Installation kit 182cc

[@PapsTolitsVlog]

Nice GOD BLESS YOU

[@gilleslucas6787]

What is the cost to let it do by a professional?

[@asubasnet2922]

What main jet and pilot get are using after the big bore mod?

[@alexvdl1715]

C’est comme un 2T ? On doit change le piston ou sur 4T tu changes 1 fois et c’est fini tu changes plus ?

[@FredG_R]

Hello, I have a yamaha wr125r / x with kit 180 malossi, for 3 months, bought from a private individual. the first 2 months ok, but now I have a problem with the cooling .I have a red light that lights up randomly at low speed as at high speed.I stop and wait, the fan turns.Then the light goes out. Important note: the water of the radiator goes into the expansion tank and the radiator is emptied a little bit as you go. So you have to empty part of the vase and put it back in the radiator. There is no automatic return of water in the radiator. The changes I made: _I changed the radiator cap by a new one. _Fluidizing liquid. _thermostat changed. _A garage told me that the temperature sensor near the thermostat was in good condition. _No leakage at the external level. _I opened the water pump to see if the turbine was not damaged.It looks good. On this model of water pump there are 2 compartments. Apparently one where the turbine was circulating water and next to another compartment but I think it's engine oil for the turbine shaft? is that it? After all that I do not use the bike because I'm afraid to break. What do you think of this and can you enlighten me please? Thank you fred

[@daan-6734]

Fred Gouriou i had the same srory but it was the head gasket was broken on the 180 kit

[@Asonrap]

Put 2 radiators, there should be no problem of over heating. Mine 2 years old still going strong.

[@mxsnipershark]

You’re head gasket is blown. Change it

[@kcrichton7485]

Expansion tanks should have water in them....

[@jagadeshkumar1887]

what is the tappet clearence size sir

[@samueljamesling5329]

how was the kit?

[@CRAZYRUSTYVW]

Great video but why is there no sound

[@Juke847]

Classickid21 because its stolen content from other channel which speaks in germany

[@FredG_R]

Bonjour Tony ,tu parles français ou anglais ?

[@nathansakuma4829]

Quelqun serait le quelle de c'est 2 kit offre le plus de puissance/vitesse pour une 125cc le kit 180 malosie ou le 180 athena ?

[@geraldbussac5145]

Ces lathena mais le malossi est beaucoup plus résistant

[@keithmunns3248]

Not a torque wrench insight !! nuff said

[@MahediHasan-iu9ki]

How much valve clerance in and ex side

[@danieldias6608]

.15

[@redrider9933]

This kit is suitable for beta 125 lc?

[@josefvachal9239]

yes it is

[@daan-6734]

I cant get my dynamo off i need to split my block

[@oscarmuffin4322]

Then you need to get a puller.

[@jimmylad91]

Oscar Muffin There’s an art in doing it without a puller

[@jujumimisicu8234]

Cest pour qu'elle moto?

[@pli12]

yzfr 125

[@jean-bernarddolleans4700]

tous les Minarelli Yamaha 125 beta reju hm husvarna ect

[@indika4274]

Salut ! sur un SWM 125 R il y a du kit 180 dispo ? merci d'avance ;) ride safe Y

[@AndrewPattullo]

Load of crap .... the timing chain jumped bk in like magic! Missed out the whole bit