INSTALLATION OF THE 2024+ TIDY TAIL BUNDLE KIT

[@ktomlin32]

This kit has my right blinker fast and the left has a mind of its own. Yes I’ve reached out to support. Nothing back. Watched the video instructions over and over

[@jrsmoak]

I have also reached out for help but got one vague response. After the thousands I’ve spent with you guys, you’d think you’d be more willing to help with troubleshooting.

[@wranglerstar]

So nice, you guys do beautiful work, I really appreciate these videos,

[@lukefish7562]

MIKE! 👏🏽👏🏽👏🏽 Your hard work is very much appreciated.

[@roccicicatello3]

Thanks for the Video, looked on your web store for the front turn signals in the video but did not find them, are they available to purchase by themselves?

[@Lost1Byte]

I just installed this on my FE501S. The Husqvarna's Rear fender mounting is a bit different but not much. The instructional video is missing a few things I think too. Like removing the stock signal wire harness. But it was still very helpful. and made a really clean install.

[@tyester]

Cant wait to get the slim fit switch for the '24 350 EXCF!

[@redman8123]

I already have the Tidy Tail, will you be selling the Handlebar switch and harness separately?

[@jongrabinski656]

This kit turned my turn signals into 4-way flashers. Waiting for a replacement from Taco Moto.

[@TACOMOTOCO]

Please reach out to [e-mail]

[@daleadmire1451]

Man that sucks, so much more complex than the 2023 version.

[@grutzmac]

Can you still use independent rear turn signals with this kit? For instance, could you use the Sicass flat mount led rear turn signals and your tidy tail light?

[@jck197]

When is this coming out?

[@mattkaymoto]

What do you do with the turn signal connector harness? I didn't want to leave it dangling so I loosely zip tied it, but there's not much room to secure it. Also a tip: I had to loop the turn signal wires in FRONT of the brake cable or else the line looped over and blocked my dash.

[@andrewpocock1234]

My kit had left and right signals mixed up so i plugged in reverse. No problem. Bigger problem is that the indicator lights are still running white when i have the bar switch to off. So the headlight is off but white indicators are on. So i dont have stealth mode. Can this be fixed? I see the demonstration at the end shows that thats just how it is.

[@labmetoday4993]

Handsome. The link to the shop says "404 page not found", where can I find the kit ?

[@TACOMOTOCO]

Link tacomoto.co/products/2024-excf-fe-s-tidy-tail-lighting-bundle?ToPasteboard

[@davidgrunklee8407]

Page not found.

[@MarkSpencerAZ]

Is there anything for the XC-W versions?

[@stefaneulenstein]

tough to get it to work on 2024 husky 501 connectors are mirror image. indicator is on the other side. struggling. edit: it's doable, just different from the video.

[@jconner729]

How did you fix it ? I’m installing on the same bike I plugged it all up how it should per video and nothing works lol

[@stefaneulenstein]

@@jconner729 hmm on mine it worked, it was just really hard to get all the connectors to reach. especially the turn signal indicator led into the dashboard. double check that you have all the connections set up properly.

[@schultzy507]

Do I have to replace the headlight switch to run the upgraded front turn signals?

[@MC0386]

I have a 2022 with this kit, how to I get the white led turn signals to work? Where do I get the power from

[@PowerSports]

I know i've already asked, but i will ask again, please provide us with some video of how the light and turn signals look at night. I don't want to buy something without knowing if the cars behind me will be able to tell which turn signal is on, and which direction I am going. Thank you in advance. ^_^ ... Also, the OEM front turn signal stalk design is trash, they vibrate and bend/bounce way too much because of the cheap plastic mounting brackets... Do you have any plans to make more robust mounting brackets for Baja? Very sad that the fork wrap signals won't work anymore, those are so cool.

[@TACOMOTOCO]

Photography doesn’t capture the light very well. You’re a small target on a small bike, plan on not being seen so be smart ans use arm signals in spite of the indicators

[@schultzy507]

@PowerSports just want to let you know I was recently following a 500 through Baja on a sandy section in some dust with my 4runner. He had a bag over top his fender and I could still see when he was applying the brake. It was good to see first hand because I plan on getting the tidy tail for my 500 and wasn't sure how visible he was. We ended up camped together and I let him know I could tell when he was braking since he also wasn't sure. This came up in conversation because I was inquiring about his rear light.

[@PowerSports]

If you want to see what this kit looks like at night, just search "Taco Moto Tidy Tail At Night" and my review video will pop right up. Good purchase. Would recommend. 👌

[@kmilhrdt]

Do you know how to install LED turn signals? I did not found any relay. I would like to purchase your turn signals but without the relay option this will end up to a 4 way turn signal

[@Reeve94517]

The 2025 350 excf turn signal indicator light is on the left vs the right in video. All went perfect with this exception as the harness led wire is too short. Assume the 2024 had the signal indicator on right and ktm moved it to the left for the 2025. Harness would need to modified for the 2025 to work. Searched part numbers and part 24 has a cap on left side which can be popped out and then can move the indicator to left side and reverse cap to right side so harness works.

[@TheTruth_631]

Do you loose the horn?

[@PowerSports]

No, and the new horn button is much better, too.

[@RayzGarage]

The 2024 HuskY 501 has a totally different rear fender setup then the KTM. EVERYTHING IS OPPOSITE OF THE KTM on the rear fender. Even the bolt pattern want to stock tiddy is different. Separating the fender from the fender carrier was a nightmare. You should also note that on the Husky that turn signal indicator lamp is put on the opposite side of the speedometer. That's good because it's up higher and easier to see.

[@andrewpocock1234]

Oops, overtightened indicator, spun out the rubber vulcanization. Got glue coming in the mail to see if i can secure it.