Installing a co2art Pro SE and Pro Elite regulator for your aquarium

[@bettabegoodjr2104]

The best setup done right!!!! A lot of people with working pressure valve don't counter clock wise turn to decrease pressure before opening Maine tank valve and they blow there gauges..... ty for video

[@Mixa2025]

This is very helpful video. Thanks!

[@SupTJay]

I spent hours seeking this info before finding you. Thanks so much

[@TwilightRests]

This was an amazing and insightful video, thank you so much! Just the help I needed.

[@berto3113]

best up to date video for CO2 art, thank you!

[@henrykater9728]

This was very helpfull thankyou. Just bought one of these, no product manual - was mystified. You have explained how it works. The big black knob under the gauges, HI-LO, was my problem, which way to turn and why. Now I get it.

[@keagansilas2259]

i guess Im randomly asking but does someone know a trick to log back into an instagram account?? I was stupid lost my account password. I appreciate any tips you can give me

[@westonzayd737]

@Keagan Silas Instablaster =)

[@keagansilas2259]

@Weston Zayd Thanks for your reply. I found the site on google and im in the hacking process atm. I see it takes quite some time so I will get back to you later when my account password hopefully is recovered.

[@keagansilas2259]

@Weston Zayd It worked and I actually got access to my account again. I am so happy:D Thanks so much, you really help me out :D

[@westonzayd737]

@Keagan Silas Glad I could help :D

[@ChanArcade]

Thanks for the video, just got my PRO SE and this helped a lot.

[@tthimsel]

The best installation guide! Thank you :)

[@hhinojosareef1]

Nice I just picked one up myself. Enjoyed the video! Keep them going. Thanks subbed!

[@bettabegoodjr2104]

I get mine in a week!! I can't wait.

[@jamiek3326]

Totally new to co2, mine just came in today. I purchased the inline diffuser after some research. Could you maybe do a video on how to set that up in my tank?

[@fitlit]

Thank you for explaining everything clearly.

[@ambermeows150]

Hi thank you for doing this guide! I’m looking to purchase the co2art kit but I don’t know where to buy a compatible tank for it. I live in the US, can you please let me know where I can get an affordable tank? Thanks!

[@ThereseNeal]

Hi there! So sorry I am late to reply, looks like I've missed several questions this year.. For a tank, you have a few options. You can shop online, keg or home brew kits for beer is one search. Amazon does also have sellers for empty tanks. You could also use soda stream or paintball bottles, though our regulator would require and adapter for those types. My fave place, and where I go for my needs, is my local fire extinguisher service company. Here, they service city offices and more, they will test tanks and fill them and they also offer fully tested, filled recycled tanks in a variety of sizes. If you cannot find one for your area, you could also look for a larger commercial filling company, like Airgas, where you can exchange tanks, sort of like propane tanks. Higher purchase for the first one, then swap out for an equal sized one as needed for a smaller fee.. Hope this still helps you! Just be sure the tank is for your region and matches the regulator threads, for us that is the CGA320 thread type.

[@shannonwilkerson]

Amber, I found my cylinder at a welding supply shop.

[@CF_Joel]

[Edit: Your latest video answered my question, haha! I like the o-rings way better… so far] Mine didn’t come with nylon washers. I got rubber o-rings. Is this instead, or do I still need to use nylon washers? It does have a much bigger groove than normal, that the o-ring actually snaps into.

[@ThereseNeal]

Yes we changed the washer style about a year ago. The black ones are the right ones for the current models

[@mafiotzi]

Thanks for the info, I have the new style with the o-ring and didn't know if I need a washer or not. I'm glad I ran into your video and this particular comment.

[@ashleyjones2727]

I purchased this kit and everything was going well, until I went to adjust the working pressure and the knob is doing nothing to increase or decrease the pressure... I’m all ears for troubleshooting suggestions.

[@privateportall]

Helpful. Thank you

[@Sincityraider]

Good instructional video. I'm looking to start using Co2 and have narrowed my selection down to Co2Art Pro-Elite and GLA Pro-DS...what's your experience with GLA products, warranty and customer service compared to Co2Art? Thanks

[@lovefishkeeping]

CO2 Art customer service is world-class! I have no experience with GLA CS but i can say that CO2 Art support is excellent.

[@Sincityraider]

@@lovefishkeeping Thanks

[@ThereseNeal]

Sorry I missed your comment and question. I do have experience with GLA, their product was my favorite and I recommended them until I started using the co2art Pro Elite. Once I set my Elite up, I sold off my beloved GLA. to say one is better than the other is difficult, really. They both work wonderfully. For the price point, Co2art for the win! As far as customer service, I am part of the customer service team now for Co2art and I think I do a pretty damn good job!

[@Sincityraider]

@@ThereseNeal Thank you! I appreciate you taking the time from your day to day life to reply back 🙏

[@ThereseNeal]

@@Sincityraider well of course! That's part of my responsibilities as one that posts videos, I think..

[@xisotopex]

looking forward to my co2art regulator arriving monday.... still wish they filled paintball with co2 around here, now have a lot of useless paintball can regulators

[@brents4225]

Nice. Thank you.

[@marcoquiroz4820]

Hi thanks for the video. I am planning to buy the Pro Elite for nano tanks (as says that work at min 5 liter tank), my question is: can you dial the needle valve to a range between 10- 15 bubbles per minute? Thanks

[@ThereseNeal]

Hi Marco, I apologize that I did not see your comment question until now. If you are still needing more info, please let me know!

[@rosidragon40]

I have 75 gallon tank with fx4 the intake is on the left also have a wave make on the on the right I have the outtake can I please the diffuser on the right side of the tank their is more water movement

[@Syrupmaker85]

Regulator is awesome, bubble counter not so much. It's plastic and tends to leak co2 and water if you don't use plumber tape when adding more water(weekly)...

[@urbansk8r231]

Hi, I have pro SE series CO2art regulator. how do you purge the excess co2 out of regulator when bottle is empty. Cause i heard you can blow the gauges if you have left over co2. Thankyou.

[@ThereseNeal]

When you need to change the tank out, close the main valve on your co2 tank. Then power on the solenoid, whether you have your bubble counter still connected to the tubing or removed, you can purge the gas by opening the bubble counter valve. It's faster if you have the bubble counter removed, you can hear the gas escaping. If you would rather do this when the regulator is not connected to the tank, you can. Just hold the regulator while you plug in the power to the solenoid, and the same thing. Open the bubble counter valve to allow the gas to escape from that valve. Once the gauge moves to zero on the working pressure (second gauge) then the gas is purged.

[@metallixro]

All the way from Europe thank you for this video! Do these kits include a check valve ?

[@ThereseNeal]

They are sold separately....

[@metallixro]

@@ThereseNeal TY was thinking the bubble counter is a check valve also.

[@ThereseNeal]

Yes you are absolutely correct!!

[@metallixro]

@@ThereseNeal Ok great then :) Lots of videos on these nobody mentioning heh

[@biswarup1234]

hi ..is there a way to connect extra manifold to Pro SE ? if not, how can i connect multiple co2 lines with the same regulator system?

[@ThereseNeal]

Hi. If you want to add on to the SE, you'll have to find your own parts since we do not build it for multiple manifolds. The thread size we use is 1/8 NPT.

[@biswarup1234]

@@ThereseNeal thanks

[@WilliamVG]

I'm new to co2 so please bare with me, the bubble counter on the co2 Art, does it have a check valve to prevent water from going back down into regulator when its turned off?

[@ThereseNeal]

Yes, yes it does!

[@hhinojosareef1]

First gauge by the solenoid is not working it just stopped one morning. I only used it for one month.. What could be the problem I have C02 i checked.

[@ThereseNeal]

So that could be a few different things. Do you hear the click from the solenoid when the power goes on, along with the red light? If that is ok, you can check the first stage area fir anything inside that might cause blockage, check out our support pages for the steps on how to access the first stage. It'll be in the FAQ section

[@pa7145]

Can you make a video that shows you setting it up in your tank?

[@ThereseNeal]

I sure can. What do you want to see exactly?

[@sushileafbeats]

Mine only came with black O rings instead of nylon washers. Is this gonna be fine?

[@ThereseNeal]

Yes, we did make a change for our newest models for the CGA version to use just the black rubber o ring we provide now..

[@georgeb8607]

Thanks for the video! What size cylindee did you use in the video? I need to fit the se and a cylinder in a space that is just 10" wide and have been trying to find the dimensions for the regulator everywhere

[@ThereseNeal]

The tank I used for this video is a 5lb, i believe. I can share dimensions if you'd like, we do have some stock photos on the website of the regulator dimensions as well. Thanks for watching!

[@georgeb8607]

@@ThereseNeal thank you for such a fast reply! Yeah dimensions would be super useful! Sorry I don't know what website you are talking about, so can't check.

[@ThereseNeal]

@@georgeb8607 oh sorry, co2art.us

[@ThereseNeal]

@@georgeb8607 ill measure the gas tank for you in the morning!

[@ThereseNeal]

@@georgeb8607 sorry my day got away from me, but I left myself a reminder note to do the measurements for you tomorrow...

[@Crackisntwack80]

I just picked one of the pro-se models up and I can get the tank pressure but no working pressure and no bubbles in the counter. Any suggestions?

[@ThereseNeal]

Does the power to the solenoid work? You should have a red light and heat a click sound. If not, reach out to us through our support portal at [e-mail]

[@ThereseNeal]

Or [e-mail] depending on your location...

[@Crackisntwack80]

@@ThereseNeal Yes it clicks and the red light comes on.

[@Kocht86]

Is there a link to the washers used?

[@ThereseNeal]

Hi Tyler! Hope you both are still doing well these days!! Which washers? The older one like in this video, I have extras I can send you. DM me with your address. I do not know the specific measurements for them, though we do have them for sale on our site. If it's the new black ones, I have those as well. Just for you!

[@Kocht86]

@@ThereseNeal I just ordered a PRO-SE Regulator, it seems to be running fine so far but I didn't have that white washer, is it absolutely necessary?

[@ThereseNeal]

@Trevor Koch the new ones no longer use the white nylon, we now use black rubber o rings. There should also be 1 extra inside the regulator box...

[@ThereseNeal]

Mistaken identity Trevor!! I'm sorry about that

[@jeffledford9877]

Audio is bad.

[@ThereseNeal]

Thanks for letting me know. I'll see what I can do to improve that.