How To Replace Ford Focus ST, FUSION, MKT, MKZ AND MKC EcoBoost 2.0L Turbo.

I am an Bmw Enthusiast, Auto mechanic, avarage Joe car guy who love Diy, Car Meets and Canyon ➡️ Thanks for Watching, And Thanks for your Support .
SHOP ⏬ FOR ALL YOUR BMW AND F80 MODS.⏬
www.vr-speed.c...
BMW/Mini brakes bleeder: amzn.to/3vfdGgT
ATE TYP 200 brake fluid: amzn.to/3IdDXjg
F80 M3 Street/track Pads
Front, Ferodo Ds2500: amzn.to/3sdfMvL
Rear, Ferodo Ds2500: amzn.to/3pakvww
Red push start: amzn.to/3IlE6Br
VLAND TAIL LIGHTS: amzn.to/35pkuxy
www.f8xfreaks....
CODE: WEIWORPAYVEH for 10% off
burgertuning.c...
2015 F80 M3 YMB
M Performance Exhaust, with secondary cat delete.
Dinan Stage 1 with Dinan cold air intake
H&R Super Sports springs
HRE Flow Form Wheels FF-04 20 X 9.5 F, 20 X 11 R
BMS Blow Off valves

[@kingkapital4674]

I been looking all over KZbin and google for 2 weeks now trying to find where this turbo sits and here yall are posting this yesterday, thank yall so much! This is very helpful

[@AntheniumX]

Informative, especially mentioning the wastegate issue. Looking forward to replacing my OEM with the PowerMax to keep that OEM+ feel. I'll be coming back to this when I do the install, thank you!

[@jessebudelman]

I would go with the big wheel stocker (BWS) same oem response, can get more power out of it compared to the power max and you save $400-500$ over power max. 350 whp on bws and power max is tapped out at 290 hp or just shy of 300.

[@wabanti80]

How long did it take to remove and install?

[@aidanhoffman7105]

I am looking at doing the power max turbo this weekend. Very good video. Only question is when do you drain and add coolant in?

[@Jbonly21]

Drain first, make sure the engine is cold before working on it, and add last. Don’t forget to bleed the coolant system.

[@jesuscarrillo4344]

I used this video to replace my turbo that had the same wastegate issue. I removed the wiper shroud but not the wipers themselves. From there, I moved the coolant expansion tank and loosened the upper motor mount to push the motor forward. I drained the oil but didn't drain the coolant. Removed all lines and pulled the turbo from the top with plenty of clearance. For those reading this, use all new gaskets. Add your coolant and oil before pushing the motor back in place so you can see if any fluids are leaking. I had to do it twice because the coolant feed wasn't tight and I ended up taking a bath in it lol If everything goes right the first time, this will take 3-5 hours.

[@dragonmastersalsa7033]

Did you car have any symptom before changing the wastegate?

[@Jbonly21]

@dragonmastersalsa7033 wouldn’t build boost

[@dragonmastersalsa7033]

@@Jbonly21 yes but any boost or it was les boost than normal ?

[@jesuscarrillo4344]

@dragonmastersalsa7033 It would build boost depending on outside temp. On warm days, I could get between 5-6 psi, on cool days, 7-8 psi, winter months 10-12 psi. What happened is that it would have a 50/50 chance of tripping underboost code before it reaches the previously mentioned boost levels. That puts the car in limp mode and limits the boost to 4.5 psi. Turning the car off and them back on will take the limp mode away without needing to clear codes.

[@dragonmastersalsa7033]

@@jesuscarrillo4344 ohh i see ,because i have already like a year that my car it only makes a quarter of the boost gauge of boost and i change a lot of parts already and im guessing is probably the wastegate but i dont have any codes or smoke or nothing ,car is smooth and everything ,i connected to a friends diagnostic computer and theres no codes ,its kind of weird