No Other Miter Saw Has This

[@johnturk8622]

Welcome back! Lots of us here have missed your intelligent videos. Hope to see more.

[@middletonwoodworks]

Can I buy the orange shroud somewhere?😂

[@mrniusi11]

he is working on it. He will make it available after his prototyping is complete.

[@TNRonin]

Dude it was a joke! ​@@mrniusi11

[@jelias9247]

You can’t buy that one!

[@BobBob-eh5sb]

Well it’s a good thing that I can’t buy that one, because then I’d have to buy the matching miter saw😅.

[@FullCircleTravis]

Make one.

[@richpeggyfranks490]

Welcome back. Hope all is well. Continued progress on miter saw dust collection design will eventually end up with manufacturers jumping on the bandwagon. Good to see great minds like you and Shop Nation in the mix. Evolution, not revolution. Thx.

[@kimberlyprice5046]

Next version is going to be 200% dust collection. Using your miter is actually going to collect dust from your handheld router too.

[@richpeggyfranks490]

@@kimberlyprice5046 Sounds like a promise from a politician. Haha.

[@InspireWoodcraft]

@kimberlyprice5046 That's currently under development. 😆

[@evans_workshop]

Missed you Jodi! Welcome back!

[@Brian-tb1zs]

This channel is one of the few that are outstanding on KZbin

[@bhboyle]

Hey Jodi. It is wonderful to see your return to KZbin. You were missed my freind. Cheers.

[@gregmize01]

This is the best non-commercial-COMMERCIAL I've ever seen!!!! Good to see you back!

[@MCsCreations]

Brilliant, dude! 😃 It's great to see you back! Stay safe there with your family! 🖖😊

[@lukefitt56]

Great idea! I think one of my favorite things about the internet is people collaborating to make something or to help give ideas to improve it. This gives me some ideas on how to help improve dust collection on a different brand miter saw.

[@BrenQ99]

God, am I glad to see you back, Jodi! You have been one of my best teachers.

[@steveferguson1232]

Welcome back to KZbin Jodi. Missed you and was worried about you as well. Since we chatted on instagram, I understand and now see what you’ve been dedicating your time to. Well worth it and congratulations. Also giving shout outs to the other two guys working on dust collection ideas. That’s first class.

[@mattmayes599]

Glad to see a new video from you... Hope y'all are doing good 👍🏻

[@stumblingapostle]

So good to hear from you brother! Was concerned there might have been something that went sideways. Really appreciate the content you put out here!

[@chrismoore6359]

Thanks for the video. Great to have you back and hope all is well.

[@kevenmelara227]

thank you to all the users like yourself who are doing this work. It’s unbelievable and embarrassing that dewalt, makita, bosch, etc have not done this work themselves.

[@ansonchristiansr9596]

The original DW780 DeWalt dust chute was an absolute joke. The Rousseau hood worked to catch a lot sawdust for my vacuum, but I still had a LOT of airborne dust. Then I purchased a dust chute from Travis at Shop Nation which was a large improvement over the so called DeWalt dust chute, but still had lots of airborne dust. Then I purchased your dust collection throat plate and now collect the remaining dust from the blade area. I honestly think that with my Bosch Dust Extractor, Shop Nation dust chute and Inspire Woodcraft dust collection throat plate that the dust problem is over to the point that I don’t have to wear a respirator. I’m very thankful to you and Travis for taking care of such a dangerous breathing hazard…..saw dust. SUPER EASY to install. Thank you Jodee for taking the time to research and develop a throat plate dust collector that plays very well with Travis’ dust chute design!!!!

[@vincent7543]

Thanks for talking about the other parts used! Big help.

[@davidbarnett1755]

Great to see you back, I have missed your videos, excited about your new invention for my 780 saw

[@colinwilson8747]

As many of the comments are already saying "Great to see you back" AND also to see you ate still innovating dust collection options

[@skipanardoross6805]

Good to see you back. Been interested in your dust collection endeavor from the beginning.

[@nialstewart8263]

Good to see you back 👍

[@benshanks953]

Welcome back, glad to see you are still around.

[@soujrnr]

I was so excited to find your KZbin channel about this! I've had the 779 (which I love!!) for about 2-1/2 years now, and it is the biggest source of all of my sawdust woes. I'm going to order one of these post-haste!! Thanks for such a cool and innovative design!! I look forward to checking out more of your videos!

[@crashkg]

Glad to see you are back on KZbin. Looking forward to seeing more inspirational videos from you.

[@andrewbrown8148]

THAT looks like a winner~! I've been watching Travis @ ShopNation for years and his dust collection efforts appear to be doing really well. I have an old DeWalt DW705 that I've used for years, but I'm next week I'll pick up the Bosch Axial-glide CMS that I ordered. I'll be keeping an eye on your progress as well. 😉

[@johndesormier8099]

Glad to see you back. I have always enjoyed your content.

[@theelmagoo]

I wanted this when you released the first version for non sliders, thank you for creating this!!!!!!!!!

[@chalmagean]

Great video. I'd love to see one on mitter saws. I've been thinking about buying one for cross cutting (Dewalt 780) but I'm one the fence since many people say it's not accurate.

[@skf957]

Where can I buy the orange thing, and will it fit my Festool sander?

[@petenelson8136]

Love the idea. I purchased the dust collector for my Hercules 12" double-bevel sliding compound miter saw from shop nation and it's awesome. But, like you mentioned I still get a lot of dust from the throat plate. The DeWalt miter saw and the Hercules are very similar, will your throat plate dust collection system work on it? If so I'm getting one! Oh yea, and welcome back, always love to see your insight on woodworking. I stopped woodworking for about 30 years, and now that I'm retired I've built a house with a dedicated 14'x32' shop and getting back into it, so learning what's new and dusting off my old skills is a constant learning process.

[@InspireWoodcraft]

@petenelson8136 If I remember correctly, the throat plate itself is one of the few differences between them, and it's a different shape. That leads me to believe it probably looks different under it too.

[@Ford-ek7qe]

Glad you are back. I've learned a lot from you.

[@stevehubner560]

Good see your back, hopefully this will take off my Makita slide saw is disgusting for dust collection

[@InspireWoodcraft]

@stevehubner560 Which model?

[@stevehubner560]

@@InspireWoodcraft Makita 260mm compound mitre saw LS1019

[@BubbaLeroy]

Hey Jodi, nice work! Glad to see you’re back!

[@ccraw235]

saw this video pop up in my feed and assumed it was old. glad to see it is new! I hate the dust cloud my miter saw makes.

[@mikedurkee7296]

As others have said already... good to see you back!

[@alpaca6920]

I have told a few friends to watch you great tips videos and then you disappeared. Great to see you back

[@lgconf]

Glad to see you're back!

[@deek3048]

Wondered what happened. Missed your very clear, very instructional ideas! Hope there's more to come from this engineer!

[@billymurphy3]

He’s back! Good to see you in my recommended!

[@jayempress4203]

It's about time you showed up with a vid! Good jog on the dust collection we can't buy! If I can't buy the one you showed, do you have others that we CAN buy??🤣

[@hansangb]

Welcome back, Jodee. Hope that cease and desist didn't become too much of a hassle. What a bummer, I was really looking forward to it.

[@InspireWoodcraft]

@hansangb Man, I still have a box with those sitting in the shop. Major bummer.

[@Livingdivergent]

Brilliant!!! Thus proving that group share and think works very well among smart minds! Well done!

[@chuvvyyk]

Very inspiring! 3D printers have opened up a whole new world of dust collection attachments

[@surronzak8154]

Amazing 3d printing work and design, I love it

[@decosse01]

Looks REALLY good! PLEASE (pretty please?) consider doing this for the 718 also? It's a pain that DW changed the shape of the insert. Hopefully this would be a relatively simple change to your 3D Print design to accomodate the different shape at the ends of the insert.

[@InspireWoodcraft]

@decosse01 I might try to get one in the shop at some point. But no guarantees!!

[@Dandroid61]

Glad you're back Jodee! For me, you are one of the smartest woodworkers on KZbin.

[@grahamhughes9971]

Yay welcome back Man.

[@robertwittman9793]

Got the Shop Nation one and it works well. I still get an accumulation under the saw because my zero clearance plate allows the blade to penetrate all the way through instead of encapsulating it. I wonder if there is enough room underneath the throat plate to have a collection point. That way the whole kerf in the throat plate would be sucking?

[@dereknykamp1208]

Love it! But what happens to the insert when you cut at a 45 degree bevel?

[@InspireWoodcraft]

@dereknykamp It gets destroyed! All of it though. Not just the insert. 😆

[@ricolarson]

Outstanding idea! If I had this saw I would buy it today.

[@InspireWoodcraft]

@ricolarson I mean, just go buy the saw. 😆

[@jasonritzman7622]

So what happens to this contraption when the saw is beveled over?

[@w9jim]

Nice to see you back. That small amount of dust doesn't bother me.

[@HerselLawson]

Great Idea. I would like to see this come out for my Ridgid Sliding Miter Saw

[@JackbenchWoodworking]

That's brilliant!

[@howdog007]

Looks like a fantastic solution. Any chance you've got one coming for the dewalt 717? 😊

[@InspireWoodcraft]

@howdog007 Unfortunately, probably not.

[@frankhagar4651]

Looks great, missed the channel, hope all is good

[@bwielgus]

I was really excited by this and loved the ingenuity! But only shipping in Canada and the US?

[@InspireWoodcraft]

@bwielus International shipping gets kind of crazy. It takes so long to fill out customs forms and stand in line. Even Canada orders kill me sometimes. We are working on it though. Just need a way to streamline it and make it easier and less time consuming.

[@bwielgus]

That makes sense. It’s frustrating for you and for everyone :) let’s keep our fingers crossed

[@tangodown2721]

Awesome! Innovation continues

[@mmoncur]

HE'S BACK! 😀

[@Sebastopolmark]

That's one of the best products I CAN'T BUY in a long time! !! !!!

[@a-carpenter9229]

I have a Dewalt DWS779 and got the shop nation dust shroud but for some reason it doesn't work. The saw still sprays dust everywhere still and I feel like the original worked better. I'm gonna check yours out and may order the set

[@InspireWoodcraft]

@a-carpenter9229 Honestly it could be that this throat plate makes a huge difference in the performance of the Shop Nation one. I have no idea how my prototype compares to Travis's version as far as performance goes, but I know it made quite the difference for mine.

[@inspectorgadget6510]

Are you going to make one for the older 12” corded Milwaukee miter saws?

[@InspireWoodcraft]

@inspectorgadget6510 Most likely not. I do have a few other saws on a list if I keep making them for other models, but not too many of the older saws.

[@duaynenaugle4186]

How does it work with compound bevels

[@marc82much]

Pre-order only? That is OK with me, well worth waiting for, but do you even have a guestimate as to when it might really be available? Brilliant work BTW.

[@InspireWoodcraft]

@marc82much Thanks!! I started shipping them out a week or so ago, but we had to do a pre-order because we didn't know how popular it would be, and in the event that it was really popular, we have to be able to keep up with the demand. These take a long time to make so it made more sense to have it on pre-order than have folks mad because they didn't get their stuff right away. Turns out it has been pretty popular, at least over the last couple of days. I haven't had a chance to see how many were ordered, but for now I would say orders are a couple of weeks out from when you order it.

[@TonyMcCartney]

Do you remove it for bevel cuts? Bummer.

[@InspireWoodcraft]

@TonyMcCartney Yeah no bevels cuts, unfortunately.

[@karlriley1314]

So, what do you do when you cut a 45 bevel??

[@InspireWoodcraft]

@karriley You don't.

[@WoodworkingWarrior]

Great idea man! Are you gonna make them for other miter saws like the HF clone of that Dewalt?

[@Icantball67]

I’m just curious if anyone has used any of these dust collector attachments while making bevel cuts? I do use mitres and bevels a lot at my work and all I see is straight cuts, mitres and the testing of boards laid flat instead of upright base cutting cutting crown upside down on a set of stops.

[@InspireWoodcraft]

@Icantball67 You can't do bevels with these throat plates, unfortunately. It will get destroyed. I've tried to make ones that would allow bevel cutting, but it just isn't effective.

[@Handleyman]

That’s pretty impressive!!

[@ZunarZulfiqar]

That solution seems like it's work for my Gen 1 flexvolt Dewalt saw as well. Too bad I once had kickback so bad on it that the throat plate and material was fired down so hard that it shattered the metal ledge under the throat plate where the screws go to attach it. Thus, I can no longer screw in any throat plate.

[@InspireWoodcraft]

@ZunarZulfiqar That sounds terrifying!!

[@troycarpenter3675]

12” dewalt mitersaw is hands down the best boat anchor ever made!

[@chasbird364]

Does it work at 45 degrees?

[@ron1martens]

Nice. My kapex 120 makes a lot of dust also.

[@InspireWoodcraft]

@ron1martens I hear that a lot.

[@MAKEITSF]

You telling me I can’t buy it just makes me want to buy it even more, even though I don’t even own a dewalt sliding miter saw. Now I need to buy the saw.

[@rollovaughan]

The Elu p274 sliding mitre saw had three point dust extraction. Something modern saws don’t do forsome reason.

[@deek3048]

If I order the throat plate but don't have an after market product for the tube will it still work as intended or do I have to wait till you market the orange thingy?

[@shinrah4772]

Funny, I used to have an old ElektraBeckum mitersaw from the early 90's, a German brand that no loger exists, and guess what, that Saw actually was collecting dust from below and at the Sawblade too. Havn't seen that concept reappear on other saws until now :)

[@mrmahoney2577]

Great product. Can I buy that

[@mattrinne]

My only concern would be that tiny hose getting plugged. Glad you made it from small vinyl hose readily available at any home store! Manufacturers would have made it some odd size so folks would be required to get it from them for more 🤑

[@InspireWoodcraft]

@mattrinne So true! Everyone has to have proprietary systems! Throughout all my testing, the hose has not gotten plugged. And actually, I reduced its size from my original designs. If you think about it, since you have a zero clearance insert, nothing wider than the blade should be entering the hose anyway. Although I suppose if you were cutting wet/sappy material it's possible. As a woodworker, this is not something that I deal with.

[@daveklassen924]

Do you know if it will fit the dewalt flexvolt saw?

[@timothywhite6532]

Jodi, ... where do we get that dust shroud in DeWalt Yellow?

[@InspireWoodcraft]

@timothywhite6532 I mean, that's a valid question. I said you couldn't buy the orange one. I didn't say anything about a yellow one! 😆

[@KenCharlesTheGreat]

Very nice !

[@ocotuchodzi]

Any chance for a link for this orange dust collection thingy ? ;)

[@jronmanbuilds]

I noticed in the video some debris got stuck in the clear hose. Will you be attempting to try and fix this issue? Also will it become available for other saws?

[@InspireWoodcraft]

@jronmanbuilds That little sliver got sucked up on the next cut. I still haven't had any issues with clogging, but because some folks were concerned about it, I redesigned the ports to accept 3/4 OD, 5/8 ID hose that can easily be purchased at most hardware stores. As for other saws, possibly. I have a list of requests, I'll put it that way. The problem that I'm running into is that manufacturers make subtle changes over time and sometimes those changes can mess up fitment. I'm actually running into that right now on an older 780.

[@pj6366]

Jodi! Where you been dude?

[@KizenEnterprise]

Will your dust collection work with my zero clearance Kizen Miter Fence?

[@InspireWoodcraft]

@KizenEnterprise I mean, the only way to know for sure is if you send me one to try out. 😀 Been a big fan of your work for a long time! As for MY dust collection parts, as far as I can tell it will absolutely work. There is nothing to get in the way of the fence whatsoever, even at either full miter.

[@glencrandall7051]

OK you fixed it for your saw. When are you going to fix it for my saw?🙂🙂

[@InspireWoodcraft]

@glencrandall Ha! Which saw?

[@glencrandall8334]

Dewalt DW705 Compound Miter Saw

[@nickzigrang2664]

When is the orange shroud available? Can I get one sooner if it's red or blue?

[@perry2180]

Any way of getting this in Australia?

[@peternatoli2555]

Hello. Great work good person. I have been trying to tell the power tool manufacturers for years exactly what you have done here. With simple observation I even shut down totally the dust from a plunge saw on a rail and wrote an article including this in a British magazine. To this date no manufacturer has copied it. In this time how many people have choked to death on silica and wood dust ? The fine "resaw" dust exiting the throat plate at the back is the most dangerous as it is fine. Good luck and good judgement in all your endeavours.

[@raulc398]

Will it fit the Festool kapex?

[@alirionoguera1897]

WOW perfecto, excelente

[@spectrumwoodworks]

NICE Jodi!!!!!

[@zach58829]

You should check out the Hilti SM 60 Miter Saw that released this month

[@pbhogan]

Can you make 3D print files available for purchase for this? I have an **ahem** tendency to break things. I've printed the Shop Nation dust collection chute several times now due to breakage (my own fault). Also, it's fun to get a little creative with colors if you have a 3D printer.

[@InspireWoodcraft]

@pbhogan I get it! I don't think I will have the print files available for this setup like I did the others. At least not until I can figure out how to bake branding into it. Too many knuckleheads buying files and then producing/selling themselves like it's their own work. It's a really bad problem right now.

[@pbhogan]

@@InspireWoodcraft Knuckleheads are always why we can't have nice things. 😤

[@MHoWsc]

This looks brilliant but I won’t buy anything that causes me to lose functionality of the primary reason I bought this saw - bevel and compound cuts. Hoping you continue working on finding a solution to the dust issues that will allow the use of the double bevel function of this saw.

[@thomasspalding9632]

What adapter do I need to connect your device to Shop Nation's connector?

[@InspireWoodcraft]

@thomasspalding9632 In theory you won't need any adapter. But apparently they changed the size of their hose cuffs recently and they are no longer 1-5/8". I have been including a reducer sleeve preinstalled in my vac adapter to help take up the gap. If you have one of the "older" SN units it should fit just fine without trouble.

[@thomasspalding9632]

@@InspireWoodcraft Thank you for your response. Unfortunately, I do no have my invoice number; however, the kit you provided tome does not have the reducer that you mentioned in your more recent video. I cannot connect your kit to my Shop Nation adapter because they are the same size. I assume the reducer will fix this problem. My address is 904 Pebble Beach Road, Beaumont, Ca 92223. Can you please provide the reducer. Thank you for your consideration.

[@InspireWoodcraft]

@@thomasspalding9632 I am mailing you one today. There has been some confusion from a few folks, so just to clarify: This sleeve is meant to be installed directly into the vacuum adapter from our kit and then the SN hose cuff, without any adapter that may have been supplied by them, should be plugged into the sleeve. Again, it is not a guaranteed fit, as I don't own one of the SN units to test it on, but it should get you close if anything. Unfortunately, we don't have any control over any other manufacturer's specs, nor do we make parts intended to fit any specific manufacturer.

[@thomasspalding9632]

Thank you very much!

[@Dakotahvoet]

I have very selfishly missed your videos for the last year and have been checking in regularly, waiting for my next "super obvious/accessible thing and or tip that you never thought of" video to hit my subscriptions. Glad to see you're back, happy so see that you found a focus that you have a passion for and an area you can innovate and make a difference in.

[@IamMatthewHarrison]

Now make one for 12in Bosch please 🙏🏻

[@flboy77]

Where can I buy the orange shroud? 😂 In all seriousness, awesome solution and awesome video.

[@markusnilsson3237]

Does this fit dws727. Would love to have that on my mitersaw

[@InspireWoodcraft]

@markusnilsson3237 To my knowledge, it will only fit the DWS779 and DWS780.