WR125X 180cc kit + cam | Tuning story 2k20

In this video i present you my build story of WR180X... all the parts in the video are from different websites!
The bike is still running and operating good for 5000km now, I haven't tested top speed because the engine needed to be prepared for that haha.
The bike has much more power and is at top so much quicker ( top being around 105km/hour for now) its expensive I know, but so much fun...
I love this bike...
Thnx for watching.
Follow: instagram= Wr180xRider.

[@zezz7500]

Love the vid, ive got a wrx 2015 myself and have recently upped my interest in increasing some power, so this video was great. Greetings from Norway :)

[@UrheiluhuIIu]

My friend sold me 200km driven arrow exhaust, malossi cylinderkit, stock cylinder head and forcemaster 2 for 400e. Best trade i have ever made ;)

[@martisefski]

Hi, I'm here with a question. I just bought myself 183cc malossi cylinder kit with malossi force 2 power commander whitch has 4 maps. I installed the kit with the commander and it doesn't run great at all. Well it runs pretty desent on neutrual but it could be much better. I've chosen the 2 map (0,1,(2),3) (modified exhaust system, malossi cylinder, original head, original camshaft and malossi air filter), I have every of those items except the sport's air filter, it's stock. What do you think I should do?

[@josefvachal9239]

How many km's did you put on this kit and did it last?

[@nilsgutsche6854]

Hey can you send me the map that you youse by the power commander5?

[@ExitDoink]

waar blijft de turbo kit a sehbi

[@joelgraba1077]

how fast does it go now?

[@jimmylad91]

Any chance you can post me the map for the 180cc kit unable to get a garage to do it. If not I’ll just wait until I can afford the autotune

[@connorbarry6316]

How hard is the cam to fit

[@ItsFL1CKZz-onTikTok]

Been debating on doing this to my wrr but tbh seems pointless, I may aswell buy a bigger bike or spend the time Engine swapping

[@Lucas-vu2cr]

In welke stad woon je? K heb een ktm duke 125

[@adrix9692]

do you need to change the head if u want to install 180 kit? Is stock head compatible?

[@thom8325]

No you don't stock us compatible

[@thejakeanade1601]

Hi mate, I have a WM racing 180 bore. Could I pair this with a mallossi cam or a top performance cam? Is the cam worth getting?

[@beervercammen]

Hard to say man, it will up your performance, but I dont know by how much

[@thejakeanade1601]

@@beervercammen thanks for your reply I went with a uma racing camshaft and have a 45 pilot jet and a 135 main. It runs very well and is quick. It seems to really shine in the mid - top end now with everything combined

[@jimmylad91]

I’ve recently put a 180cc kit in mine. My timing seems off. What’s your position of the camshaft sprocket marker, is it left of the marker on the crankcase towards exhaust port?

[@beervercammen]

it should be right in the middle man. you can check it at the bottom and up top it should all be aligned. It is not a easy job to do with no experience.

[@jimmylad91]

@@beervercammen I’ve removed the cam sprocket a few times now. The line doesn’t sit directly to the marking on the crankcase. It either sit towards exhaust side or towards injector side. I’ve set it slight towards the exhaust side and on the crank it’s on the second mark as the first is the firing mark if I’m correct? I’ve noticed it’s back firing out of the inlet on low revs every few seconds.

[@beervercammen]

@@jimmylad91 mhhhm mine is pretty accurate.

[@jimmylad91]

@@beervercammen I was wondering if you still have the map for the 180 kit and if you had it fine tuned. I’ve tried a few maps but don’t seem to be that great.

[@uksupuksu]

U have to retune the bike, its running way too lean without any adjustments

[@bkfmoto2359]

Hey bro, i have a Fantic 125 and i ordered 178cc Uma racing kit with superhead pro, will my connecting rod and crank be fine if kept original?

[@beervercammen]

nah mate XD.. I mean its a chance of luck but if yyou also have the head you make around 23HP thats way to much bro.

[@bkfmoto2359]

@@beervercammen What if i only put on the head on the original 125 cylinder?

[@beervercammen]

BKF Moto then I suggest to only put on the 180cc because the bigger head won’t do jackshit to a normal 125 maybe 1-2 horses

[@bkfmoto2359]

@@beervercammen So i can put on the 178 and not the head to be worry free? 👌

[@beervercammen]

@@bkfmoto2359 well definitely not worry free XD... it could break after 400km depends on how you treat it and the quality of the product, and there will always be a portion of luck. I did a 1000km break in period and changed the oil 5 times in that period on different intervals. that's the best advice I can give.

[@SachithAndSachini]

How about fual condition before and after upgrade into 180cc ?

[@beervercammen]

Nothing noticeable

[@Sheesharito]

Hey, I found a WR 125 X for a nice price, but it has 56.000 km on it, is it worth it?

[@aenaselhaouachi9807]

Buy mine with 11.3k kms

[@Tonymacaroni298]

I als ik put a 180cc mallosi inside whit a power comandor v from dynojet bhut some how my bike wont get over 7000rpm did you changed the cdi

[@beervercammen]

@@Tonymacaroni298 no get it pro tuned

[@Nico-ds9nz]

Du u have a link to the camshaft?

[@The3SIXTYgamerNL]

motogaga.com/cylinder-head/1209-uma-racing-camshaft-spec-r1-yamaha-t135-t150.html this is the one.

[@DanielCatarinoo]

​ @Beer Vercammen why wouldnt you do this if it was today?

[@beervercammen]

@@DanielCatarinoo just buy a bigger bike 😂

[@blazexiytb]

Tutorial to replace cam shaft Mine is broken? Malossi 180cc, does a tubing camshaft exist for Rieju MRT 125? Should be same engine

[@beervercammen]

@@blazexiytb if it is the same engine then you can replace its… I don’t have video of it, but it is very easy if you have alle the right parts

[@blazexiytb]

@@beervercammen okay but how do I split the engine without everything falling out then?

[@blazexiytb]

@@beervercammen tbh I don’t know what tools to buy to split engine and build it back together

[@beervercammen]

@@blazexiytb you dont have to split the engine for the camshaft haha, just take of the top little cover and the cam chain tensioner. make sure all is alligned an install back together, but as far as I can tell i woundnt suggest you do it by yourself haha

[@lemur1949]

do you NEED to change the cam?

[@beervercammen]

no not needed. but bigger bore would be good if the valves are open longer

[@sk.bikelife_038]

Zelfde motor blokken als beta rr 125 lc 2013?

[@josefvachal9239]

Yes

[@cainc1673]

Hey man what valve clearance did you set for this

[@beervercammen]

@@cainc1673 the cam came with a set description

[@malingaaa]

How much did. you payd Overall?

[@beervercammen]

Malinga Funneveoh around 900 euro.

[@kamn8259]

How much oil was it burning stock?

[@beervercammen]

@@kamn8259 100ml every 500km

[@nilsgutsche6854]

With wich map du you drife this bike (From the power commander)

[@beervercammen]

You have to get it dyno tuned

[@nilsgutsche6854]

@@beervercammen but yu hafe the map or not

[@nilsgutsche6854]

I have a Nockenwelle 180ccm kit from malossi and a takoni exhaust

[@beervercammen]

@@nilsgutsche6854 yes I have the map but it’s not free. It cost me 200 total so a copy is 50.

[@mraadil1958]

@@beervercammen can I get a copy of the final map? Will pay for it

[@Jeroen358]

yo bro wat is je top snelheid met de 180cc kit geïnstalleerd ?

[@beervercammen]

Ik weet de top niet precies aangezien ik hem niet wil slopen, maar op de snelweg trekt hij zonder enige moeite en dan bedoel ik echt in enkele seconden naar 125/130 km/uur.

[@sumo.niggle]

why did you invest so much money in a 125??

[@beervercammen]

fck it

[@dois9sete5Ms]

almost like a stock dtr125 😂🤭

[@sonicboove4865]

Very true, but this wont go bang by the end of the year.

[@dois9sete5Ms]

@@sonicboove4865 lol you say so... a stock 2stroke vs mod 4stroke, don't know about that... but yeh 2stroke are built to fun&games not for life time

[@beervercammen]

@@sonicboove4865 The engine is performing well for 5k KM now.

[@joonah7316]

@@sonicboove4865 yamaha dt wont break ever 😂

[@nilsgutsche6854]

Hey can you help me I want do do the same

[@beervercammen]

Sure with what do you need help.

[@nilsgutsche6854]

You can go Un your inster profile and look their I have written you

[@tdick1541]

Almost double the power you said 🤣🤷🏻‍♂️ It’s literally half the power, do the math?? Kudos though… Impressive, but why not just get a bigger powered bike?

[@limburgsestaat2194]

my nissan micra is faster

[@malingaaa]

No