Installing 2007-2013 Chevrolet Silverado 1500 20-inch Single Row LED Light Bar Bumper Mount

[@nairblab4061]

I especially love how they never show the lights at night.

[@Boelsu1]

They are just selling the bracket, not the bar

[@4X4Grandpa]

Do you have a video for installation of the roof light bar?

[@rickc1898]

Could show us where this particular example had a switch installed

[@kewl192]

do you have any photos or videos to show how bright this light bar is?

[@RoughCountryTV]

+kewl192 It's hard to truly capture how bright the light is in photos and video because it just makes everything in the image white washed out because it's so bright. Just trust us. It's bright! It's several times brighter than your hi-beam headlights. Speaking of which, this video features a comparison of a dual-row 20-inch vs Hi Beam headlights at about 30-seconds into the video. kzbin.info/www/bejne/bpzJY4iZhNOUaqs Hope that helps.

[@JD-qr8qh]

Is there no risk to partially obstructing that opening in the bumper? For air flow etc?

[@RoughCountryTV]

There is no risk on this setup with the air flow for this application.

[@dalehuntington9402]

No

[@honcho714]

What about your trans cooler ? Thats where the air from.that hole goes .

[@zachdillon3310]

Well my Chevy 1500 came stock with a solid peice of chrome all the way across so it shouldn’t be that big of a deal

[@music10095]

They never show the wiring. That's the hardest part haha

[@RoughCountryTV]

+Max de Koning There are many different paths you can take to run the wire. We leave it up to you to choose the one that suites you best.

[@zacharyschwartz5701]

+Rough Country do you have common locations that you guys install switch panels for light bar lighting in the 2015 sierra 1500? I have the all-terrain package and want to run several light bars to a inconspicuous, yet easily reached area by the driver.

[@RoughCountryTV]

We do not. We typically let the truck owner choose the switch location.

[@salehalghamdi2880]

Rough Country regardless, at less showing us one path and the level light after the installation

[@JameGoFast27]

So how does it turn on and off???

[@alecsimmons1120]

I installed mine on a 2010 Chevy HD 2500, after about 10 uses the light took a dump. The relay is good and I have power at the light bar but simply does not light up. How do I get this warrantied out, Since you made mentioned they have a lifetime warranty. Thank you for your time and consideration.

[@chuben8160]

where’d y’all get the fender flares on the truck?

[@RoughCountryTV]

www.roughcountry.com/rc-chevrolet-pocket-fender-flares-f-c107145.html

[@raulnunez8084]

Does a 22in also fit for these truck models?

[@Todd_S]

How does it affect airflow to the transmission cooler?

[@RoughCountryTV]

Will not affect the air flow at all. Air will still be able to pass thru for cooling trans.

[@aric2352]

You do realize silverado also comes with a bumper without this hole in the bumper!!! So obviously it won't effect anything!!

[@jeremypayne3902]

What other led bars will fit the bracket besides the cree ones you sell would like a eyourlife 20 inch single row led light work as well

[@RoughCountryTV]

Jeremy Payne We do not guarantee fitment with any other brand of lights but we can check to see if our brackets will work. You would need to call 1-800-222-7023 with the length of the light from mounting point to mounting point.

[@peteavilaiii8176]

Will this fit a 2wd? Probably a dumb question haha

[@RoughCountryTV]

Yes it will.

[@motoCrossRider211]

@@RoughCountryTV what LED light bar is this, and do you have the black housing edition?

[@andrewhagadorn2791]

Does the braket in the video that the guy mounted the light to before installing it on the bumber come with the black dual row led kit or have to purchase that seperate?

[@RoughCountryTV]

The Black Series would have to purchased separately if that is the light you want to install.

[@kevinreinsr]

can you recommend a light bar for a 2016 GMC Canyon SLT 4x4? any utube videos on how to install?

[@RoughCountryTV]

You can put a light bar on the Canyon, we just do not offer any mounting bracket options for that make and model. You could try Rigid Industries and see if they have anything to offer for that make and model.

[@bentley3273]

do you have any videos of it at night

[@RoughCountryTV]

+brad bentley We do not have any. You might find some on KZbin.

[@cfoutdoors0624]

Will this impede the controls on your hidden winch setup?

[@RoughCountryTV]

No this will not interfere with the controls on the hidden winch setup.

[@jameswilcox2738]

I have done everything that the instructions say and the mount fits great but the mount seems to hold the light bar to high to where the top is covered up even when looking at the light bar level with your eyes. Is there something I can do to fix this problem?

[@RoughCountryTV]

+James Wilcox with the curvature of the bumper the middle part of the light will be in more than the outer sides of the light bar which I think makes it appear to be covered up. Have a few buddies with this same setup and there's sits the same way.

[@johngreen9946]

The link to your web site shows this is NOT the correct part: Incorrect Part Does not fit your: 2013 Chevy Silverado 1500 2WD (edit)

[@k4rgd]

How much does this adversely affect the airflow to the trans cooler? Using my truck for hauling trailers...

[@RoughCountryTV]

Air flow is not effected enough to cause any problems... even when hauling a load.

[@dakotaflynn9394]

Rough Country bullshit

[@bentley3273]

should the red light on the on/off switch stay on when the truck in not started

[@RoughCountryTV]

Depends on how you wire it. If you wire it directly to the battery, the red light will stay on regardless of whether the truck is on. If you wire it to the ignition, it will turn off when the truck is off and light up when the truck turns.

[@MrTurtleman333]

Is there a light bar bracket like this for a 2011 gmc sierra 1500

[@RoughCountryTV]

Daniel Pettifer Unfortunately, we currently only offer the upper windshield brackets for the 50"and 54" light bars.

[@davidshaver7448]

So I bought the 20" single row bar for my 2012 GMC Sierra Denali...any suggestions for mounting hardware ? Will the one with the kit work like the video?

[@RoughCountryTV]

We do not offer one that is compatible with the Denali in that year make and model. I would recommend checking with Rigid Industries.

[@TheBlanton14]

but how good does it work?

[@dianecasad2011]

just bought a silverado with this light bar and it never turns on, how do i turn this led bar on?

[@RoughCountryTV]

Do you have the light bar properly wired to the vehicle?

[@NorthCedarCreekRanch]

My 2008 doesn't have the bumper opening and I don't want it on the roof. How can I mount it?

[@RoughCountryTV]

That's the only two options we offer for this make and model vehicle.

[@andrewhagadorn2791]

EastTexasOutfitters, buy the rough country bull bar and there is pre-drilled mounting holes on the bull bar for a light bar. that's your next best option

[@dfwrc]

I have a 2009 GMC 1500, will this fit the gmc ?

[@RoughCountryTV]

+Bryan Catrina No it does not fit the GMC. The mounting area is different.

[@gsouth2141]

that truck in the video what size lift is that ???

[@RoughCountryTV]

+gsouthgate south 5" lift on the truck in the video.

[@JDG119]

dose it have to be the single row light bar or can I run a double row light bar with your mount + Rough Country

[@RoughCountryTV]

+joshuagarland119 Single row light bar on this setup

[@RedneckGarage]

Sweet

[@aaronstranathan1099]

Is it possible with a 25 inch bar?

[@RoughCountryTV]

+Aaron Stranathan No

[@DanielRodriguez-je4hp]

Does this light bar not fit 2011 GMC Sierra? if not, how come?

[@RoughCountryTV]

Yes this particular setup is only compatible with the Chevrolet and not the GMC. The GMC bumper is designed different and the brackets do not mount properly.

[@DanielRodriguez-je4hp]

Rough Country thank you

[@hectorDail]

How to wire into.??

[@mikeyeck85]

Will this fit a 2008 gmc 2500hd bumper at the same location.

[@RoughCountryTV]

+Mike Yeck Yes this will fit the 07-10 2500 bumper

[@mikeyeck85]

+Rough Country , awesome thank you

[@danielholder511]

Does it fit a sierra

[@RoughCountryTV]

Daniel Holder Unfortunately it does not, but if you're not already, you can subscribe to our KZbin channel and/or regularly check our web site at roughcountry.com for the latest product updates.

[@joshuaadkisson2506]

Does it fit a sierra????

[@RoughCountryTV]

Unfortunately it will not. The Sierra has a different bumper.

[@jcena1986]

does this fit a 2500 hd?

[@RoughCountryTV]

Unfortunately it does not, but if you're not already, you can subscribe to our KZbin channel and/or regularly check our web site at roughcountry.com for the latest product updates.

[@Worgverine]

I have a 2007 Silverado, Unfortunately, I do not have that space on my bumper. Mines just a flush bumper, Sucks I want a lightbar but hate the roof mounted ones

[@BlackC5Z06]

Look at the Rigid Industries fog mount kit. Can install up to 4 cubes in place of your fogs.

[@meganceceliaford]

Installing light bar 2013 chev

[@robertlanda8843]

How do you turn them on

[@RoughCountryTV]

It comes with at push button switch that can be mounted in the cab of the vehicle and wired directly to the light.

[@robertlanda8843]

+Rough Country i bought a truck that came with BajaDesigns of road spot lights, but I can't seem to find any button how do i turn them on any help?

[@RoughCountryTV]

You could ask the person or lot you bought the truck from or contact Baja Designs.

[@kevinbower7142]

roberto landa follow the wires

[@davidsoudek]

It’s solar

[@billybeast3814]

Does anyone know what tires those are?

[@RoughCountryTV]

+Billy Beast Those would be 295/55/20 Nitto Trail Grapplers

[@lennydonofrio2849]

Why would you show how to wire it???

[@matthewcleaver2493]

Why can't you run a double row light bar on this

[@RoughCountryTV]

The opening isn't tall enough

[@matthewcleaver2493]

+Rough Country ok thanks

[@skyrimfx8377]

What's the trick to install motor mount driver side 2013 Chevy Silverado 4by4

[@RoughCountryTV]

@Joshua Adkisson Unfortunately it does not, but if you're not already, you can subscribe to our KZbin channel and/or regularly check our web site at roughcountry.com for the latest product updates.

[@zacharyschwartz5701]

+Rough Country do you have common locations that you guys install switch panels for lighting in the 2015 sierra 1500. I have the all-terrain package and want to run several light bars to a inconspicuous, yet easily reached area by the driver.

[@coreyridings3397]

Shouldn't have to buy the bracket separate...

[@RoughCountryTV]

The brackets and mounts are sold separately since they are vehicle specific.

[@redlinepe3461]

won't the truck over heat

[@RoughCountryTV]

This setup does not affect the cooling of the vehicle. There is still plenty of ventilation for cool down with this setup.

[@mattberch9957]

Jeep sent me

[@RoughCountryTV]

Cool.

[@chevytahoe9430]

They forgot the wiring part 🤣🙄🤦‍♂️

[@darkzero11ca]

Bull shit its not that easy. Unless my brother-in-law got a bad batch of the light bar frame.

[@glober8]

No wiring video? 👎🏻👎🏻

[@RoughCountryTV]

There are dozens of different ways to run the wiring. We leave that up to you to choose the route you'd like to take.

[@hatchetrida84]

Not worth it. Not hard to install. But it will start holding condensation after 2 months and burn out after 6. Not worth $150 plus another $35 for the mounting bracket. Wish I had another option

[@RoughCountryTV]

We've made improvements to our LED light bar design over the years to prevent issues specifically like holding condensation and we stand by our products with an industry leading warranty. Give us a call at 1-800-222-7023 during regular business hours and we'll do our best to get you taken care of.

[@RoughCountryTV]

We've made improvements to our LED light bar design over the years to prevent issues specifically like holding condensation and we stand by our products with an industry leading warranty. Give us a call at 1-800-222-7023 during regular business hours and we'll do our best to get you taken care of.

[@coryt-notctk6822]

Does this work on the same truck but 2500HD

[@mauricioarango5925]

Is possible fit 22inches

[@RoughCountryTV]

22" would be too long for that location.