Installation of the 360 Fork Wrap turn signals

[@iron-brigade]

i didn't know about this kit from Taco Moto. I tried installing the Rage 360 lights - realized I needed a couple of other parts to make them work - received 0 support on what I needed. I ordered this kit from Taco Moto and they work in less than 5 minutes (450 EXC-F). Thank you so much for this kit AND instructions!!

[@stevenpelayo9418]

Great instructions. Installed today. Works perfectly. Combined with tidy tail, I am looking forward to not breaking OEM lenses any longer!

[@brendanmcgagin9381]

Thank you for the great products and even better videos. I bought this kit from you but didn’t see the LED bulb in the bag. Is it common to be a part of the kit or did I need to order this separately? I’m also wondering if it’s possible to just remove the incandescent bulb and break the circuit so that they don’t flash like hazards? Thanks!

[@FaithandActiondotnet]

Those are super slick! And the rears! Just what I'm looking for.

[@Mtn_Sea]

Hey did you buy and receive these from taco Moto co? Ordered some a month ago and have received nada. Just curious if you've had better luck

[@FaithandActiondotnet]

@@Mtn_Sea Don't have a bike yet. That's a bad review, have you got ahold of them?

[@douglasfrantzen3011]

@@FaithandActiondotnet That was probably due to the supply chain problems a year ago. I ordered the tidy tail and wrap around front lights along with some other stuff yesterday, got them today. That's like Amazon fast. edit: That's why I'm here looking at the install video.

[@martinhub3737]

Hi great video I just run into this problem. Four new led flashers and they run all together same time and fast. I saw other video and he does some resistor configuration perhaps you don’t have it. My bike KTM 350 exc f.

[@TACOMOTOCO]

docs.google.com/document/d/1HZOfWf-Mcdkdtye3I2XYLuw0mDmFWIpDKeka9Rlavlc/edit

[@Shank_Sinatra]

I didn’t get any plugs or positap whatever you said. And also mine barely stretch to fit on my forks

[@PLT123]

Where can I get those bullet rears? I cant find them on website

[@michellewilson9665]

Super simple super easy………… if you have a KTM. my husband has a 1997 ATK 604 that he wants to put them on. he said he would like to know how to direct wire the lights if you don’t have the plug and play system. LED flasher? How does that wire up when you’re wearing direct without the plugs? everything else is pretty easy.

[@TACOMOTOCO]

That’s an amazing bike! Unfortunately we don’t know anything about it

[@michellewilson9665]

What are the basic needs of your lights and flashers??? We can use an electrical meter and a test light and find the power outputs on the ATK. Then we can make a video for you on how to wire your kit to bikes made by other manufacturers.

[@themotokid5528]

Can you please do a video on how the switch installation works

[@michaelfraley4901]

If you installed the Sicass Multi-function switch which allows turning 'off' the lights while riding, I would assume the fork wrap LEDs would be on that same circuit and the running light would also be controlled by the switch. I that correct?

[@TACOMOTOCO]

No, the OFF position only turns off the headlight not the running lights

[@bmxer4life3187]

I have basically same signals (led strips front and back) on my 2020 exc. I have the relay, and I have the blinker indicator. All is installed perfect. Its been triple checked. But for some reason only my left side blinks... leds work, I have everything required from you guys. (Led relay, and indicator harness) checked fuses all seem good. Again. Lights work. I've checked everything all is wired correctly. Cant figure it out. Any ideas would be greatly appreciated.

[@TACOMOTOCO]

You can call us at the office if you still need help.

[@silvakevin1]

Great idea. Gotta get some

[@waspmeat]

are the “bullet” type LED’s on your website? Didn’t see them, ready to buy, thanks

[@TACOMOTOCO]

Not yet, by the end of the month!

[@jeffdrawe4233]

TACO MOTO CO, any update on the rear bullet LED turn signals?

[@neil4634]

I'm also looking for the bullet style rear signals. Don't see them on your site. Are they available?

[@waspmeat]

TacoooooMotoooo whatcha got? Covid delays?

[@TACOMOTOCO]

No longer offered. We’re doing the tidy tail now.

[@scottc4433]

My 21 won’t turn any lights on unless it’s running . Is that normal ??

[@CumminsTurbo4]

Yeeep.

[@ablaze3717]

Any ideas to hook the key ignition switch back on once you remove the front turn signals? I zip tied mine on for now. Just wondered if you had a method you came up with? Thanks mike

[@CumminsTurbo4]

The little billet relocator bracket doohickey can be bolted where the old right signal stalk came through. My plan anyways...

[@Rezenator10]

Can someone tell me if you can set these up to only turn on when your turn signal is on? I like when they stay dark until used.

[@CumminsTurbo4]

Watch the vid lol

[@hgeraciJJHH]

Do i need to use the ground on new indicator wire

[@TACOMOTOCO]

Don’t understand the questions

[@yukonadventurexc]

Do you have to swap out the flasher ?

[@TACOMOTOCO]

docs.google.com/document/d/1HZOfWf-Mcdkdtye3I2XYLuw0mDmFWIpDKeka9Rlavlc/edit

[@jjchopper02]

Where do we buy these ?

[@TACOMOTOCO]

What’s up my dude. We make a sell these. tacomoto.co

[@jjchopper02]

I looked on the site and I must be missing something, I can’t find them on your site.

[@tyrelthibault5264]

Didn’t see these on the website

[@gregmeeks2753]

@@jjchopper02 WISH HAS EM CHEAP

[@jefferypalmer405]

Do these work on a 2019 honda 650l?

[@ilyabarankevich]

How are these different from the NRG Rage 360?

[@CumminsTurbo4]

As he points out, these have running lights which is an awesome feature. I was tempted by Rage360s lifetime warranty but I think TacoMoto stands behind his stuff, too, although I'm a newer customer snd haven't had any issues with his stuff. Plus....braaaaap! Edit: "Forkwrap signals come with a lifetime no questions asked warranty."

[@tyrbjrn487]

Where are these for sale?

[@TACOMOTOCO]

tacomoto.co/products/fork-wrap-led-full-light-turn-signals

[@jadonwong2765]

I have a lot of problems with my signal lights. My signal lights are turned on, 1 side will flash at 100% and the other will flash at 20% how would you suggest solving it? I've had the hazard warning lights problem intermittently, finally know how to solve it thanks!

[@mikespurgin537]

what's up my man, i see we're friends on facebook so i'll send you a message on messenger. we can do a phone call if needed to help get you sorted out.

[@TACOMOTOCO]

Glad this helped you. That little indicator bulb housing gives allot of guys trouble

[@sera7744]

Is this road legal?

[@TACOMOTOCO]

These have not been submitted to the DOT for certification

[@adamh603]

"The color of these wires is irrelevant"... said no electrician ever

[@TACOMOTOCO]

Following the installation instructions ensures a successful installation regardless of the color of the running light PosiTap lead. 🤘🏽

[@davieanwilliams9205]

That's nice

[@ADVNevada]

Those are pretty trick...

[@ironhorsegladiator5034]

This will just give a cop another excuse to pull you over as this is not an approved signal and when they pull over riders for wearing a GoPro on their helmets, they will be happy to 'legally' harass you for this one! Specially if you live in California...

[@TACOMOTOCO]

Ride sensibly ans maintain a bike that’s within the requirements of your state

[@jaredcrawford8703]

Will these work on a 2014 Husqvarna FE501?

[@chiptaxfree]

Will these work on a 2018 and 2021 Beta 300 Rr?