Install V2Ray Client on OpenWRT and Configure Vmess

[@seeeseses8139]

Thanks for making this video in English. I will love it if you can make a video about installing the v2ray-core on an external drive attached to the openwrt router. Thank you.

[@techies365]

Same method just need to use EXT-Root before doing anything and right now I don't have that hardware otherwise I would done that.

[@MrJoelmod]

@@techies365 How can that ext-root be used? Please

[@techies365]

You need to follow openwrt ex-root guide. But complex but should be easy if you are technical.

[@MrJoelmod]

@@techies365 gotcha, but can you point me to that guide? Pls, where is it?

[@vinhhoang4227]

Thanks for the very detailed and easy to use instructions. Please make a video on how to install the password on openwrt and how to use it in the passwall. thank you

[@techies365]

Will do. Thanks for your support.

[@mushfiqsaif485]

If you have time, requesting an updated video on the bypass series as most of the providers has taken down these services. Best wishes for the upcoming videos!!

[@nowwafali6331]

i have problem when v2ray running when i try to open any website i get this error "PR_END_OF_FILE_ERROR" ====================================================================================== finally I solved this problem Answer : Make sure the time of OpenWRT System is correct

[@mohammadmahdighasemi7396]

I have GL-SF1200 with 2.90mb free space is there any other way ?

[@techies365]

Use ex-root method

[@ebrambadpa]

Hello I installed v2ray and set up my server on it with your method. But only my IP address changes and when I open the KZbin site, which is filtered in the country, I cannot enter the site again.

[@LifeTV-h2s]

I am getting HTTP error 521

[@techies365]

It's probably not installed properly

[@amirrahimi8835]

V2ray status is running when i set my default gatewy opwrt ip aadrees not change

[@SamanYaghoobi]

hi tanks for making this video | i want to some web site or ip use a direct connection insted of v2ray conection can you help me how do this? id add my web or ip in routing with 'direct' tag and in out bound set protocol to freedom with 'direcct' tag but not working

[@chuc2rk]

Thank you so much! work fine for me! But how do I find transparent proxy port and address.

[@ongabonga2792]

Thanks mate but I always get the error "Can't get V2Ray version". Any idea how to solve it?

[@techies365]

Either install a Firmware that comes with V2RAY or build your own firmware

[@hamideatemadi1818]

please help me i have this problem too

[@anilwee]

Hi @Techies365, finally i have managed to import the vmess script as well.. when started the vmess it says it is running.. but no VPN.. how come< (the same vmess script gives me the VPN connection with both android and ios v2ray apps)

[@techies365]

Probably need to check log to whats going on. We don't have much experience with V2Ray as WireGuard is more easy to use.

[@ehsan3500]

Thanks for the great step by step tutorial,would you please make a video how to setup openwrt xray and passwall aswell, most of documentationa are in Chinese

[@techies365]

We really wanted to make them but we don't have enough hardware resources to test them. Hopefully someday.

[@msvf2]

In global settings there is need for a V2Ray file path. From where do I get this file?

[@techies365]

You need deploy according your configuration. We don't have much expertise regarding V2Ray as there too many protocols.

[@msvf2]

​@@techies365 Thanks for the hint it now work with vmess.

[@bmax5928]

Appreciate this ♥️ but i wanna ask, what if i want to import vless ?

[@techies365]

Try and let us know.

[@anilwee]

I have done the installation as per the video.. but I can not import vmess... after import, I get an error to say the vmess script not valid, how come?

[@techies365]

You probably need adjust configuration and then import

[@anilwee]

@@techies365 already did a couple of re-installation.. but still getting the same error "invalid link" when I want to import vmess

[@techies365]

Manually input. Direct import doesn't work.

[@anilwee]

@@techies365 ok can you elaborate this further... usually you get the script and how to find required details from script to manually input pls

[@lintratekargentina]

how config v2ray server? is possible?

[@techies365]

There many options to install panel for V2RAY

[@user-kw7tw1fp1b]

please how can setup the ssr plus+ in router TP-link Archer c7 v2 flash 16MB please help me

[@techies365]

You need to setup ex-root. After that follow any web guide.

[@user-kw7tw1fp1b]

@@techies365 Do you mean installing a USB flash or finishing ubntu system

[@techies365]

Yes, installing OpenWrt on a sd card and use it with Router USB port

[@user-kw7tw1fp1b]

@@techies365 Thanks for the reply and follow up ❤️

[@nelsonbalmaceda7046]

What router below $100 dollar that I can install v2ray ? Or a 4g modem router ?

[@techies365]

Search GL-iNet

[@kinomen5388]

Thanks for your youtube tutorial! hello, I installed it as you showed on the video. But I can't connect to the server, please help. Thanks for reply.

[@techies365]

You need to configure it according your server settings.

[@darkhistory1313]

I need this on TP Link Archer D2, can it be done?

[@techies365]

Check Router spec and see if you have 16M flash

[@user-cj9xr3vu6y]

What a max speed with enabled vmess on your router?

[@techies365]

It depends on your ISP and VPN server speed

[@sevvian]

Hi bro, This setup is good.but I would like to conditionally route KZbin to outbound proxy and rest to direct . Could you pls make a video on it .thanks

[@techies365]

You should contact with your Server administrator to do that, usually you need KZbin IP and outbound rules for those IP's.

[@mhmjrjndy]

‌thanks dear

[@biztracksingapore]

Hi. Do you have plan to do a tutorial how to install PassWall on OpenWRT?

[@techies365]

Not ideally. Because it's not popular outside China regions.

[@azmainshariar9511]

Tenda router f9 a Openwrt setup kora jaba??

[@techies365]

Jabe probably but not recommended

[@engineer7154]

link of full version of v2ray please?

[@techies365]

Check our latest video

[@RealMikes]

perfect

[@soreekgh]

do you hv Trojan?

[@techies365]

No

[@mr.firefox8364]

Great video! how can i add shadowsocks account on there as client?

[@techies365]

You need to follow the instructions from providers

[@khuyanbang9268]

How to install ssh/ssl client on openwrt

[@techies365]

Use luci-ssl

[@msvf2]

Thanks for your guide. My IP is changed when I check (eg on browserleaks.ip) BUT webRTC still leaks my original IP. This leak does not happen when I connect to same VPS with andriod client. Any thought how to stop this? (without browser addons). Also how can I use VLESS tunnel? Highly appreciate your help

[@techies365]

Maybe you can use browser plugins

[@fattihiekhmal6145]

Can i install into Mi4A 100m?

[@techies365]

Yes

[@umayerhossain8233]

Bro make a video about how to setup v2ray on server and how to create v2ray dashboard

[@techies365]

There are lots of one click Chinese script thats why I'm not making any. Probably some day when I able to make my own script.

[@techies365]

Check description

[@juanorso8421]

Thanks for your youtube tutorial! It works perfect. But when I'm connected to the v2ray server I lost SSH or webadmin access to the router. If I disable v2ray in /etc/confg/v2ray I regain access. What can I do? Thanks!

[@techies365]

I haven't such issue, probably you have firewall rules

[@TNTTunnel]

opkg_install_cmd: Cannot install package v2ray-core-mini. why!!!!

[@techies365]

Install a custom built. There are lots online builder available.

[@TNTTunnel]

@@techies365 actually i install openwrt on mikrotik hap lite but i cant install v2ray-mini and research more than 2 days but cant find anything.can you help me ?

[@techies365]

Mikrotik got huge flash, you can go for full package

[@TNTTunnel]

@@techies365 i want use vmess on a smallest router board like hap lite another protocols such as PPTP-L2TP-IPIP-GRE-EOIP-OpenVPN even SSTP blocked by government so my router completely unusable so need use v2ray.only way to use v2ray on mikrotik is install openwrt on this that i do it but cant install v2ray on this!

[@azmainyousaf8916]

how to lnstall openwrt

[@techies365]

Search Google your Route model

[@MehdiDashtban]

Hi

[@techies365]

Hi

[@mdabdussattar3168]

shadowshocks kivabe install korbo

[@techies365]

Eita V2RAY, Shadowsocks er jonno alada system ache

[@rifathossenrakib6264]

@@techies365 shadowsocks er tutorial den

[@Ali-wf9ef]

luci-app-v2ray looks to be very old and out dated

[@techies365]

Use v2raya

[@mdabdussattar3168]

Passwall niye video banan

[@techies365]

Thanks, will try.