Installing a Depo Racing Intercooler on my Focus ST! deporacing.us/...
Пікірлер: 57
@spacecalander Жыл бұрын
I absolutely love my 2014, just did this mod using your vid. Just awesome!!
@kemsleygobey23574 жыл бұрын
Great video mate really enjoyed it 👍
@MikeFails2 жыл бұрын
Watched this to guide me to install my 3.5 Depo. The factory clips off the old intercooler for the Depo lower brackets didn’t fit so I had to go buy a couple nuts for the factory bolts to secure it back to the car. Great video btw!
@WillMcSpaddenАй бұрын
What nuts did you get? I just got mine today for my 2016 and I’m trying to figure out what the bolt size is.
@ILLSMOKQ-xs6qs3 ай бұрын
I got the mishimoto intercooler 👍🏻 great vid man
@pawdre51513 жыл бұрын
The biggest and baddest intercoolers for your St Depo beast Cpe heavyweight Garrett IC
@jefferyswift74384 жыл бұрын
Great video I got the depo 5.5" intercooler makes a giant difference.
@Nickjoenap4 жыл бұрын
Jeffery Swift Yeah I figured since I don’t have plans to go big turbo the 3.5 was enough but I’m sure the 5.5 is crazy
@jefferyswift74384 жыл бұрын
I was unsure if I will go big turbo or not so I just went with it that way if I do I have it and it still makes a hell of a difference. Compaired to the cpe its almost identical and much cheaper thats why i went with depo
@Nickjoenap4 жыл бұрын
Jeffery Swift that’s probably a safe choice. I don’t see how the CPE can be worth how much more it is. Depo is great quality
@jefferyswift74384 жыл бұрын
Imo its all branding because there such a huge known brand in the industry and they do make great products they will charge more over a smaller company because they can and people will pay the extra for there name
@greecoboost2 жыл бұрын
The Depo intercoolers are constantly sold out. That says a lot.
@Little_Skyz3 жыл бұрын
I finally picked up an accessport and this is my next purchase! (For $350 why wouldn't I?)
@MacguffinsTV Жыл бұрын
I went with the Mishimoto IC that I found on Ebay for 480, 512 shipped. Said pre-owned but the thing doesn't have a blemish on it, so I think maybe it was just open box or a return or something. Couldn't pass up saving 180 to 200. It's the gold/yellow one though, I wanted the silver, but it's w.e you can't see it that much to really matter at the moment. It came with hardware for the sensor, but no brackets. Hmm. I haven't installed yet, was thinking about doing that today, but I may not be able to if it's missing brackets that I need. Update, just installed it.
@austinmiles893 Жыл бұрын
Did the intercooler set on top of the clip or under the clip on the radiator?
@goofyman67083 ай бұрын
How long it took you to get it shipped? I just ordered mine but haven’t even received a order yet
@kylieyoung7133 жыл бұрын
Did the sensor automatically fit onto the new Depo? Or did you have to hollow out the hole with a dremel to make it fit (on the sensor not IC) ?
@Nickjoenap3 жыл бұрын
I had to take the metal piece out of the hole then it fit
@r0tax73 жыл бұрын
Hey, good video. I'm in the process of prepping mine for install, you showing the brackets helped. Especially when you showed that you swapped the lower one in the end. My question is, did you end up using the stock clip-nut for the lower factory bolt? kzbin.info/www/bejne/p3W0nGd9jrqGY5I I see you have the bolt coming down from the top, and can't tell for sure if you have the nut on it. I'm just wondering if I need to buy a nut for that factory bolt for this before I tear mine down and do the install.
@Nickjoenap3 жыл бұрын
I believe I used the factory one or one that came in the kit. I didn’t have to buy anything extra
@BLK_GOD2 жыл бұрын
Bro u already got the bumper off like that's isn't part of the install
@ReaganReese3 жыл бұрын
Great video! Seriously thinking about this cooler.
@Nickjoenap3 жыл бұрын
It’s been great!
@ReaganReese3 жыл бұрын
@@Nickjoenap Just ordered! Hopefully I'll get it soon!
@east83music4 ай бұрын
hey bro, what size wheel spacers are u running? u have good fitment
@Nickjoenap4 ай бұрын
20mm
@east83music4 ай бұрын
@@Nickjoenap tnx 🤙🏽
@Criscalvoo2 жыл бұрын
Did you ever upgrade your charge pipes? I got the same ic for my 18 st, but I’m worried about blowing off the stock charge pipes
@Nickjoenap2 жыл бұрын
no upgrading the charge pipes on the stock turbo doesn’t really do anything. you might need to upgrade the clamps to t bolt clamps instead of the factory worm gear clamps. that’ll keep them from popping off but other than that the stock ones are fine
@michaelhamilton92123 жыл бұрын
Did you have to do anything special after removing the AGS and installing the IC? I’m getting a code and it’s putting me in limp mode
@Nickjoenap3 жыл бұрын
i didn’t have to do anything
@edwinblanco17892 жыл бұрын
Question: what made u decide for the depo 3.5 FMIC instead of the 5.5FMIC(beast mode) I am looking for which one of those to pick
@Nickjoenap2 жыл бұрын
i just didn’t need the 5.5 on stock turbo so i didn’t spend the extra money
@kirkgardner84853 жыл бұрын
Im running a piggy back on mine with the stock IC, heat soak is a MFer, will the 3.5 be able to improve this, I daily it in the desert as well so 110+ degrees in the summer.
@Nickjoenap3 жыл бұрын
Yeah I’ve been told the 3.5 is more than enough for stock turbo. I’m sure the 3.5 will fix your problem but a 5.5 could be better
@tylernewman743 жыл бұрын
What splitters are you running?
@Nickjoenap3 жыл бұрын
It’s two broken pieces from a Cadillac CTS splitter lol
@bobbydouglas163 жыл бұрын
Great video! How did the tune go ?
@Nickjoenap3 жыл бұрын
It was great, the video on it will be up Saturday
@jordanpavlic3833 жыл бұрын
the whole shutter system is trash, i got rid of that stuff when i first got my car
@johnlefever32203 жыл бұрын
What front lip do you got?
@Nickjoenap3 жыл бұрын
It’s a broken piece of a Cadillac CTS lip
@josez74333 жыл бұрын
How you fix your hood gap?
@Nickjoenap3 жыл бұрын
Twist the black pads in the front of the engine bay all the way down
@ivann5103 жыл бұрын
Do you need to spray the adhesive?
@Nickjoenap3 жыл бұрын
you can use hairspray too
@ivann5103 жыл бұрын
@@Nickjoenap ah okay
@ivann5103 жыл бұрын
@@Nickjoenap do I need the active shutters? I tried installing this intercooler but it wouldn’t fit in because of it
@Nickjoenap3 жыл бұрын
@@ivann510 no you have to take them out
@ivann5103 жыл бұрын
@@Nickjoenap you’re the man Nick
@nixonlubaba26733 жыл бұрын
List of tools needed?
@nixonlubaba26733 жыл бұрын
And never taken my front bumper off before. Is it just clips?
@nqlynx80228 ай бұрын
30$ refund shit id ask for a full refund for damaged product
@baileydennis68803 жыл бұрын
Ummm you should be tuned if you’re running this stuff
@Nickjoenap3 жыл бұрын
You should do all your mods before getting tuned, I drove without a tune for a while and it was fine
@Great_Lakes_Discus3 жыл бұрын
@@Nickjoenap not to disagree but you should have it tuned within the week or so. Although it won't damage anything persay but it could make your car run weird