Can-Am Ryker Chaser LED Wheel Light Kit (Installation)

[@Slingmods]

🛒Can-Am Ryker Chaser Wheel Light Kit available here: www.slingmods.com/canam-ryker-magic-chaser-wheel-light-kit 🛒65mm Wheel Nut Socket available here: www.slingmods.com/canam-ryker-rally-wheel-nut-removal-socket-tool

[@MBFITNESS334]

Just finished installing my Chaser Lights. Thanks again Brandon.

[@Slingmods]

Awesome! Glad we could help.

[@medina8050]

Is there a solid Orange or pulsating orange color on this light kit

[@sandramckee6422]

How long was the installation.

[@RomanVymazal]

love the product intro with the video manual

[@Ben86511]

Okay, this might have just solidified my decision to get a Ryker.

[@DJMontePGH]

For real! This is sick!

[@williefonte23]

EXACTLY!..... I am going to MAKE SURE that I get this EXACT SAME RYKER & COLOR! I will NOT paint or wrap my bike other then add accessories & these lights

[@SuperAndrey33]

I just bought brand new 22 rally with bunch of extras lol

[@pamelawade7942]

I want this for my rally one day.

[@shadowsiren3058]

You guys make the best accessories known to man for can am rykers. Dont stop making videos of rykers

[@Slingmods]

Thank you! We absolutely love the Ryker and have a bunch of mods in the pipeline that are in development. Thx for watching!

[@Doyle907]

I'd want to put the 3m LED strips on the rings before putting them on making sure their going the correct direction/location of course. It would be so much easier for me up on the table

[@Slingmods]

For sure, totally up to you! Thanks for watching.

[@Otterbruce]

Yes that was exactly what I was thinking to. Easier to stick on the lights on a bench rather than under the fenders.

[@erdogankocams4514]

Thank you Brandon .. you r the best

[@roflstomps324]

That's me penniless come February... 2022 is on the way.

[@RollingOn3]

Dam you guys digging into my pockets 💵

[@thasfun]

Right!😂❤

[@quyenbui2263]

I like the riker hood ... place led in those slots and it would look like a snake head when the lights are on lol

[@khaywening8921]

It looks so pretty I love it you do a good job thank you👍🏽👍🏽❤️❤️❤️❤️❤️❤️❤️

[@MrBTRDAYZ]

How come the led strips are not pre-affixed to the wheel ring or built into it? (BTW: Really nice install video!)

[@Slingmods]

Thank you! The wheel lights are not permanently affixed to the wheel ring in case there is a light strip that gets damaged. If that were to occur you could remove the led strip and replace it without having to remove the entire wheel ring assembly.

[@justingordon2293]

Cop'n these kits for my bikes

[@IsaiahSmith-t3w]

Question, could you attach the LED strip to the wheel ring before attaching the wheel ring to the bike?

[@Slingmods]

Yes, just make sure that all your strips are facing the same direction so that the chaser lighting sequence has uniformity across all wheels when illuminated.

[@MBFITNESS334]

Fantastic. DYI. Thank you Brandon. #slingmods

[@Slingmods]

Thank you!

[@Lotto832]

Can you put the led lights on ring before you put it on the bike?

[@Slingmods]

I suppose you could.. but the reason we don't recommend that is because the light strips need to be adhered in the same direction on all 3 wheels so that the chaser lighting effect looks good. If you were to adhere the strips backwards on the wheel ring and then install.. the effect of the chaser feature would not look nearly as cool.

[@beataddict5475]

Oyea that's a frikkin project. I really like it tho. I would pay someone to do it

[@Slingmods]

For sure, if you're not comfortable installing this mod.. it'd definitely be best to have it professionally installed. This video should be a great resource for your installer, both as a guide for the installation itself as well as a tool to help them provide you with a labor quote prior to you dropping your bike off. Thanks for watching.

[@TerrellRiFic3]

My Ryker gonna be lit up like a Christmas tree coming down the road...

[@Slingmods]

Lol! Yes sir.

[@dredre3550]

Will one remote control both sets or we still have to use each remote?

[@Slingmods]

Hello Dre, all of the Under Glow Chaser Kits are controlled with one remote control. Thank you!

[@michaelgruber1964]

I can't wait to get my ryker and start installing mods lol

[@Slingmods]

Feel free to call anytime with questions.. we're happy to help! Thank you.

[@bettysmith4527]

which one did you order Michael? I am torn between the 900 and the 600.

[@LarryMccrae-vw3ke]

Love how to order it I want it❤

[@Slingmods]

Here ya go: www.slingmods.com/index.php?route=product/search&search=underglow%20ryker :)

[@latoyahaskin351]

Do y’all have a store in Arkansas where we can bring our Ryker and you install all of this for us

[@Slingmods]

Hello Latoya, as much as we'd love to help you out with that.. we do not provide installation service. I would however recommend sending our video link for the mod you're interested in purchasing to your local auto / stereo shop. They should be able to provide you with a quote for the installation after watching the video. Please let us know if you need anything else. Our customer service team is also available if you have any further questions at 800-211-1396. Thank you!

[@bigjrock05]

Could you out the strips on before putting it on

[@Slingmods]

You could for sure, you just have to make sure they're all facing the same direction.

[@nikkirg6405]

Will this work with the 3-Piece Touring Saddlebag & Top Case Luggage System with LED Running, Brake & Turn Signals??

[@Slingmods]

Hello Nikki, yes.. both the Chaser Wheel Light Kit and the 3-Piece Luggage can be run on the same bike.

[@shadowsiren3058]

I have a question how do you find a professional to install lighting for can am rykers?

[@Slingmods]

I would try both your local Can-am dealer as well as automotive performance shops in your area. If you provide them with our video link, they should be able to provide you with a labor quote ahead of time.

[@PhantomFox1]

Need this for F3 limited!

[@Slingmods]

That's coming as well. We'll be launching the Spyder wheel light kit next month. Stay tuned...

[@sandramckee6422]

Can I jack all 3 wheels up after loosing the lug nuts and Then install the kit?

[@Slingmods]

Hell Sandra, If you're using the proper jack points, you can do that if you prefer. We personally prefer to do one wheel at time.

[@MasolYounglll]

Is this the same for rh3 trike Harley

[@Slingmods]

No, I'm sorry. This kit is designed specifically for the Ryker.

[@SgtJamesRay]

Will it ever come for the 2019 F3-S?

[@Slingmods]

Yes, we're working on this video now actually. We're hoping to launch by the end of July 2022. Thanks!

[@williamsnyder4244]

Installed Kits 1-3 with no issues. Look great!! After installing the wheel light kit, those lights flicker. Also, when I turn the lights off, 2 strips remain on fir a few min then turn off. Any advice? These lights are so 🔥🔥🔥!!

[@Slingmods]

Hello William, if you could please email our support team with a small video of what you're experiencing. We're glad to help resolve any issues. Here's a link to do that here: www.slingmods.com/index.php?route=information/contact

[@williamsnyder4244]

@@Slingmods Will do…appreciate the support!

[@shaunparker]

Can these be hooked up to the adapter accesory instead of the battery?

[@Slingmods]

Hello Shaun, these would need to hooked either directly to the battery for power or to an aftermarket fuse block. The accessory power port on the Ryker would NOT be sufficient for this lighting mod. Thank you!

[@shaunparker]

How can I keep it from draining the battery?

[@Slingmods]

@@shaunparker To avoid a parasitic draw, you can either connect power to an aftermarket fuse block and/or be sure to keep your battery on a battery maintainer like these: www.slingmods.com/can-am-ryker-battery-chargers-desulfators

[@wokeupmens]

Help: Whats the torque specs for the inside the wheel well swing arm bolts after you loosen them to install the rear wheel ring? Can't find them anywhere.

[@Slingmods]

Hello, please shoot us over an email with a pic of what bolt you're referring to and we'll look it up in the shop manual for you. You can submit that support ticket here: www.slingmods.com/index.php?route=information/contact

[@georgemarshall5053]

If you find out, can you post it here?

[@dperry7830]

Is this, as well as the under glow lights, compatible with the accessory wheel fender ports?

[@Slingmods]

Hello dPerry, both the wheel light kit and the underglow kits are powered directly from the battery. You can review further elaboration on this here: 27:49 . Please let me know if you have any other questions. Thanks!

[@Stuntingonmycanam]

Please make it for Can Am Spyder.

[@Slingmods]

Absolutely. We'll be launching next month! Thanks!

[@wylstar]

Is it legal to run with these lights on? I'm in Arizona

[@Slingmods]

Hello George, I'd definitely suggest you check your state & local laws for the answer to that question. I would assume the answer is NO as these were intended to be used at bike nights, shows, etc.

[@BigPoppa529]

Looking for chaser lights for can-am Spyder or will these work

[@Slingmods]

Hello Kenneth, we have chaser wheel lights & underglow kits coming out for the Spyder models shortly. Stay tuned...

[@davidparker7712]

Following

[@rabbit42007]

wouldn't this be easier to apply stripes before putting on bike??

[@Slingmods]

You could but you need to make sure that the chaser strips are all firing in the same direction or the chaser effect will not look right. We found it easier to install the ring first so that you're not having to deal with the dangling plugs while installing the ring.

[@bettysmith4527]

Will a dealership install this stuff, or you have to do it yourself? I am not mechanically inclined and have no interest in that sort of stuff.

[@Slingmods]

Hello Betty, absolutely! We have a lot of customers that have us ship their items to their local dealership for installation. Our Customer Service Team is always standing by to assist you with any questions you may have. Consider us your personal concierge team! We're available at 800-211-1396 Mon-Fri 9am-5pm PST. Thanks for watching!

[@djihn13]

Do you have these available for the spyder f3-s?

[@Slingmods]

Hello Bernardo, we'll be launching the Spyder kits in July. Stay tuned...

[@Ryder1_MoraleOfficer]

Is this legal in California? Thanks

[@Slingmods]

Hello John, not while riding.

[@atticaburns6358]

Where can I go to get this installed

[@Slingmods]

Hello Attica, you would need to contact a local automotive shop in your area that installs aftermarket parts. You can also contact your local Can-am dealer and speak with the parts or service department to see if they're interested. This video will be a great resource for whoever does the installation for you. It will also allow you to obtain a labor quote prior to the installation appointment. Thank you!

[@Papa.oscuritaa]

Is there anything for the f3?? Like under glow

[@Slingmods]

Hello J, yes... the F3 Underglow and Wheel Light Kits are on the way. I'm hoping to launch the wheel light kits next month for both the F3 & RT! Thank you!

[@medina8050]

Can you and would be easy to have the wheel ring on a table and just put the LEDs on the ring .. instead of doing it the way you did it in the video tight spaces for the front Wheels inner LEDs

[@Slingmods]

You could.. but it's imperative that the LED's strips are all applied facing the same direction or the Chaser feature won't look right when illuminated.

[@jclar3565]

The cops would never go for that in my state

[@YMBQuez]

If they flashed with the turn signal on corresponding side and turned red with the brake it would be better

[@Slingmods]

You don't want to have brake lights on the "side" of your vehicle as other motorists are expecting to see brake lights at the rear. That would disorient drivers at night and could be quite dangerous for you as a rider.

[@scooterssolesteppers304]

Will that kit go with a can am syder rss style

[@Slingmods]

No, this kit was designed specifically for the Can-Am Ryker & Ryker Rally.

[@scooterssolesteppers304]

Can your company make a rings for the can am spyder rss style..can I have some made..

[@Slingmods]

@@scooterssolesteppers304 What year is it?

[@scooterssolesteppers304]

It's a 2012 can am style

[@scooterssolesteppers304]

2012 can am spyder rss style

[@732marine]

Why don't you install the leds on the rings first then put it on the wheel

[@Slingmods]

You could but you need to make sure that the chaser strips are all firing in the same direction or the chaser effect will not look right. We found it easier to install the ring first so that you're not having to deal with the dangling plugs while installing the ring.

[@christinaarroyo7953]

Can these light be controlled by an app?

[@Slingmods]

Hello Christina, they cannot. They're controlled with the remote control.

[@justingordon2293]

Do you guys offer additional LED strips that be can be added to other locations (around the seat ), and still sync with the undercarriage and wheels ???

[@Slingmods]

Hello Justin, we have these: www.slingmods.com/can-am-ryker-underseat-run-brake-turn-signal-led-kit-tricled , but they're not synced with the UnderGlow Kits.

[@rakanhaddad2003]

Sponsor me Send me one of these kits and I’ll throw it on my bike and do reviews 💪🏼

[@talonblack8250]

Ok... Why didn't you just put the led strip on the ring before you attached it. It would have been easyer.

[@Slingmods]

You can, but you need to make that they're all facing the same direction or the chaser LED lighting effect will not look good.

[@justingordon2293]

Is it me or does bro sound like a strip club DJ

[@Slingmods]

Lol. I'll pass that on.

[@royword176]

What if you have the 22 Rally white rims?

[@Slingmods]

Yes, these are compatible with the 2022 Rally Rims: www.slingmods.com/canam-ryker-magic-chaser-wheel-light-kit