Installing $36.99 Underglow Lights on Ryker

[@BLRTUNING]

Just wanted to reach out to you and say great video. I love seeing people do stuff on KZbin. With that being said please keep in mind this is why we created our stealth LED kits that come with toggle switches. This led kit you installed will 100% kill your battery if you let the bike sit. It may not happen overnight but eventually it will happen and as soon as you end up having battery issues just understand that it is definitely 100% your LED lights that you just installed. The reason it will kill the battery is because that module, when it's hooked up straight to the battery is constantly looking for a signal from the remote. This means it is constantly drawing a very small amount of current. Hopefully people see the comments. A lot of people leave their ryker parked for the winter months depending on what area they live in. It's never fun coming out to start the bike after it's been sitting all winter only to find a dead battery because of the LED light kit you installed. Great video,,, I just hope people don't get the wrong message. Keep up the great work. Can't wait to see the next video. Subscribed with the Bell on! Bill - BLR TUNING

[@nicoleorozcorealtor]

Maybe but I never had issues with them draining mine myself and during winter you are supposed to put a battery tender on it anyways. Thanks for commenting!

[@BLRTUNING]

@@nicoleorozcorealtor what's really good news I'm glad you haven't had any issues with them. Yes you are 100% correct always put the battery on a battery tender if it's going to sit for any longer than 2 weeks.

[@anthonybertram7042]

I've got same light and bought an accessory plug from slingmods so you don't have to connect to the battery. Plugs in behind fender.

[@jdjackson03]

Thank you for this video. Did mine in under an hour. Can’t believe the money you just saved me. Thanks again!

[@nicoleorozcorealtor]

You are welcome!

[@josephperez255]

Finally a step by step on this lights thanks for this video ryker looks awesome

[@nicoleorozcorealtor]

Thank you!

[@imasoundgod]

I appreciate your willing to show us where to put these. I hope that people do not break panels by not using the proper techniques of removing them. But, all in all a great video!

[@Cuttymane-nz6po]

This is the best cheapest I done seen great video

[@giovannam925]

This was awesome!!!! Owned my Ryker for 3 years now, still no underglow yet, lol. Nice instructions

[@nicoleorozcorealtor]

Thanks! I love having it at night it's so cool! Time to get one!

[@inyourseat]

Just followed your video start to end I GOT LIGHTS LOL awesome presentation

[@nicoleorozcorealtor]

Yay awesome !

[@swaggatite21]

Hey u watched your video maybe 10 times. It was very useful and helped me install my lights on my bike. Thank you so much

[@nicoleorozcorealtor]

Awesome!

[@crobinson918]

Thanks so much for this video. you gave me the confidence to do this my self for my birthday this weekend.9/18/72. you officially HAVE A NEW SUBCRIBER

[@nicoleorozcorealtor]

Haha thanks 😊 it's pretty easy! Now I have a Spyder and have to figure this one out lol

[@pbthicc8880]

Best video!!! About to install my lights now

[@nicoleorozcorealtor]

Thanks! Good luck!

[@MsSemperfi80]

Wow. You make it look so easy. Just got my lights today. Can’t wait to install them. Fingers crossed.

[@nicoleorozcorealtor]

Message me here If you have any questions it is pretty easy

[@rickgarcia8481]

Great job explaining and showing... Looks great.

[@nicoleorozcorealtor]

Thanks!

[@JSmooth570]

The headlight led needed to be mounted under the headlight covers pointed down inside the headlights but other than that thumbs up . That can be fixed with by just unsticking them and adding some new double side tape and relocate them

[@nicoleorozcorealtor]

You can't do that because the tape is already on it. If you would have taped it under the headlight it would he facing down not up. Slingmods has a video of theirs and they mount theirs on top facing down but it works fine this way. 👌

[@JSmooth570]

@@nicoleorozcorealtor you dont tape it under the headlight it tapes under the top cover piece. It is your if you like it that is all that matters. I just noticed it at the end when your head lights were not bright enough lit that's all. I just ordered my led kit so I'll be installing it soon.

[@nicoleorozcorealtor]

If I recall it doesn't fit or something under that area. I believe I tried it. I can look again.

[@JSmooth570]

@@nicoleorozcorealtor it's fine it's just my OCD. It just tapes in the exact spot you put it but just facing downward thats all

[@grettamax1]

Thank you for sharing! I've checked shops and individuals. Too pricey to have them installed. I know I can do it now! Thank you..thank you..thank you!

[@nicoleorozcorealtor]

Yes it really is easy! Hope you get yours on soon!

[@grettamax1]

@@nicoleorozcorealtor just got to last strip under foot pegs. Now all lights not coming on. Only strip working now is the other foot peg. They all were on in beginning. What did I do wrong ?

[@nicoleorozcorealtor]

@@grettamax1 I have no clue. If all are plugged into the main box and hooked to battery they should all come on once the remote is turned on. If only 1 light is coming on and none of the others will and they are all plugged into the module then I am guessing the module may be bad.

[@grettamax1]

@@nicoleorozcorealtor ok. Thanks. Reorder from Amazon.

[@nicoleorozcorealtor]

@@grettamax1 try to make sure all connections are good

[@rosslynnjohnson7855]

Great video! Thanks for doing this

[@sJ-bb8lr]

Finished my install and thanks for the tutorial....

[@nicoleorozcorealtor]

Awesome! You are very welcome

[@laughatduu2231]

i did mine today i wish i can send you the video , mine took more time i installed the grill lights behind my grill so i had to fight with that part but great video & instructions

[@nicoleorozcorealtor]

Awesome!

[@BlakWiseCracker]

You’re definitely an awesome teacher and your work is above all phenomenal..” 😎

[@nicoleorozcorealtor]

Aww thank you very much. I know some videos are hard to understand or they skip steps etc and you want to pull your hair out. So, I tried to be quick but make it easy also. Glad it helped!

[@glennredmon7871]

Awesome im ordering mine today ty for the video

[@nicoleorozcorealtor]

Welcome! Good luck!

[@xPL4R]

As a mechanic , when you drilled the torx bit screws into front lid to get the thread i died inside a little bit but awesome video with quick install !

[@nicoleorozcorealtor]

I don't get it lol not sure what you believe I did wrong but whatever it was it worked haha

[@maggie4475]

looks Amazing great job... love the RIDE..

[@nicoleorozcorealtor]

Thanks!

[@beardrn]

Thank you for the instructional video

[@sleepinglion8190]

Hi. Can you tell me the brand name of the LED lights?

[@dragon60651]

I like the chaser lights better

[@gregnutter4658]

Great video. I like the way you showed us how it's done. How are the lights holding up. Have you had any issues with them.

[@nicoleorozcorealtor]

No haven't had any issues.

[@troy9er]

Looks good, and that’s quite a savings!!! 👍🏻

[@songjames4609]

You did a great job... Thanks and TricLEDs are so over priced

[@nicoleorozcorealtor]

Thank you!

[@chrisjackson5107]

Definitely preciate this video and you did a amazing job...so easy thank you 💪🏾💪🏾💪🏾💯💯💯

[@nicoleorozcorealtor]

You are very welcome. Glad you could understand me lol

[@chrisjackson5107]

@@nicoleorozcorealtor oh yeah you did that 💯💯💯

[@Casinochris24]

Hello i have the same lights. My battery is dead i think its the cold but now i got a code vss fualt

[@nicoleorozcorealtor]

They normally come w cheap batteries if you have it on a trickle charger and it keeps going dead you need a new battery. My friend has the same lights and it was her battery not the lights. She got a new battery and it has been fine since.

[@RollingOn3]

Good job

[@terryreilley]

Did you not use any primer on the plastic parts after cleaning with alcohol? I didn’t see you use any, so I’m guessing no. Have they stayed on well?

[@nicoleorozcorealtor]

They stay on perfect. Nothing else besides alcohol

[@terryreilley]

@@nicoleorozcorealtor - Awesome, thanks!!!

[@rodswanson1505]

Hey Nicole you're hella of a light installer nice job mam

[@nicoleorozcorealtor]

Thanks lol

[@sJ-bb8lr]

Which set did you purchase ? I found the 36.99 price not sure if it is compatible? Great job btw!!!!

[@nicoleorozcorealtor]

The links are in the description

[@sJ-bb8lr]

Thank you

[@courtneyknight608]

Could you do mine? lol you did a amazing job. also provide a link for the lights?

[@nicoleorozcorealtor]

Yes the link is in the description thanks!

[@courtneyknight608]

@@nicoleorozcorealtor thank you

[@courtneyknight608]

dang sold out I'll have to find another set.

[@nicoleorozcorealtor]

Both links?

[@nicoleorozcorealtor]

The 2nd link I posted isn't sold out

[@alby2die4]

Do these lights have the Knight Rider KITT effect?

[@nicoleorozcorealtor]

Um I would have to check lol it does have a lot of strobe effects etc.

[@vanessareally]

Where did you get the connector with all the outlets? How many available plugs? I ordered a 4 plug connector from Slingmod, but I want to use more than 4 lights.

[@nicoleorozcorealtor]

The 36.99 kit from Amazon that is linked in the description comes with everything. Not sure where you can buy that part separately.

[@elove5012]

Good job 👍🏿

[@vttest8793]

Great video. I clicked on the link and it says it cant find it. Can you re-post the link? :)

[@nicoleorozcorealtor]

They must have sold out haha this looks to be almost exactly the same set.. www.amazon.com/Nilight-TL-42-Motorcycle-Waterproof-Multi-Color/dp/B08M31KKN2/ref=mp_s_a_1_12?dchild=1&keywords=8+pc+motorcycle+led&qid=1629215192&sr=8-12

[@dericmcgee8985]

What fuse goes in there

[@nicoleorozcorealtor]

There is no fuse.

[@burn1gotbeats]

Nice

[@raymondrivera9251]

Hey what is the name of the set Great job

[@raymondrivera9251]

And price

[@nicoleorozcorealtor]

The link is under the description for them. 36.99

[@raymondrivera9251]

Dum question price was in the title smh sorry

[@raymondrivera9251]

Thank you

[@ryker4124]

Illegal to run red or blue up front or blue in the rear.

[@trekirby8242]

How is this with the battery?Does it shut off with the bike or does it need to be unplugged when not riding?

[@nicoleorozcorealtor]

No you do not unplug it, it comes with a remote. You turn them off with the remote when you park your trike/bike. Then turn them on with the remote when you want them on. Thanks!

[@rykerbill6832]

Nice job

[@nicoleorozcorealtor]

Thank you!

[@Lotto832]

Thank you!

[@nicoleorozcorealtor]

Welcome!

[@FASTLANETV14]

New SUBSCRIBERS

[@alfredlee2668]

Do every thing u need come wit the lights.

[@nicoleorozcorealtor]

Yes

[@alfredlee2668]

@@nicoleorozcorealtor Ok thank you wonderful video

[@nicoleorozcorealtor]

Thank you

[@salimfaysal6651]

🔥🔥🔥🔥🔥👍

[@broderp]

This video clearly shows the issue when a non-technical person thinks they can make a proper installation video by coping what others do on the internet. Whats the issue? All ill tell you is to google paeasitic draw and to think about what it is to be human and to forfet things.....good luck.

[@nicoleorozcorealtor]

What is your point. You turn the lights off when you turn the bike off. Never had a dead battery or issue. Have a great day !