Installing a bigger steering damper on my electric scooter

[@Syncere20]

Very good engineering skills

[@TheBuell49]

Yea I just installed one made for C frame scooters I bought and installed it but the mounts are made of aluminum. I think they need to be steel. This is why I ask. My scooter has very similar mounting points thanks David

[@sergiopetternella]

Brand, site ? Name? Specs ?

[@kristianrelloma9408]

Where to buy that bracket?

[@RgbWave]

Hey, i made it myself using a 10mm screw with a ring on it, 10mm long nuts for strenght so it doesnt bend

[@kristianrelloma9408]

How long the screw ring? That looks sturdy.. my bracket was broken and i cant purchase the bracket anywhere 😢

[@RgbWave]

@@kristianrelloma9408 the inside of the ring needs to be 8mm, look on AliExpress there's stuff you can buy there

[@GhostAreReal6]

It's always a good idea to add blue loctite so the bolts don't become loose due to vibrations, what fisheye bolts are they? they look more sturdy.

[@zanthonyhill8818]

I'm curious as to how it rides at LOW speeds with the damper. I recently got a Zon Doo scooter.......duel motor......2800 watts each,5600 watts total. Top speed supposed to be 52 miles per hour. It came with a damper already attached. I took it off to see how it rode....big mistake....it's unridable without a damper. I put the damper back on,but the steering is so stiff. Yeah....I can get up to 45...50mph with no wobbles,but it's so stiff...it's a struggle even trying to make small turns. I just wish there was a way to make turning at lower speeds be not so difficult,while still keeping the stability at higher speeds.

[@RgbWave]

Hey, the damper should come with a little wheel that u can adjust the damping resistance, just like i showed in the video

[@ymx777]

Hi. Are the bolt size the same for all dampers, include motorcycle dampers? Thanks.

[@RgbWave]

Hello, yes they are, 8mm bolts

[@Meribijali]

Oder now please link

[@truthsquestions1532]

Nice 1. Where can i buy that black bigger steering damper from please

[@RgbWave]

From aliexpress, search for “342mm steering damper” you will find it

[@TT-ky2gj]

Buenas que tornillos utilizaste para montarlo? Y tipo de arandelas que tengo el mismo modelo y quiero

[@RgbWave]

Hey, i used m8 washers and m8 bolts

[@MPCLiveByTravis]

Hey, what value did you set your steering damper to? Is it at 1, 2, 3, and so on up to 16?

[@RgbWave]

@@MPCLiveByTravis hey, i usually keep mine at 6 or 8 but thats personal preference

[@TheBuell49]

Hi, I was wondering wear you got those steal mounts for the dampiner?

[@RgbWave]

Hey, i bought some bolts and nuts, i custom made for my scooter

[@TheBuell49]

@UnboxWave got it. Thanks for your time

[@Kolors_of_lyfe]

Takes some getting used to,high speed feels more confident but My steering dampers reduced my max steering angles in tight corners now i have to put my feet down because im no longer nimble 😅

[@kennethanciado7474]

Can you recommend one for weped fold?

[@RgbWave]

I reccomend buying the Weped EREXX damper, its very pricey but has very nice aesthetic and performance, erexx.co.kr/shop_view/?idx=17

[@TT-ky2gj]

Y el diámetro del tornillo el ojo?😊

[@RgbWave]

Its 8mm, the bolts, the nuts and the washers u need they need to be 8mm diameter ok

[@kennethvilla311]

Where can i buy the connectors for the dampers?

[@RgbWave]

Hey, i bought them from a store nearby but you can try to look on amazon or aliexpress, the screws are M8

[@Thatonescooter_kid]

Does the steering damper stay straight? Like for example my steering damper the bearings are super stck

[@RgbWave]

@@Thatonescooter_kid well, it doesnt stay straight, mine is also stiff but not much, maybe the oil inside is not good, i had to replace mine cuz of that

[@Thatonescooter_kid]

@@RgbWave the damper itself is fine. But it’s the bearings at the back of the rod and the bracket part.

[@RgbWave]

@@Thatonescooter_kid Oh i understand, it depends, my old one was like butter, the new one is hard to move them, but it works fine for me, but they shouldnt be super stiff

[@Thatonescooter_kid]

Do they play any importantce in the function? Like do they need to move or are they there for comfort do you know?

[@RgbWave]

@@Thatonescooter_kid I dont think it makes a huge difference, but i suggest you leave a little gap so it can move on its own around the screw, dont tighten the nut too much, u dont wanna crush the bearing, that way it wont move around the screw, it will be stiff

[@oklahomascootin]

What scooter is that

[@RgbWave]

Its a laotie es19, it looks a lot different now, did some mods on it

[@oklahomascootin]

@RgbWave kinda looked like the nanrobot but that's sick looking bro

[@nicolaspirat1989]

👍👍👍👍👍j ai fait pareil.😁

[@hugoconchinha6704]

Já dá para fazer uma rotunda em condições ahahaha

[@RgbWave]

E uns peões 😂

[@joao_ricardo9836]

acho que o choculauuuu vai se matar nesta merd* xD

[@michaelbennett8211]

Hi. I’ve been looking for an steering damper. Do you know if they have one for the MaxFun 10 pro or a universal one?

[@RgbWave]

Hey, add me on discord, i make them myself discord.gg/6ywYj6Up

[@michaelbennett8211]

I can’t message you I don’t know why