Changes Have Been Made / DeWALT Slider Dust Collection Update

[@Andyloveswood]

Really glad to see some new videos! I had worried that you had stopped permanently. You do a great job both of working out great techniques, and of explaining them clearly. Please keep it coming!

[@InspireWoodcraft]

@andyboybennett Thank you!!

[@erickdanielsson6710]

Very Happy to see you back on KZbin.... THANKS!!!

[@stevetaylor4602]

received my kit the other day. What I received didn't have the ability to suck the dust from underneath the saw, but customer service at Inspire Woodcraft said it isn't necessary. Is that true?

[@InspireWoodcraft]

@stevetaylor4602 Depends on what saw you are outfitting. The only saws that need vacuum assist are sliding saws because the saw head, and the dust shoot, moves away from the rear of the throat plate when you cut. The non-slider saws don’t need it because the “dust shoot” never moves from the one place. So the dust just flys into the shoot naturally.

[@soujrnr]

I just received my dust collection system from you in the mail yesterday. I installed it this morning. Mine did not have the adapter you are showing, so I was unable to connect the smaller plastic part you are holding to my Dewalt table saw. I had to jury rig the old dust bag collar and use some E-6000 to get it all to fit together, but it's functional now. I love the design, but I hate these oddball sizes on some of these power tools. Thanks for a great product!! Oh, I have the Dewalt DWS779 miter saw.

[@InspireWoodcraft]

@soujrnr The sleeve should have been preinstalled into the vac adapter! If you think it would help and you need it, please let me know and I will send one out to you. Completely agree! I don't know how hose and accessory sizes haven't been standardized by now.

[@soujrnr]

@@InspireWoodcraft - Thank you. I'll take a look and see if I just happened to miss it somehow. I love this thing, though. I'm excited to start my new project tomorrow!! That miter saw generates insane amounts of sawdust even with my shop vac attached, but now with your designed jig, I'm looking forward to more building and less cleaning! Thanks for your speedy response as well!!

[@MCsCreations]

Fantastic design, dude! Thanks a bunch! 😊 Stay safe there with your family! 🖖😊

[@maximusmagni1]

Are you going to make a version for the Bosch 12”?

[@InspireWoodcraft]

@maximusmagni Let’s just say it really high on the list.🤞

[@deek3048]

If I order the throat plate but don't have an after market product for the tube will it still work as intended with the original tube or do I have to wait till you market the orange thingy available?

[@FernandoM-8]

Any update on the issue between the different types? I’m also crossing fingers that you’ll put out the boot to attach this one to

[@InspireWoodcraft]

@FernandoM-8 I haven't got to the bottom of it yet. The "boot" part is a head-scratcher. A lot of claims of hard plastic ones being destroyed with flying offcuts, so I want to make it out of something more durable. And I'm trying to figure out how to make it work with all sizes of materials.

[@tallpaull9367]

I have a DW717, any compatibility?

[@InspireWoodcraft]

@tallpaul9367 I don't think so.

[@erickdanielsson6710]

I remember that you moved to a new shop a bit ago. V/Nice work on the cabinets and work area...

[@leonardbartholomew5021]

any plans to design one for the DCS361B?

[@musicbymark]

I just bought the DW s780 and haven't tried it yet. Your links were a bit unclear, numerous products showing up for different models and different saws. How much is a complete setup for my DWS780? Looks like most of those links were around 50 bucks? What do I need to buy/add to the system to incorporate your product? How far backed up are you/as of today, what is the probable delivery wait time? Great job being so innovative and original!

[@InspireWoodcraft]

@musicbymark Oh man! I've worked really hard to organize everything on the website so that it's easily searchable and easy to come back to. I might have to revisit my layout! At any rate, the kit for the DWS780 is the first thing you see when you go on the website, and I believe it is linked below in this videos description as well. Either way, here's a direct link as well. inspirewoodcraft.com/products/dewalt-dws779-780-dust-collection-upgrade-kit As of typing this I am around 1-2 weeks out to ship. Everything you need in order to be up and running is included in the kit, but we do not supply the behind-the-blade dust attachments as of right now. For that, I recommend looking at Benchtop Woodworks and Shop Nation.

[@RikoRey92]

@inspirewoodcraft Can you make a throat plate like that for the DCS781... I dont care if it has the suction feature, I mainly wanted because of the zero clearance tape compatibility. And if you can make one for the table saw DCS7485 I will buy IMMEDIATELY

[@MP99.]

You happen to have anything in the works for the Gen 2 flexvolt saw?

[@peterkappelhof151]

This is a great solution. Any chance you might develop a similar solution for the Bosch Axial Glide GCM12SD? Earlier this year I purchased and installed the dust chute for the saw made by Shop Nation and really like it. I added an elbow with a female Bosch Quick Connect on one end to accept a standard Bosch hose. I had that custom made by John at Krayft on ETSY. He now offers them standard on his ETSY site. Your dust collection throat plate would be a great addition to the dust collection on my saw.

[@InspireWoodcraft]

@@peterkappelhof151 Actually, YES! I have one in the shop right now. It’s still in the box as of right now but it’s coming!

[@peterkappelhof151]

@@InspireWoodcraft Good news! The Shop Nation hose that comes off of their dust chute is 1-1/4" ID and 1-1/2" OD, plus I have the special left hand thread hose fitting from Krayft that takes the Bosch Quick Connect hose. I realize that you can't make stuff to fit each person's set up, but I'm wondering if there is a way to send you a photo or two just for information.

[@InspireWoodcraft]

@@peterkappelhof151 Shoot me an email at [e-mail] and we can chat. I am super slammed the next couple of days so if I don't respond right away, be patient with me. Ha!

[@aaronblackford981]

Awesome job. Once you get head deep into it, don’t forget there many friends that have larger print farms than you, maybe they can help take care of orders above 2 a day until you are fully up for it, but don’t forget, that demand for this will slow. Btw. Dw779 does have at least one really important recall notice on it. They just send you replacement parts. I just got mine. Broke first time using it. It was made 4 yrs ago. Bought brand new two months ago from Lowe’s. No clue issues until another channel mentioned it about a different product

[@InspireWoodcraft]

@aaronblackford981 Yes some of them have a recall on the rear guard. Interestingly enough though, some folks have had the new part sent to them and it just the same part as the one that was recalled. Very strange. I have looked into having them printed elsewhere, but the cost has not been worth it so far. I make more than two a day. Probably average about 5 or so. So far, so good. I just need to get a few more printers.

[@aaronblackford981]

@@InspireWoodcraft interesting. I am still dealing with them on the recall or trying to as the recalled part broke something else, aka, lower blade guard into my my face but I am just trying to get them to send me replacement for the lower guard

[@calebklyne6406]

I would love this for the 10" saw

[@johnedwards6939]

You make comment several times of an “aftermarket” dust collection part that is attached to the saw itself. Your throat plate system would then attach to that aftermarket part. I’ve looked on the web site, through the comments on this video but have not found any reference to this aftermarket part. Would really like to place an order but it seems I’m missing a part you do not offer. Could you please advise us what to do or buy ?

[@InspireWoodcraft]

@johnedwards6939 I recommend checking out Shop Nation and Benchtop Woodworks for the behind-the-blade unit. Thise are the two most popular on the market right now. The kit that I offer is essentially complimenting those units. Hope that helps!

[@jasonwiech5226]

Great work, love the innovation. Just 🙏 and begging that you come out with a version for my 12 inch Bosch glide 😊

[@InspireWoodcraft]

@jasonwiech5226 It’s on the short list!

[@toadsprocket7598]

your not worried about accidents or litigation? I almost lost an eye to the dust collection piece that got recalled with those same units. luckily goggles were on.

[@InspireWoodcraft]

@taodsprocket7598 Nope! There isn't anything in my setup that could poke an eye out.

[@jppianoguy]

@@InspireWoodcraft i love your stuff, just be sure you have insurance. People will sue everyone and everything these days. Even if it had nothing to do with your product.

[@danelooman8080]

Any plans for Ryobi TSS102L 10" Sliding Miter Saw?

[@InspireWoodcraft]

@danelooman8080 No plans as of right now, unfortunately.

[@richragan4810]

Jody do you make anything for the DeWalt 706? I have an older version of the 716 I guess? Thank you!

[@InspireWoodcraft]

@richragan4810 Yes and no. I have not made anything specifically for the 706, but I have had people say that it's easy to make the parts for the DW716 work. Look at the reviews here for the Dust Collection Throat Plate for the DW716. Might help. inspirewoodcraft.com/products/zero-clearance-w-dust-collection-dewalt-dw716 I think there might be similar reviews on Etsy as well, but I can't remember.

[@freemancustomstairs]

Need Makita 12” 40v slider please!!

[@julianugentarchitect]

Do you think this will work for the older DW718?

[@InspireWoodcraft]

@julianugentarchitect If I remember correctly the 718 has a different style throat plate, so I don't think so.

[@elijahhiers8726]

How can I get my hands on that little reduction sleeve? Just recently got both yours and the shop nation and it's definitely a loose fit

[@InspireWoodcraft]

@elijahiers8726 I got you! Just shoot me your order number so I can look up your address and I'll send you one. You can just reply here or send an email if you'd rather.

[@timothywhite6532]

@InspireWoodcraft ... have you, or are you, making changes to accommodate Model 779 - Type 21 saws?

[@InspireWoodcraft]

@timothywhite6532 I'm still trying to get to the bottom of this. I need to get one in the shop to figure it out, I think. It turns out there are basically three versions of the plastic trough under there. If it could easily be removed, that would solve everything. But that doesn't seem to be an option either.

[@timothywhite6532]

​@@InspireWoodcraftWhen I first realized it wouldn't fit I thought I would simply grind down the offending protrusion. If I'm able to get to that any time soon, I'll document it & report back to you.

[@InspireWoodcraft]

@timothywhite6532 I’m not even joking, but yesterday I talked to a customer that said they “took out three screws and cut the rest out with garden shears”. 😆 I’m waiting to hear back from her for more information. My thought was also to just use the blade to grind down the rectangle block in there. But I don’t know how well it fits after you do that. Apparently removal is the way to go.

[@Personalized_Workshop]

Awesome 😎, so you have been busy in the shop, makes sense now. I’ll admit I was a little worried. Good stuff 👍🏼. I couldn’t help but wonder what the propane was for throughout the whole video.

[@InspireWoodcraft]

@Personalized_Workshop I'm alive! Ha! I use the propane to burn away any hairs or stringing on 3D printed parts. It also helps smooth over and blend any place where I might need to file or shape something. And I use it to get rid of white stress marks that form on the bottom of prints.

[@tighecrovetti2844]

Love the Baseballism tee!

[@InspireWoodcraft]

@tightecrovetti2844 My favorite!

[@domenicprinzivalli8318]

Nice job! Just a thought…if you don’t print the blade slot into the throat plate and let the user cut it when they install it, you could effectively make this a zero clearance plate at the same time and reduce tear out on the bottom.

[@SilverFox-1212]

Until you make a 45 degree cut

[@domenicprinzivalli8318]

@@SilverFox-1212 Excellent point

[@aaronblackford981]

Also higher cost to make if he made full throat which would be best overall but no one prints at 100% infill if you even can with any equipment, which would cause drag unknown as all prints just has the small failure somewhere. Doesn’t effect the look but add dust and vacuum. This complicated problem to fix becomes complex.

[@InspireWoodcraft]

@domenicprinzivalli8318 It already has zero-clearance built in! There is a recess on the top side that accepts PVC zero-clearance tape from FastCap. (One piece is sent in each kit.) Then you can replace the zero-clearance as necessary. If I made it solid so that people could cut their own slot, then when it wore out, they would have to buy a whole new kit.

[@InspireWoodcraft]

@SilverFox-1212 Most woodworkers don't use the bevel on their saws so it's mostly a non-issue. And if they do need it for some reason, they can just swap it out with the factory plate easily enough.

[@Workshop-of-Allsorts]

Would these work on the DW717 im based in the uk, they seem to be fairly popular over here but the dust extraction is poop ! Love your channel 👍

[@InspireWoodcraft]

@Workshop-of-Allsorts Unfortunately I don’t think anything I have will work.

[@calebklyne6406]

@@Workshop-of-Allsorts love my DW717 but the extraction is crap and there is really no external support for this saw

[@Workshop-of-Allsorts]

@@calebklyne6406 same as, love the saw but the extraction is 💩 I was looking at etsy, few possible options on there....

[@jeffdamon5419]

Would one of these work on the DW735, the 13"? I love my saw, but the dust is an issue for sure. Thanks.

[@InspireWoodcraft]

@jeffdamon5419 The 735 is a planer.

[@nialstewart8263]

@@InspireWoodcraft That might be why dust is an issue? 😬

[@jeffdamon5419]

@@InspireWoodcraft Yep, you are correct. I took pix of my tools for inventory purposes to include the serial numbers. I looked at the wrong "yellow" picture and completely spaced that it was the planer. 😑 My saw is the DW708. The OD of the hose port is 1 9/16".

[@InspireWoodcraft]

@@jeffdamon5419 Ahh. Unfortunately I don't think it'll fit the 708.

[@jeffdamon5419]

@@InspireWoodcraft I kind of thought so. OK, thanks anyway. Really enjoy your videos.

[@SomeDudeOnline]

Do you have a link for the after market dust extraction you’ve got there? I don’t see a link for it in the description but I may be overlooking it.

[@InspireWoodcraft]

@SomeDudeOnline I think everything we have available is linked in the video description.

[@SomeDudeOnline]

@@InspireWoodcraft I was referring to the part you have on your saw in the video which you said you don’t offer. I would like to get something like that in addition to your dust collection setup and was hoping you could share a link to where you got yours.

[@rodneyliber]

Just bought one. Cant want to get it!

[@badboyboydc6779]

For thosse of us who have them, where can we write a review?

[@InspireWoodcraft]

@badboyboydc6779 I think after a while an email is sent from our website that asks if you’d be kind enough to leave a review. Doing it through the email adds a “verified” badge so that readers know it’s from someone who actually purchased something and not just someone trying to make up good reviews.

[@badboyboydc6779]

@@InspireWoodcraft Found it. Got filtered. I would have missed it if you didn't explain. Thanks.

[@cutemalegymnat]

I was wondering why you weren't putting out videos in the last year

[@InspireWoodcraft]

@cutemalegymnat There's been a few things that have kept me away. But I'm back!

[@raulc398]

Festool Kapex!!!!

[@InspireWoodcraft]

@raulc398 It's on the list!

[@paulfrizzell31]

👍great video

[@rickculpepper709]

You were on to something…what happened ?

[@InspireWoodcraft]

@rickculpepper709 ?

[@AnBar558]

И какой смысл видео с ограниченным доступом?

[@InspireWoodcraft]

@AaBar558 What is a restricted video?

[@AnBar558]

​@@InspireWoodcraft вот теперь можно смотреть. Посмотрим. 😊

[@shawnevans827]

​@@InspireWoodcraftthis video was not allowed to be viewed by me and I'm guessing this person was well. I believe mine said private last night.

[@InspireWoodcraft]

@@shawnevans827 Oooh! Thank you! I had to delete and reupload because the original video cut off two-thirds of the way in. That was probably at the same time. I had set it to private to try and figure out was wrong.

[@kevinkelley332]

The torch in the foreground was distracting. Can't believe you didn't project the vision for the viewer.

[@InspireWoodcraft]

@kevinkelley332 I’m just going to go ahead and assume this is meant to be sarcasm.

[@kevinkelley332]

@@InspireWoodcraft no it’s not. It was a suggestion for you to frame your shot you arrogant ungrateful puke. You don’t deserve your audience. Cocky schmuck.