Your videos are always the best! I appreciate all the work you put into editing, narrating, filming, and planning to make the production value and instruction so excellent.
@SailriteDIY3 жыл бұрын
Glad you like them. Thanks for the kind comments!!!!
@fryloc3592 жыл бұрын
I've been binge watching your videos in an effort to have some knowledge to replace the canvas on my popup camper. I'm right down the road in Fort Wayne so if thats a video you'd like to make and need a demo camper I'd be happy to discuss it.
@lucilledaub59913 жыл бұрын
I love to watch you sew.You're such a great teacher. Love your videos.
@SailriteDIY3 жыл бұрын
Thanks a million!!!!
@livingyourbestlife7113 жыл бұрын
great job demonstrating this technique. I've been doing this same technique for about 12 years here in Kemah TX marinas! Thanks for sharing!
@SailriteDIY3 жыл бұрын
Excellent! Keep it up.
@thomasgordon5173 жыл бұрын
Thank you so much for making this video. I was struggling with the knot issue below the vinyl and this video came out just in time since I am starting a new enclosure project this week. Tommy W/Hoosier Fabrication SXS Custom Cage Enclosures
@SailriteDIY3 жыл бұрын
Glad to help!
@callumari31993 жыл бұрын
Thanks for the tutorial. I've learnt a lot from your videos. They are clear and straight to the point. Cheers.
@SailriteDIY3 жыл бұрын
So glad you like them.
@Carloz2543 жыл бұрын
Thank you thank you so much I have archive something from you and understood very well I hope am going to do well for my work I wish I should be there with you as a student here in Nairobi Kenya I haven't get that skills.. ☺️☺️☺️God bless you i
@Playitagaindian3 жыл бұрын
Your videos are always so helpful. Been sewing for 54 years and am always picking up great methods. Thank you, Sailrite!
@SailriteDIY3 жыл бұрын
Glad to help! Thank you!!!
@paulputnam2305 Жыл бұрын
Thank You! That was incredible.
@SailriteDIY Жыл бұрын
Thanks!!!
@davidh72682 жыл бұрын
Great Instructional video. I have the LSZ1 machine and spending a lot of time learning. I recently replaced the isinglass roll up window zipper using your instructions. The project turned out well on my 44 foot Island Packet Sailboat. Thanks for tips and video.
@SailriteDIY2 жыл бұрын
Glad your window curtain for your sailboat came out great. Thank for your kind comments and buying the Sailrite Ultrafeed Sewing Machine.
@mickemusik3 жыл бұрын
I like your videos and all your info you'r sharing. I am working with sewing boat covers in Sweden. And I prefer to have some canvas between the zipper and the window. Most if the fabricators do the same thing here in the Nordic countries.
@SailriteDIY3 жыл бұрын
We are glad you like them! Good luck with the boat cover.
@ramloganfracic57613 жыл бұрын
Thank you for sharing this wonderful informative video. Your procedure is very clear blessing
@SailriteDIY3 жыл бұрын
You are welcome! Thanks!!!
@cynforrest3 жыл бұрын
Thanks for great instructions! I’ve learned a bunch from you. Successfully reupholstered our patio furniture, including gusseted cushions with zips. Thank you. Btw, I agree the DSTape is a game changer!
@SailriteDIY3 жыл бұрын
Thanks for the kind comment. We are glad you are completing several DIY sewing projects successfully, well done!!!! Yes, the Seasmstick Basting Tape is amazing stuff, makes sewing much easier.
@agnaldooliveira43383 жыл бұрын
Hello I have learned and applied in my work Gratitude
@TERMIN8TOR993 жыл бұрын
I did this for the 1st time on old hardened glass and I cut the stitching holding the zipper teeth. I've since replaced glass and installed zipper, was much easier to cut.
@rahalati2 жыл бұрын
Excellent video, thanks for sharing. May I ask what is the importance of adding the binding tape, is it just decorative something else?
@Achabab2 жыл бұрын
So helpful thank you very much
@jbreid8129 Жыл бұрын
Thanks for this informative video. I’d like to install a curved zipper into a screen. I assume the procedure would be the same as with a vinyl window? I’ve never sewn screen material before so I’m a little nervous!
@wilkbor3 жыл бұрын
Thanks for the video.
@llinamejia7470 Жыл бұрын
Thanks
@leticiaaviles71363 жыл бұрын
Gracias por tu video muy informativo.
@kirstylockwood74213 жыл бұрын
A great video, thank you. So neat! I'm curious about whether the basting tape gums up the needle at all?
@SailriteDIY3 жыл бұрын
Basting tapes have a tendency to leave a gum residue on the needle when sewing lighter fabrics, but not so much when sewing heavier fabric assemblies. Heavy fabric assemblies have a tendency to clean then needle as it exits and enters the fabric. Although a well-adjusted machine should not be affected, if it does run the needle through a bar of Ivory soap to help prevent build-up or use a cotton swab with rubbing alcohol to keep the needle clean.
@mickywiese19904 ай бұрын
What do you use inside of the weights you have? I have thought about making myself some, but worried about using sand for obvious reasons? Your Video's are awesome by the way!
@SailriteDIY4 ай бұрын
We used sand and it has not leaked out for well over 5 years since made and I use them almost daily. Here is the link to make them: kzbin.info/www/bejne/aJmXmqCLjdylfqs
@Nighthorseguncases3 жыл бұрын
Got to see this..
@Badw34 Жыл бұрын
thank you; great video. Can you send a link for the instructional video for installing curved zipper in a vinyl window with a permeant screen. i don't seem to be able to find it. thanks so much.
@SailriteDIY Жыл бұрын
Is this the video you need?:kzbin.info/www/bejne/pZe7iKd9p6acas0
@Badw34 Жыл бұрын
@@SailriteDIY yes thank you
@mandyD2 жыл бұрын
Are your machines and supplies available in South Africa yet?
@KentRobertSwickJrAroudTheWorld2 ай бұрын
Is there an adhesive you'd recommend for clear vinyl to fabric? Wanting to reinforce any sewing, as in not great at sewing.
@ryanellis6422 жыл бұрын
And why not see the outside zipper half first
@ryanellis6422 жыл бұрын
You didn’t say about the types of zippers and how you can only use a spiral zipper
@PatrickGiguereLC3 жыл бұрын
First comment!
@schisandra3 жыл бұрын
Thank you for this helpful video (though to be nitpicky, the demonstrator’s nails could look a little nicer)
@TERMIN8TOR993 жыл бұрын
Lol, really.
@johnq.public26213 жыл бұрын
:)
@sxsboy22533 жыл бұрын
Wonderful information and it couldn’t be more timely as I’m getting ready to replace the windows in my 30 year old Coleman pop top. My Sailrite order should be arriving this week sometime and now I’m ready to go.
@SailriteDIY3 жыл бұрын
Sounds great! Let us know if you have any questions.