely comment mate, and I’m glad it came right in the end - thank you🤙 Kent

[@rubenzarate9004]

Thanks dude. I followed your step and they came out great 👍🏼

[@InspireDIY]

Oh that's Awesome Rubenzarate, well done! Kent

[@Ryaniwk]

Thanks for the excellent video. I just did 2 tall windows in my studio using all the technics shown in this video. Thanks, mate!

[@InspireDIY]

Well done Ryan, that’s awesome mate 👌 Kent

[@jakekovacevic3435]

Just finished nightshift and you’re voice put me too sleep had too rewatch the video but very good information mate thanks

[@InspireDIY]

hahaha Jake, that's the best comment ever.. gave me a laugh, thanks mate! Kent

[@johnwalker3834]

Excellent video. Thank you very much for posting this will all your great information and handy tips.

[@InspireDIY]

You’re welcome John, thanks for the lovely comment 👍Kent

[@MelissaHaley-nu8xj]

Tape to split is awesome! Also, if you roll up the tint inside out, separate just the too & spray the sticky side a bit & roll back up (tighter) the backing sticks to the outside film & just pulls off. I don't know how to explain it well, but it's a game-changer!

[@InspireDIY]

Hey Melissa.. that’s an awesome suggestion 🤙 well done mate. Kent

[@jenniferthernandez33]

Thank you 🙏 for doing another video with all the wonderful tips because mine went on without a hiccup 😊

[@InspireDIY]

ohh thanks for the lovely comment Jennifer, good to hear the tinting project was a success. Kent

[@sharmilabandyopadhyay2884]

G'day Kent! Thank you SO much!!!

[@InspireDIY]

Hey Sharmila, you most welcome mate🤙 Kent

[@motocache6645]

Using the tape to seperate the film from the backing is a god-saver... So simple, idk how I've never thought to do that before.

[@InspireDIY]

It’s the little tips that help out hey! Good on you motocache 👌 Kent

[@jackfromthe60s]

Great video. Almost every other video talks about doing the reverse roll method which seems a bit daunting for a beginner. I like your method of sticking the film to another window and completely removing the liner before placing the film onto the target window. Seems a lot more forgiving. Don’t think I’ll attempt it without some help though! Cheers.

[@InspireDIY]

Good on you Jack, thanks for the comment and all the best with your tinting project, it’s definitely easier with help👌 Kent

[@MelissaHaley-nu8xj]

Reverse roll takes a bit if practice, but is most definitely the way to go...no battles.

[@umaxen0048]

You did a great job. I'm really DREADING getting started. I have to use 2 pieces of tint for an extra wide window. AHHH!

[@InspireDIY]

Hey Umaxen, how did you get on with 2 pieces side by side? Am curious as to how it went. Cheers, Kent

[@kristyhoyt8047]

I should have researched more beforw purchasing..is a film different than a tint...i don't want to be committed to a permanent situation

[@malcolmlewis7057]

Brilliantly executed and very good explanation. Do you think this could be butted up to each other like wallpaper. I have a large window

[@InspireDIY]

Hey Malcolm, thanks for the lovely comment mate, very kind. I have never done a window in two pieces and would love to know if it could be done.. the nice straight machined edges should sit nicely together, and the edges around all my installed window films are sitting nice and flat so.. go for it and let us know how you get on. 🤙Kent

[@sarcasmo57]

Totally inspired by the DIY.

[@eshagh.ahmadi]

I like your work, you have a great channel

[@InspireDIY]

Thank you Eshagh, that’s very kind 🤙 Kent

[@Garage-1881]

Sub'd because the mad chillness you posses bro 🖤⚡️🖤

[@InspireDIY]

Cheers bud🤙 love it. Kent

[@outdooraussie6355]

G'day Kent. Great vid mate, so many thanks. Just wondering what % and colour tint you used in the vid... there seems so many to choose from! Cheers. 🍻

[@InspireDIY]

Hey Aussie, it was 15-30% VLT from memory, high number lets more light in (25% is very common) There is a link to the product I used here.. www.polyfilm.com.au/home-and-office-window-tinting And I prefer the silver colour, I feel the blue looks dated/discoloured Cheers. Kent

[@DevvysRoom]

Very helpful. Thank you!❤

[@mareehopper7993]

Hi Kent. Thanks for the shout out! So glad it actually works - I must have seen it somewhere (obviously!)...would you believe I still haven't tried to do it myself, it's on 'the list'

[@InspireDIY]

Well it worked well Maree, thanks for the comment 👍Kent

[@_tim]

I'm about to do my windows after being reassured by Kent's first vid and your hint has just made the workflow SO much easier.

[@wilheminaboone1107]

Outstanding video! Thank you!😊

[@InspireDIY]

Thanks Wilhelmina 🤙 Kent

[@chewar7537]

Great video, and thanks for sharing, will be doing my storm door this week. Hope it turns out as nice as your windows.

[@InspireDIY]

Thanks Cheri, that’s very kind ..best of luck with your door tinting👍 Kent

[@Rosiecat677]

Great video. About to attempt…. Wish me luck !!!!

[@InspireDIY]

Sorry for the late reply Rosie, thanks for the lovely comment. How did you get on with the install? Kent

[@PatriciaBrown1711]

Do you spray the windows with the shampoo and water to stick it down? Sorry if it sounds dumb just keeping myself right and wondering if it leaves streaky marks. Great video.Thanks in advance.

[@InspireDIY]

Hey Patricia, the shampoo/water mix is mainly there to help with repositioning and then removing bubbles with a squeegee. I’ve never attempted window tinting without it - but have found if I don’t spray enough then the film sticks straight away and is not forgiving at all. Best of luck, Kent

[@ReganousTheGrey]

Great video! Have a question... A local store has the roll sizes of 17.5 x 78.7 or 23.6 x 78.7. If My window is 45 inch tall 58 inch wide, which size roll of window film should I get? Thank you!

[@gillkilford1562]

Brilliant, thank you. Mission accomplished fantastic tips

[@InspireDIY]

Lovely comment gill, thank you😉 Kent

[@Judy-oi6ux]

What was the brand of of window privacy did ya use ....

[@InspireDIY]

Hey Judy, I went with Polyfilm brand in Ausy (no affiliation) www.polyfilm.com.au/home-and-office-window-tinting Or if you prefer buying from Amazon here is a link to similar products; Reflective window film for daytime privacy amzn.to/3m7OJ1O Best of luck👍 Kent

[@NotApplicaple]

Very helpful video- gonna give it a try. In America !

[@InspireDIY]

Hey ‘not applicable’, best of luck mate, let me know how you get on🤙 Kent

[@bernhard_derProtoTyp]

@2:24 mm tape measure! I love it! Here in Europe we only get cm. better than banana but Australia got it right!

[@InspireDIY]

Good on ya Bernhard, I’m sure your install looks better than you reckon😉 Cheers, Kent

[@fgjk18scb13x]

So glad that I watched this clip

[@InspireDIY]

Awesome, I hope it helped, Kent

[@lexic.7942]

Thank you 🎉 from NYC😊!

[@InspireDIY]

Cheers Lexic, you're welcome from Down Under. Kent

[@stasyskarpavicius789]

its good that you showing mistakes same as success!

[@InspireDIY]

Haha ..it’s because I make a lot of them😬 thanks for the lovely comment Stasys. Kent

[@Satchmo34586]

Bloody brilliant mate. Thanks, heaps

[@InspireDIY]

You’re most welcome John, thanks for the lovely comment 👍 Kent

[@michaelstrasbaugh1462]

will a hair dryer help tame the curl in the tint from being rolled up?

[@InspireDIY]

Hey Michael, I’m not sure about that as I haven’t had to do it. You are probably right though as a little heat can relax polyester (PET) products. Best of luck mate. Kent

[@ShereemariieUKAngelBased]

What size roll is that? Need it for my window but struggling to find with the correct size.

[@jacobberlanga5244]

ive learned if you get dirt or anything behind there i usually respray the back and get a plastic blade and gently scrape it off, works about 90%.

[@InspireDIY]

Yeah great suggestion Jacob, works a treat huh👌 cheers, Kent

[@MsPowerful12]

fabulous video and tips and tricks Kent as I will be doing this myself to save money did you purchase your tint from Bunnings or somewhere else

[@InspireDIY]

Hey Vanessa, I’m guessing you are in Oz used off your question (Bunnings) If so try these guys, this is what I used in this video www.polyfilm.com.au/home-and-office-window-tinting its mirror tint, minimal light lost, and good privacy and UV protection for carpets etc… or elsewhere in the world this is the same product amzn.to/3m7OJ1O best of luck, Kent

[@hoagnes]

Hi I want to know if this is effective to keep warmth as well?

[@InspireDIY]

Hey Hoagnes, great question.. I don’t know enough about window film and its heat transfer to answer, my guess would be minimal extra as it’s only a thin layer of polyethylene. A noticeable difference locking heat from the sun though 👌 let us know what you find out. Cheers, Kent

[@sonali.gokani]

Which is better to stop heat, frosted or sparkle frosted?

[@InspireDIY]

Hey Sonali, great question- sorry I don’t have the answer for you! If anyone reading this knows please advise👍 cheers, Kent

[@puntabachata]

Any thoughts on rolling the tint onto a cardboard tube (maybe a little more narrow than the window) and unrolling the film as I spray the window and separate the tint backing?

[@InspireDIY]

Hey Puntabachata.. you sound like a genius! I would love for you to try this idea out and let us know how it goes🤔 good on you mate. Kent

[@tinagodsey1023]

Is this a permanent film? thank you for the instructions

[@InspireDIY]

Hey Tina, yeah this particular film I used is a permanent one, if you want to check out a temporary / removable type, have a look at his vid.. kzbin.info/www/bejne/qYbak4KXZbBsrKM Cheers, Kent

[@kristificara2630]

Great video thank you for sharing

[@InspireDIY]

Hey Kristificara, thanks for the nice comment. how did you get on? Kent

[@happyvaper5748]

Perfect job. Peace and Love to you and your's Sir.

[@InspireDIY]

Thanks Happy, very kind👌 Kent

[@timfoote6919]

I absolutly love the Austrailian accent. #2 for me to the English Accent. Tops are English, Austrailian, Scottish/Irish.

[@InspireDIY]

Hey Tim, I don’t have an accent🤷‍♂️ I think everyone else does 😉 where in the world are you? Kent

[@respiess]

Where can I get that spray bottle.

[@Garage-1881]

Link to that badass spray bottle please and thanks 🖤⚡️🖤

[@InspireDIY]

Hey Garage, it’s a good one hey! amzn.to/3RhktSq Cheers mate🤙 Kent

[@Garage-1881]

@@InspireDIY I found the same one at Lowes locally! Never going back to a traditional spray bottle!

[@daver2964]

Issue with cc along base is that some older windows have a rubber seal. So be careful on scoring those.

[@InspireDIY]

Hey Daver, yeah I have learnt that the hard way too👍 great suggestion. Thanks, Kent

[@samg3660]

May I ask which type of film, static cling or static non-adhesive, you used?

[@InspireDIY]

Hey Sam, Reflective window film for daytime privacy amzn.to/3m7OJ1O in silver🤙 all the best

[@jpmty9062]

great guide!

[@InspireDIY]

cheers Jpmty, that's very kind to say, and glad it helped. Cheers, Kent

[@shaynemook]

Hi I attempted one widow and I've got lots of little bubbles despite 20 mins of pushing them out. Any ideas?

[@InspireDIY]

Hey shaynemook, has a squid at this👌 kzbin.info/www/bejne/p3S9q3tsrpeXoqcsi=4yIxrDG_46Rd3cSf Cheers, Kent

[@prolific314]

Excellent. Thank you

[@InspireDIY]

Thanks prolific🤙 Kent

[@kinggabriel-ft2zr]

Is it better to put the blade in between the card and water lining? Or the card in between the blade and water lining like in the video?

[@InspireDIY]

Hey kinggabriel, definitely have the card between the blade and the gasket (rubber seal) I learnt the hard way and cut too many slices off my rubbers😬. All the best mate. Kent

[@katetivey4001]

What % VLT film did you get from PolyTint? They range from 5% - 30% and im not sure what will be best

[@InspireDIY]

Hey Kate, 15-30% VLT from memory - reducing glare but still allows light. there is a link to the product I used here.. www.polyfilm.com.au/home-and-office-window-tinting The higher VLT percentage = more light transmission . Best of luck, Kent

[@Tamara_Jean]

Top video Kent, just wondering if you have any trouble with birds flying into the windows? I’ve been looking at ultraviolet window decals that are supposed to prevent window collisions, but I’m not sure if they work behind the mirror film, or if they only work behind the regular tint..

[@InspireDIY]

Hey Tamara, I only know from my limited experience, prior to tinting we had one collision, and since the mirror tint went on we’ve had one in a couple of years.. so, not sure if that means anything 💁🏻‍♂️ good luck mate, Kent

[@pwiberg7103]

Can you put this on vinyl windows?

[@InspireDIY]

Hey mate, yeah you can but bear in mind that the adhesive on the permanent films can interact with the plastic and become bubbled, and actually create a permanent bond, leaving you unable to remove the film in the future.. maybe look at other options like static cling film. Here’s a link 😉 amzn.to/3UFoYpT cheers, Kent

[@carmenj1578]

Staring at the sliding doors I need to do... any tips for the larger 'glass' please? Need to get the inside house temp much lower than 39 deg this year!

[@InspireDIY]

Hey Carmen, sorry for the late reply, How did you get on? Kent

[@นาตาชาบุญสร้างมอร์แกน]

thanks for the tips, how much heat you reduce

[@InspireDIY]

Hey mate, that's a great question, stay tuned to this channel as I have a video coming up with a measured temperature difference showing before and after. kzbin.info/door/YgHdCyiwS9Oy6Lp2r74POQ thanks, Kent

[@kennethlinkish4949]

what kind of spray bottle is that? Looks a lot nicer than a normal spray bottle

[@InspireDIY]

Hey Kenneth, I scored this beauty from the hardware store.. I was tired of cheap ones that stopped spraying or working properly and leaking just to be thrown away and needing replacement. A few extra bucks and it’s still going 👌 cheers, Kent

[@DragonGoten]

Es agua o algun pegamento especial el de tu aspersor

[@Thankful305]

Good job Sir!! BUT.... What a PIA!! 🤣

[@hilmoonr29]

can i use normal window squeegee for installation??

[@InspireDIY]

Hey hilmoonr, yeah you can, because I’m a bit clumsy I got one without any sharp edges or metal trim. It’s actually more firm than the typical window ones which I’ve found helps with application too. Best of luck mate.

[@hilmoonr29]

@@InspireDIY Thank you, I'll give it a try

[@aishasaeed1661]

Does baby shampoo work on snorkeling masks????

[@InspireDIY]

Hey Aisha, yeah it does for some reason… stops it from fogging up and gentle if any gets in your eyes👌 cheers, Kent

[@IM.SO.FLAWLESS]

Amazing Content 🌟

[@InspireDIY]

Thanks So Flawless, that’s very kind🤙Kent

[@jpjp9111]

Why do we avoid the ammonia-based sprays?

[@InspireDIY]

Hey JPJP, Great question, apparently the caustic nature of ammonia breaks down the adhesive used in window films. Cheers, Kent

[@jpjp9111]

@@InspireDIY Ahh. Thank you.

[@skidrenz]

Im just renting a place and its really hot and i want to install a tint like this one. Does this kind of tint easy to remove once my rent is over?

[@InspireDIY]

Hey SkidRenz, I would buy a non-adhesive or static cling type of film, they look just the same when installed but can peel off really easily when you don't want it anymore. see this vid kzbin.info/www/bejne/qYbak4KXZbBsrKM cheers, Kent

[@skidrenz]

@@InspireDIY thanks kent! Cheers!

[@douglaspaulsilva]

Do this tints give you and privacy at night when the lights are turn on?

[@InspireDIY]

Hey Douglas, no they don’t mate.. I haven’t seen any on the market that do, but if you came up with some that did you’d be a rich man🤙 Kent

[@lucyliu77]

What is the brand of window tint you used?

[@InspireDIY]

Hey Lucyliu, if you go to the ‘description’ section of this video you will see links to everything used in these videos👍 best of luck. Kent

[@caseyorourke3157]

Do you measure to the exact size of the window glass ??

[@InspireDIY]

Hey Casey, measure the space between verticals timber window sills (this would be glass plus aluminium/timber window frame), hope that makes sense. Kent

[@ahyungrocks5509]

Thank you!

[@InspireDIY]

You're welcome mate.. Kent

[@MsPowerful12]

what size roll did you purchase or did you measure first and the purchased to size

[@InspireDIY]

hey, yeah I measured the width, and then the total length of all windows and ordered roll/s to suit

[@MsPowerful12]

@@InspireDIY thank you

[@joannestevens8632]

Whats the ratio mix for the baby shampoo & water please.

[@InspireDIY]

20ml of baby shampoo : 1 ltr of water. (A big tablespoon : 4 cups) Best of luck mate👍 Kent

[@karenlauzon3258]

Why we are having trouble with buckling when trimming the film

[@InspireDIY]

Hey Karen, make sure you always have a sharp blade, and when trimming film to window size after install, don’t start your cut at the edge, rather work from the centre 👍 best of luck, Kent

[@karenlauzon3258]

@@InspireDIY Thank you for the tips.

[@karenlauzon3258]

@@InspireDIY Thank you for responding with your helpful tips

[@olivechopper]

Thanks

[@InspireDIY]

Giggidy🤙

[@MsPowerful12]

is that the charcoal or black coloured tint many thanks

[@InspireDIY]

Hey again, it's neither actually Vanessa, it's the '15% VLT Silver Mirror Reflective Glass Window Film' from 'Polyfilm' www.polyfilm.com.au/home-and-office-window-tinting its handy that you get to see how it looks after install hey (videoclip @ 7:30) Kent

[@MsPowerful12]

@@InspireDIY you did an amazing job and I will be doing mine before Summer as the heat in Perth is insane

[@InspireDIY]

@@MsPowerful12 good on you mate, let us know how you get on🤙 Kent

[@MsPowerful12]

@@InspireDIY will do

[@OhanaFilms]

I can relate to your snorkeling comment

[@InspireDIY]

Haha, love it👌 Kent

[@ImageAndArtNewYork]

I install the film , the part I don’t understand is why at night you can’t see the outside from inside is supposed to block the view from the outside , the daytime is fine , it blocks the view from the outside to inside , and I install the film just like the video, anybody can help me with this issues ?

[@InspireDIY]

Hey mate, unfortunately there is no film on the market that you can see out of during the day but blocks the view into the house when it’s dark out and lights are on. Kent

[@sherryroberts7716]

Can another type of soap be used instead of baby shampoo. I don't want to have to buy it and never use it again (I have no babies). I have tons of other shampoos, though.

[@InspireDIY]

Hey Sherry, yeah.. go for it! Just pick the gentlest one - least ‘detergent’ like, no dyes and perfumes👌 all the best. Kent

[@sherryroberts7716]

@@InspireDIY You're the sweetest! You from Downunder? L0ove your "accent"

[@InspireDIY]

Haha, thank you 🙂

[@kornstar1988]

I really struggled with the edges of the glass. Even though there wasn’t any parts pushing against the edges. Somehow the water just wouldn’t leave the edges.

[@InspireDIY]

Hey Kornstar, how did you get on 1 week later.. is it sitting nice and flat now? Kent

[@1CatSitter]

@@InspireDIYhey man which tint exactly did you use in this video?

[@edgararcega3046]

Alright boys and girls. Let's nitpick at how he messed up in this video nowhmjkl jk. Simple enough instructions and looks great

[@MelaniePero-u8d]

I'm soooooo confused, in my paper instructions nowhere (or in your video) does it say anything about soapy water , paper instructions don't say anything about scraping windows...only says spray with water and apply to window, peel film...im frustrated...even your instructions don't explain it well

[@usmc2msu213]

MAKE SURE YOU USE THE CORRECT SIDE! Don’t be like me! “Boy that sure is clear, almost like there’s nothing on at all!”

[@InspireDIY]

Sorry.. I had to laugh at your expense 😂 that’s something I would do. Great comment mate 👌cheers, Kent