CO2Art Pro-Elite Series Regulator and Manifold Installation Tutorial

[@rodclayton614]

I notice you have PTFE Tape on the bubble counter threads. There is an O ring that is supposed to prevent leakage. Do you recommend PTFE Tape as well?

[@topviewer1609]

Wish they would update.... the newer models dont match these instructions!

[@justbaquatics2512]

Great kit used on my tanks.....

[@co2art-com]

Thanks Just B Aquatics

[@shaon_rahman_khan]

@just b aquatics, how do you like it after 2 years of use?

[@justbaquatics2512]

@@shaon_rahman_khan great bit of kit I like it.

[@RedGalaxyFishbone]

Still using it?

[@seejus6131]

Any video on cleaning/removing the inline diffuser.

[@co2art-com]

Yes, here it is kzbin.info/www/bejne/r5O5XoemorxnkJI

[@emilyschaefer5981]

How did you pop that gasket on like that? My pro-elite regulator is flat there.

[@drea4066]

Did u ever find an answer to this?

[@emilyschaefer5981]

@@drea4066 apparently it has something to do with with the threading being different in different countries

[@co2art-com]

What connections do you currently have Drea?

[@drea4066]

CO2Art - Aquarium CO2 System Specialists managed to get it all set up. Thanks!

[@rafalmomot8460]

Is it possible to fix the regulator on the left rear corner of the cabinet or only right ?

[@co2art-com]

The regulator position can be anywhere. It depends on the layout of your other equipment.

[@sagarubharecreativity]

Does solenoid valve heat up

[@co2art-com]

Yes, you will notice some heat from a solenoid but nothing to worry about.

[@rj_aquascape4056]

Hi there if the electricity is off would the co2 system will run?

[@co2art-com]

hey, Good question. the actual fact is that the supply of CO2 will be cut if you loose electric supply to the solenoid.

[@rj_aquascape4056]

@@co2art-com that's was really helpful❤️ keep uploading new videos mate it's really useful

[@franckyrenaux6387]

Bonjour j'aurais une petite question le kit CO2 Art ça fait combien de temps que ceux kit est sorti parce que m'a dit que on ne pouvait pas avoir un kit pour alimenter deux aquarium voila ma question.

[@howardtalon2255]

Dunno if anyone gives a damn but yesterday I hacked my girlfriends Instagram password by using InstaPlekt. You can find it by Googling xD

[@docsmokyalian1397]

How many total manifolds can be added?

[@co2art-com]

hello there, thank you for your question. we had customers who ran even 6 Manifold blocks with this regulator!

[@OmarTheAtheistAziz]

where do i connect the tube hose going into the tank?

[@co2art-com]

Hi Omar, The tube heading into your aquarium can be attached to your diffuser to assist with the resolving of the CO2 into your aquarium water.

[@googlebox]

@@co2art-com this doesn't answer the question at all. Where do you connect the tube to the CO2 regulator?

[@OHaraekul]

@@googlebox There's a nipple ontop of the bubble counter. Attach it there. This should be self explanatory

[@bankaingn3104]

My working pressure knob doesnt work! Why is this?

[@co2art-com]

Have you tried contacting our support team my friend? We are available 24 hours a day.

[@rrated_jay143]

Do you use a check valve?

[@co2art-com]

We sell precision check valves on our website.

[@FreightTrain22]

@@co2art-com why don’t you include check valves in the “complete kit”? How is it complete without a check valve? You guys are supposed to be high end and there’s nothing high end about water getting siphoned back to the bubble counter every single night. Plus this makes the diffuser get clogged way faster because it is not just pulling in water, but also pulling in tiny debris. Yes there is an integrated check valve in the bubble counter but that means it’s gonna take forever for the co2 to start in the morning because it has to push all that water back into the aquarium. I was very disappointed to learn that the over 200 dollar kit I bought doesn’t have a check valve, something every single co2 system should have.

[@asimsg9231]

SCAMMERS! I bought from them worth of 210 pounds. It was returned by the shipping company, however, they did not refund me at all. It has been more than 6 months!! DON'T BUY FROM THEM. THEY ARE SCAMMERS.

[@co2art-com]

It's quite unusual for our carrier pigeons (also known as our shipping company) to return a package without it eventually landing back to our nest, and even more so for our golden-egg-laying-goose (our refund system) to not lay the golden egg (your refund). It's as unlikely as finding a dragon in your backyard, but hey, stranger things have happened, right? We take every concern seriously, as we wouldn't want anyone feeling like they're on a never-ending quest without a magical map. So, we kindly invite you to contact our customer support team, our very own league of extraordinary problem-solvers. They're more efficient than a wizard casting a "Locate Object" spell and they'll help you sort this issue out faster than you can say "abracadabra." You can reach them at [e-mail] or through the 'Contact Us' portal on our website. Let's turn that frown upside down, and transform this seemingly epic saga into a fairy-tale ending! 🌈

[@MumenRider78]

What's the wrench size?

[@lordjohnny2026]

What does it matter? You can adjust the shifter to whatever size you need.

[@googlebox]

@@lordjohnny2026 Not all wrenches are adjustable.

[@bcol127]

Is the second rubber gasket a spare?

[@co2art-com]

Billy Collins, yes that is correct. This is spare washer.

[@googlebox]

The video doesn't show how to get the CO2 into the tank so I don't know how this is helpful at all

[@co2art-com]

Hey, This video is aimed at the setup of the regulator. We often get questions surrounding the additional manifolds and how they connect to the PRO Elite regulator.

[@george5120]

Get rid of the damn music and explain what you are doing. For example, some people put mineral oil in the bubbler. What did you use? Mineral oil or water?

[@co2art-com]

Hi George, We recommend using either tap water or mineral water. Did you not like the music? We thought it was nice. Our videos are made for a more visual demonstration. Studies show that most people seeking instructions on KZbin tend to be visual learners. If you need any more assistance, please email us at [e-mail]

[@george5120]

@@co2art-com Hell, no, I did not like the music. I am here to learn. I am not here to be entertained. For example, how would you feel, sitting in a college classroom, unable to understand the professor because another student in the classroom is playing music? Same difference. The music is an unnecessary, annoying distraction.

[@co2art-com]

Maybe this video would be better for you? This was uploaded by a member of our support team some time ago. kzbin.info/www/bejne/aJCxl2SwpcyqgKM

[@user-kv8ur6xb4z]

If you don’t like it, jog on to the next video!! You’re negativity and self righteous attitude aren’t important