How to install light kit - *skips the wiring* Thanks for the help, really needed to know how to stick a light to my motorcycle.
@bikerlad31383 жыл бұрын
1x Fuse 1x switch connect from battery positive to red wire of led then black wire to earth point or back to negative battery terminal easy enough.
@gcoolie81403 жыл бұрын
kzbin.info/www/bejne/qneQdaZqqNqoodU
@eddiewu23362 жыл бұрын
kzbin.info/www/bejne/qneQdaZqqNqoodU
@rondobrondo2 жыл бұрын
You should have looked at their channel for the wiring video before complaining. It's right there on the channel: kzbin.info/www/bejne/qneQdaZqqNqoodU
@captainlevi1322 жыл бұрын
@@bikerlad3138 huh
@joshuajones82094 жыл бұрын
It would’ve helped to actually see the wiring part
@Pokermoneyhtx4 жыл бұрын
Lmao the whole reason I watched the video
@ronninjah4 жыл бұрын
There's a video for the wiring I think
@rositap12474 жыл бұрын
It references a full wiring video in this one but where is the link??
@tiburon604363 жыл бұрын
@@ronninjah I'm still looking for such video, they mention it but there is no where to find it...
@eddiewu23362 жыл бұрын
kzbin.info/www/bejne/qneQdaZqqNqoodU
@Grainsauce5 жыл бұрын
This music makes me feel like I'm getting ready for war, instead of installing led lights on my motorcycle.
@bg44063 жыл бұрын
Lol
@svivert05943 жыл бұрын
Reminds me of the intro video before playing lazer tag
@tr1xy6552 жыл бұрын
@@svivert0594 LMAO My exact thought
@ricko23732 жыл бұрын
@Grainsauce CALL OF DUTY
@007camera2 жыл бұрын
🤣🤣🤣🤣🤣👌🏻👌🏻👌🏻👍🏻👍🏻
@Liquid1882 жыл бұрын
Its so nice to learn how to remove the tank and put shiny stickers everywhere. :D You should have shown the electric wiring.
@rondobrondo2 жыл бұрын
You should have looked at their channel for the wiring video before complaining. It's right there on the channel: kzbin.info/www/bejne/qneQdaZqqNqoodU
@jabbacoola13 жыл бұрын
Note 📝 Try not to put leds on ur fairings put them on the frame of the bike cause trust me ur fairings will be off and on more then a light switch! And u don't want any wires hanging from your fairings.
@globalmaster903 жыл бұрын
What if the frame gets too hot though?
@rondobrondo2 жыл бұрын
you can unclip the leds from the wiring harness
@GurthRacing9 ай бұрын
that is so smart i would have only realized after i was finished lmao
@MrGarnettmiller4 жыл бұрын
Announcer: Clean the area for each strip. Yet under the bike is dirty as shyt
@ledglow4 жыл бұрын
But as long as the mounting location for the strip is clean 👍
@lalodaniel6283 жыл бұрын
Dude I've been trying to click on some of the other tutorials when the windows pop up and all 4 option squares do not work. I'm trying to see howu guys did it and can't even watch the videos....what's up with that....
@o.97639 жыл бұрын
Helpful video. I was able to install led lights on my bike.
@ledglow9 жыл бұрын
+OSAGIE EHIGIE Glad it helped out! Send us some photos of your bike to our Facebook or Instagram pages!
@ahdkfknsbcienfnsk5 жыл бұрын
OSAGIE EHIGIE Wha really? I thought you would’ve installed them on the floor...
@neverenough717 жыл бұрын
Great product with a easy install process with help from the video's. Can't wait to hit the road to show them off.
@dmcalonan13596 жыл бұрын
any cop that would pull someone over for led on a bike is a prick. "quate froma cop friend of mine" suggestion. Ohio. no red or blue ontop, OR facing forward. blinking multi color changes not advised. I have this kit and rin green as i have the moster edition kawasaki zzr6. I do not ride as much as I would like, but never had an issue. I have not with any other color than green. I see red and blue around town HOWEVER I have not seen either red or blue this year.
@tmcalis5665 жыл бұрын
@@dmcalonan1359 Yup! I was told the same thing...that cops won't pull you over unless you have blue or red and especially if they're flashing or pulsing. I also installed this LEDGlow Green kit on my bike (Kawasaki Ninja 400 KRT) and recently rode by multiple cops in my city with my lights on. They have not pulled me over...only receive a nod or wave (cops on bikes). So ye, I think with green lights we are safe. Also this kit was very straightforward to install, for those wondering. It took me about 5hrs to place all of my lights, and I did it with the bike on it's kickstand. I've never wired anything before in my life and this was totally easy to do.
@sejoy_g2 жыл бұрын
@@tmcalis566 are white lights safe in new york?
@gabrielgarcia-ur4km3 жыл бұрын
I want to add some led light but I want them to be timed, what I mean is this -> As I am riding I want to have my CBR to show white led lights when I’m under 6500 rpm. As I pass 6500 rpm I want the led lights that are white to turn red can anyone suggest any tips/shops in San Diego
@threethrushes7 жыл бұрын
Epic music is epic.
@The_Highrise233 жыл бұрын
So is speeding but that doesn’t stop you🤷♂️
@abidsaad20364 жыл бұрын
It is soo nice to see something like this and it is more good ..... Can you do it with Yamah Nmax for the next time?? I would like to have more knowledge about it thank you
@wiley5oh518 жыл бұрын
How well would these strips work on a cruiser?
@ledglow8 жыл бұрын
Thank you for the interest in our product! These kits are universal so they'd work absolutely great on a Cruiser!
@runit57722 жыл бұрын
Love the lights.. can Xtra be added.. I want to see it from the moon..
@ledglow2 жыл бұрын
Yes, our motorcycle kits are expandable.
@holywatcher030453 жыл бұрын
i have the same LED Kit, all i need now is a motorcycle xD
@reviewdykeusa83478 жыл бұрын
You guys have amazing kits and at a cheap price.
@nicskeptic10 ай бұрын
2 things I would not let these guys do: 1 strap my bike down. 2 install my light kit.
@williamwatson9112 жыл бұрын
do you have a video on where to mount the lights on a gl1800 2010 and up
@Raez_XL7 жыл бұрын
Are these wireless? What can I use to light up my bike rims?
@ledglow7 жыл бұрын
Yes, our motorcycle kits come with wireless remotes. To light up the wheels, you would need to install strips to the underside of the body where the light can shine down onto the wheel. We do not have any lights that are made to be mounted directly to the wheels.
@dieselsc51604 жыл бұрын
That's my bike bro !
@Reeseybaby3 жыл бұрын
Question how long should this installation take? Shop telling me it's roughly about 4-6 hours of labor rate. Y'all make this look like it can be done less then a hour tops. I might try to do this on my own when I order it.
@ledglow3 жыл бұрын
It depends on how large of a kit you purchase but a basic kit should take about 1-2 hours for you to do it yourself. Most time consuming part might be where to hide/run the wires. Other than that, it's pretty easy.
@Reeseybaby3 жыл бұрын
@@ledglow thanks I'll order in another week or 2 I guess I just gotta take my time doing it. My friend from Florida told me it's only about 1-2 hours tops & I should do it myself instead of having a shop milk me for 4-6 hours for a 12 pcs set.
@ledglow3 жыл бұрын
Definitely do it yourself. We're here to help if you have any questions.
@Reeseybaby3 жыл бұрын
@@ledglow thanks a million. Whenever I get it and by the time I complete it I'll update yall on here
@Reeseybaby3 жыл бұрын
@@ledglow update thanks a million I definitely did it and got it working. I just can't get why it won't connect to my phone I'm still working with that but the more important part is it works with my remote. I want to ask did yall left 1 of the connectors open "just in case we want to add more lights" cause I look and said I know I used them all up around the bike. But I'm definitely planning to add extra lights. Thanks again yall
@tiburon604363 жыл бұрын
ok. if I click on the video "how to power up the kit" it won't work,., my kit came with a red, a white and a black wires, where should I connect the white wire?.
@ledglow3 жыл бұрын
The white wire is the antenna for the remotes. It doesn't get connected to anything.
@tmgarza18833 жыл бұрын
Its not dangerous or will damage the led lights if I cut them??
@ledglow3 жыл бұрын
Only cut theme where the instructions tell you to cut them.
@NoMonkeyBizz8 жыл бұрын
i order some of these cant wait to install them. bye the way i could connect them with a toggle switch?
@ledglow8 жыл бұрын
I am sorry to hear that the lights do not seem that bright. If the kit is adjustable, in terms of brightness, there will be a paragraph in the instructions detailing how to adjust the brightness of the lights.
@ledglow8 жыл бұрын
I realized now, that you have left two different comments. Regarding to be able to be on a toggle switch, only the Classic Style would allow you to do so.
@NoMonkeyBizz8 жыл бұрын
Ok.
@buddhabenjie12 жыл бұрын
How Long Can You Leave The Lights On Before Killing The Battery ?
@ledglow2 жыл бұрын
That depends on a lot of different factors.
@theguy19916 жыл бұрын
If you're attaching them directly to the fairing and you need to remove the fairing for an oil change etc., can you unplug the wire from the strip? Otherwise this seems like a pain to have them attached to fairings.
@ledglow6 жыл бұрын
Each strip can be disconnected from the power harness that goes to the control box.
@rondobrondo2 жыл бұрын
You can unclip them from the harness
@silbernersurfer8264 Жыл бұрын
What is the width of the stripes, please? Thank you!
@dustindavidson8493 жыл бұрын
‘Remove the seat…….DAHDAHDAH!’ Bro chill
@1Shinzo2 жыл бұрын
Is it waterproof?
@ledglow2 жыл бұрын
The stripes and wires are waterproof but the connectors are not. So we recommend tucking those somewhere they won't get wet.
@jessicamarcos15 жыл бұрын
I have a three pin connector. I put black to black and red to red on the battery but what do I do with the white wire?
@ledglow5 жыл бұрын
The white wire is the antenna. It does not need to be connected to anything.
@nitramonirder24953 жыл бұрын
What kawasaki is that?
@toptierfish93355 жыл бұрын
I just ordered this in red for my ninja with led turn signals duel Ducati race exhaust and custom grips
@ate70265 жыл бұрын
the beast16. Be sure it’s legal. Red or blue is illegal in most United States
@davidhedrick79382 жыл бұрын
I have that same bike
@marianandnorbert Жыл бұрын
the in video links don't work
@mikefox12648 жыл бұрын
I got my lights hooked up they look great however my battery died after riding with the lights off. Are they putting a draw on the battery with the lights off?
@ledglow8 жыл бұрын
Mike, I am sorry to hear about this issue. Now, the kits do have a slight draw to them when they are off, however, it should be a very minimal amount that would take quite a long time for the battery to be drained to the point it won't start the bike. I would contact tech support about this issue either over the phone at 856-768-5700 or by e-mail at: techsupport@ledglow.com
@willmacluvinn22514 жыл бұрын
I have a zx14r....no battery under the seat.....
@callum99634 жыл бұрын
Do these constantly drain the battery?
@ledglow4 жыл бұрын
There is very minimal draw on the battery when powered off.
@BMWalker88827 жыл бұрын
I love these lights. Would I be able to use them on a Suzuki 750? And I would I be able to remove them and mount them to another bike?
@ledglow7 жыл бұрын
Yes, if you remove them to move them to another bike, you may need to reapply some new double sided adhesive.
@believeinfaith20364 жыл бұрын
First of all id like to say it looks cool! However not really my style I prefer to have it like fast and furious where the lights are actually going onto the pavement. like driving in a cloud! Just preference I guess. Dont really like lighting up the bike iteself more so the road of which im driving.
@trkr19862 жыл бұрын
What is the white wire for
@ledglow2 жыл бұрын
Antenna for the remotes. Doesn't get connected to anything.
@joshuareid36863 жыл бұрын
Anyone know if this would look ok on a Yamaha ys
@danejurus694 жыл бұрын
How come you didn't show the bike after leds were installed???
@ledglow4 жыл бұрын
Did you watch until the end?...
@danejurus694 жыл бұрын
@@ledglow Oh sorry, I didn't catch that 2 second clip. Lol
@JoseMartinez-fi7pd8 жыл бұрын
this jose i bought the multimillion color advanced 14 pieces i just need to know about the connections from the lights to the main box plz
@ledglow8 жыл бұрын
+Jose Martinez For help for installation, it's best to contact technical support. You can call in at 1-856-768-5700 or send them an e-mail at: techsupport@ledglow.com
@JoseMartinez-fi7pd8 жыл бұрын
i bought the 14 pieces ,no instructions to install them?
@ledglow8 жыл бұрын
+Jose Martinez I apologize about this. Was this a single color, or multi color kit? Also, was it the advanced or classic style of kit? Thank you!
@amickguitar3035 жыл бұрын
I have a 49 cc peace/tao tao. Can you do a video on them?
@father.of.4.azzholes3 жыл бұрын
Leds on a moped. Epic fail lol
@DominicanOps7 жыл бұрын
Quick question, does this kill the battery of the bike? I have something similar to this but it has a remote control feature to change the lighting from flashing, glowing, etc.
@ledglow7 жыл бұрын
This kit has very little draw on the battery as long as you're not leaving the lights on for more than a few hours.
@ericeric77655 жыл бұрын
can i use this on regular motorcycle? btw im from malaysia
@ledglow5 жыл бұрын
Yes, as long as the bike has a 12 volt battery.
@ericeric77655 жыл бұрын
@@ledglow can u post to malaysia? and what is the rpice in ringgit?
@guitarcody908 жыл бұрын
so if i hard wired these into a wire thats a constant only when the bike is on, taillight wire for example, it wouldnt draw on the battery correct since its only hot when the bike is on
@ledglow8 жыл бұрын
Thank you for the interest in our product. If a power source is considered a constant, that means there is power there at all times, regardless of if the bike is on or not. If you hook up the kit's power wire to a constant source, there will be a drain on the battery, even when it's off, but it would be a very, very small draw.
@tomaskin507 жыл бұрын
Does anyone know how legal this would be in the UK?
@ledglow7 жыл бұрын
Each country and state do have different laws when it comes to LED lighting and is best to contact your local municipal.
@TheLondonCyclist7 жыл бұрын
No green leds. No colour in front or back besides red on back and white at the front. The coloured neons on the side must not reveal the bulb, but you can have red, blue etc, just only see the glow.
@alexmvidal7 жыл бұрын
Are those LED Waterproof ?
@ledglow7 жыл бұрын
Yes.
@philmarino1996 Жыл бұрын
Lose the awful music
@jepoyfumera56254 жыл бұрын
Is this item available in the philippines?
@ledglow4 жыл бұрын
We do ship internationally.
@ahmedalshatti97515 жыл бұрын
Which kit is best for a raptor 700
@ledglow5 жыл бұрын
Are you referring to the 4 wheeler?
@NameAttempt15 жыл бұрын
Where's the link to the wiring wont work in the vid
@selfactualizer20994 жыл бұрын
Same its driving me insane.
@GhostCuete3693 жыл бұрын
I need a remote.
@nitramonirder24953 жыл бұрын
Im 5'4 i feel like i can that bike
@henrykeith95427 жыл бұрын
Do you know if these are legal in Arkansas?
@ledglow7 жыл бұрын
Hi Henry, the lights are always legal to have on the bike. However, you will need to check with your state and local laws as they apply to the operation of the lights themselves. Thank you, LEDGlow
@loganhall68458 жыл бұрын
Could I put these on a old Honda CT trail 70
@ledglow7 жыл бұрын
Yes you can as long as there is an available 12 volt power source.
@goranschkreblin87694 жыл бұрын
For some reason its illegal in my country🤷🏻♂️
@forestbucher2766 жыл бұрын
How install on a 150cc scooter
@ricoreactions66775 жыл бұрын
You’re joking
@Reeseybaby3 жыл бұрын
@@ricoreactions6677 😭😭😭😭😭😭😭😭😭😭
@closedeyz5 жыл бұрын
None of the "in-video" links work, it just pauses the video.
@ledglow5 жыл бұрын
That's because KZbin removed the in-video annotations feature about a year ago.
@morgancole32558 жыл бұрын
how much was the kit
@ledglow8 жыл бұрын
+Morgan Cole Thanks for the interest in our product! All of our prices can be found here at this link: www.motorcycleledlights.com/advanced-million-color-smd-led-motorcycle-lighting-kit/
@Etrain031443 жыл бұрын
the little pops ups in the lower corner of the video are ridiculous as well as distract from the what the very video is trying to illustrate. The editor must have thought it was cute.
@dznonstop52814 жыл бұрын
Whats a remix on 4:46
@coltongold63008 жыл бұрын
Can you get these wet?
@ledglow8 жыл бұрын
+Faceless Drum Covers Yes, you can. The strips are waterproof, however, the control box is not, so it is best if that gets stored underneath the seat.
@coltongold63008 жыл бұрын
+LEDGlow Alright, Thank you.
@dinapage17 жыл бұрын
HELP SOMEONE! Anyone know with installing LED strip lights to your motorcycle, attach to the battery and with the bike off, lights off, it's draining the battery? Lights have a remote switch.
@ledglow7 жыл бұрын
Hello, Thank you for your comment. This will not drain your battery when powered off.
@garrettloeks84085 жыл бұрын
Great video but all of the dripping noises were a little out of control. *DRIP* Reminds me of the worst power point ever *DRIP* where objects *DRIP* are flying in off of the screen and text is jumping in place. *DRIP* *DRIP*
@broderp3 жыл бұрын
Another youtube over-simplified install video designed to get you to buy and then struggle.
@ledglow3 жыл бұрын
Nope, it really is pretty easy!
@rondobrondo2 жыл бұрын
You should have looked at their channel for the wiring video before complaining. It's right there on the channel: kzbin.info/www/bejne/qneQdaZqqNqoodU p.s. Ur brain is small