Рет қаралды 626,735
Check Out Our FREE GUIDE: 25 Must-Have Carpentry Tools...Under $25 Each!
www.thehonestc...
AFFILIATE LINKS FOR TOOLS:
Dewalt 10" Table Saw:
amzn.to/38maynl
Dewalt 12" Miter Saw:
amzn.to/3rakgAk
Makita 7-1/4" Circular Saw:
amzn.to/3bTcRz3
Porter Cable 18 ga. Brad Nailer:
amzn.to/306C8Af
Dewalt 4-gal Wet/Dry Vac:
amzn.to/3e8PDYp
Dewalt Drill/Driver Combo:
amzn.to/3bZIzKO
Bosch 25 pc. Quick Change Hole Saw Set:
amzn.to/3sN5sIa
Occidental Fat Lip Tool Belt:
amzn.to/2OeMHi0
Occidental Tool Belt Harness:
amzn.to/3bTimxL
(These are affiliate links. When you shop through these links, we receive a small commission at NO EXTRA CHARGE TO YOU. We greatly appreciate the support!)
FOLLOW US ON INSTAGRAM:
/ thehonestcarpenter
FOLLOW US ON LINKEDIN:
/ thehonestcarpenter
Also, be sure to check out our other videos:
Miter Saw Table Build:
• MITER SAW TABLE BUILD ...
Rolling Table Saw Cart:
• AWESOME ROLLING TABLE ...
My miter saw dust port does very little to cut down on the volume of saw dust entering my shop space. So, I put together a new dust hood and DUST FUNNEL. Check out how I did it!
DUST FUNNEL HOW-TO:
1) I retrofitted my miter saw table by cutting a rectangular hole in it with a jigsaw.
2) Using scrap melamine shelves, I assembled a miter saw dust hood by attaching them with plywood scraps and wood glue. I also included triangular gussets in the corners for support.
3) I then assembled a melamine box in the same shape/size as my table cut-out. I cut and attached melamine ramps to the interior walls to create a funnel leading toward a dust port at the bottom.
4) I attached this dust funnel box to the underside of the table and framing members using 1-5/8" screws.
With this dust funnel hooked up to a shop vac, and the shop vac on, I've noticed a serious drop in airborne fine dust particles when I make cuts using my miter saw. When the cutting is done, I can also just sweep large grain dust into the dust funnel for clean-up!
Thanks for watching!
Visit us as:
thehonestcarpe...