Installing 35-inch Tires on a 2025 Toyota Tundra with No Lift

[@llllIIIlllIIIIl]

Dont listen to the debbie downer, these videos are still nice to see and anyone researching on what tires to upgrade to should be watching multiple videos for different perspectives before pulling the trigger

[@Franco.ca.]

Bro, thank you. Been looking for this fitment

[@blakebiltwell5]

Thanks for sharing! I’m planning on stock wheel no lift with my 23 platinum with 33” all terrain tire. In your opinion, what all terrain tire brand is the most quiet on the road?

[@PRO4XKEV]

Looks really good. They should have removed the tire decal tags.

[@CarlosWadeMusic]

Anyone know the offset on these wheels and the stock SR5 wheels?

[@Cami-lo6ws]

What are the actual measurements of those 35’s?

[@cortem762]

How big of a tire would my stock SR5 rims go up to? Is there a difference other than look? 33 inch would be great.

[@shundashundalah]

They do fit. I have 33s on 20 inch TRD wheels on my 22 SR5 with a lowered kit

[@mervinblack1]

Umm? I just want to know what's the Largest Toyo open country R/T Trail I can get away without rubbing? Current 2024 1794 Tundra with 18 inch TRD PRO BBS rims.? I don't do heavy little wheeling... Both pave and dirt rough -ish roads.. Here in Colorado and down in Baja..I'm running stock with ADS/ suspension. Trying to avoid using any lift kits or wheel spacers. Thanks..

[@Runnin4Tacos]

R/T wheels and you do some wheeling. I would probably go with 33s.

[@Tundra-me4wt]

34x11.5x18 would be a good size.

[@theirthereandtheyre2947]

What about the spare ? Will a 35” fit underneath ?

[@jonathandejesus9494]

lol no, not even close

[@korbekleeninc.974]

I have a 285 75 r18 in my spare tire holder it barely fits. that's 1/4 inch shorter than a 35

[@rlaracue]

I have a 23' 1794 with the TRD 3" lift kit. I am running MT Baja Boss ATs. 35x12.5x18 on a Fuel wheel with a +20mm offset. I am rubbing the front sway bar at full lock (both directions) going forwards every time. How can this be vs what you are seeing with the stock wheels on your Tundra? Do I need more of a postive offset lol or do I have an alignment issue? Thx

[@korbekleeninc.974]

I have a 24 3" lift in the front 1.5 lift in the rear 1" spider trax wheel spacers. running 285 75 r 18. took the front sway bar off before the lift was installed

[@Runnin4Tacos]

That is interesting. AT and +20 offset should clear easy. Double check the wheel offset? We had a customer with a tundra last week that bought his own wheels and was also rubbing. He ordered + wheels and they send him 0. He didn't even check until we looked at it.

[@rlaracue]

@@Runnin4Tacos I dont think they are the wrong offset but I will take a look. Thx. I tried 0mm and they rubbed badly in the fron of the wheel well. Which again was odd bc I have seen people run 37s on 0mm offset and not rubbing in the front. I think the Toyota dealer is doing factory alignment numbers and not taking into consideration the size of the tire or the wheel offset.

[@Runnin4Tacos]

@@rlaracue That is also weird because the tundra in this video came straight from a dealership to get this done. We did not do the alignment on this truck at all.

[@mfa81]

Toyos are smaller than the label size, they are more like 34.5

[@MH_6160]

Do 37"s

[@tzxsr]

Will this fit the sequioa? 2024?

[@GeezMo76]

You mean 34.5 not true 35's

[@a-teamIL]

Bruh! You need to figure out how to keep that camera still instead of spinning around in circles. Getting sick ... 😉😉

[@L-Thong]

Am i tripping or did your tire guy just raw dog the wheel removing and mounting tires? If this is a 2025. Its brand new. With marks on the wheels? Lol.

[@cobratuner]

I see what you’re talking about but it just looks like the lube they apply when mounting.

[@L-Thong]

@cobratuner i hope so man lol.

[@Runnin4Tacos]

That is tire lube.

[@L-Thong]

@@Runnin4Tacos yea man. I couldn't tell. Had to ask lol

[@BlueSTI]

🤦‍♂️this is old news on what tires will fit stock lol

[@Canto831]

Yet, you still clicked the video and left a comment.

[@killabandit]

Not many have done it with no spacers or lift.

[@stevencheng5722]

​@Canto831, that's what I'm saying. LOL he's a troll