Installing a HYPER 212 BLACK EDITION Air Cooler in a PC (Tutorial)

[@loyalsfn3885]

Thanks dude, almost thought I had to take off my whole motherboard

[@aurorayoru5333]

I had to because my case was covering up two of the holes

[@epicteamgaming2786]

I’m gonna install it tonight every tutorial they take the whole damn thing out man they make it look hard

[@INF1NI73]

Yeah I was relieved the second I saw his motherboard still installed.

[@elibrown6796]

@@aurorayoru5333yeah me too it’s running with 3 screws rn i hope it goes ok

[@hibye421]

@@epicteamgaming2786😊😊😊 zzz

[@bregowine]

I had never replaced any component in my PC, and your video helped me tackle it with some confidence. Everything worked well in the end. Thank you so much for sharing this

[@paulwall5851]

Did you have to do anything or whenever you started the PC yup it works without doing any type of programming or anything

[@novanonsense]

Thank you! This is the only video I found about changing a CPU cooler that shows how you can get to the backplate on the back of the motherboard without having to take the motherboard out of the case entirely.

[@landenleonard]

Built my first pc today and I used this video to install my cpu cooler. This was super helpful, thanks!!!

[@thinkable3D]

Awesome glad I could help! 😁👍

[@JJOOKER]

@@thinkable3D Why you used the cha_fan and not the cpu_fan ?

[@colstonyk1600]

how thr hell do u artach the fan to the cooler

[@DrQuagmire1]

@@thinkable3D just recently ordered a Hyper 622 Halo for my old(ish) PC build, and i'll be using this video as a guide

[@frankyhernandez4038]

Ended up flipping the cooler and worked out great. Wasn’t bad at all. Thanks for the instructions

[@Lightstar_uwu]

Wym flipping the cooler??

[@gasbilll]

Used this as a basic guide for installing my H412R -- same principles applied, though components are different, and was incredibly helpful! Thank you very much!

[@kickboxerphil]

I can't thank you enough!!! This was magnificent! I have replaced my Aio with this tonight on my prebuild.. I'd have never managed it in a million years with the standard instructions as they made zero sense.

[@thebookkeeper3508]

Yours is the only tutorial which bothers to mention the direction of the fan, so thanks for that. It seems that many KZbin tutorials install the fan the wrong way around, either pushing air back into the case, or else affixing it to the wrong side of the cooler. The manual does not help in this regard. I received an extra fan with my cooler and would like to try out the 'push/pull' method.

[@thinkable3D]

Nice!

[@PokeFamilyAdventures]

Installed my cooler with the fan facing the back end of the PC - not too sure if i need to flip it

[@grimace3983]

thank you. i built my first pc a few days ago using a stock cooler and it turned out that when i opened any game it was not keeping the cpu cool enough. i was concerned that i would have to take the whole thing apart to install a better cooler but this has reassured me that it's not going to be as difficult to replace as my imagination made it out to be

[@nasty5634]

I’m upgrading from the stock amd fan finally and this is going in my saved videos for when I install the cooler.

[@llai8501]

Thank you so much for this video. So clear. I am updating my CPU and replacing a Ryzen 3 3100 with a Ryzen 7 5800x3d and got this exact cooler for it. This video was perfect!

[@Psyopcyclops]

Anyone reading this DO NOT overtighten the larger nuts at 4:43. It will crack the terribly made plastic backplate. If you do crack one and still use it for a while, it’s almost impossible to get back off down the track. There’s nothing to grab a hold of properly without pliers and they can easily scratch the traces on the board.

[@skullsmitten]

really helpful guide! i was very confident with your assistance :) unfortunately it looks like the bracket is a smidge off for my AM4, and i was sure i put the backplate on right... will update my comment if i make any progress 🥲 update: fixed! i had flipped the brackets upside down and backwards trying to work out how they connected-and they have a slight curve to them, so when i ended up attaching them backwards they didnt fit lmao... so it's all installed now! and it's a lot quieter than my old racket-making one, 10/10! had a brief scare thinking i shorted the gpu or motherboard in the process, but luckily it turned out i only connected a few things wrong after wrapping up my work (my hdmi cables go straight into the graphics card, which i forgot and put them in the normal ports, lol) thanks again! great video, i wouldn't have made it this far without all the great footage you provided

[@watchyourmouth8232]

Most helping video on youtube for replacing CM hyper 212..every steps shows,.worth to watch for newbie like me..thanks dude..

[@davideliasok]

"Give it a li'l smooshy smooshy" made me chuckle. Thanks a lot man, very helpful!!

[@sheldonvern]

omg this would have saved me from waiting months for a dang cpu cooler replacement thnks

[@nyariaz]

I'm planning to buy the exact same CPU cooler to replace an older one I have and this video is very helpful, makes me less scared to install it, thank you so much!

[@nathanrossiter122]

Exactly what I was looking for I have a stock cooler and its about time I change thermal paste so thought might as well upgrade for better temps while i'm at it thank you very much

[@Larxy_]

thanks a lot for the tutorial, bracket part was a bit confusing but got there anyway! thanks!!

[@Sprinkles12345]

Thanks to your help, had this installed and cooling my PC right in the hour right before I left for work. Much obliged.

[@rachd92]

Best video I found to help me install this cooler. Thank you so much for making it so much easier!

[@flame25hz]

Very cool and helpful video, man! You really helped me a lot with this one. Thank you 😊! Keep up the good work!!!!

[@thinkable3D]

Thank you! Glad I could help😁👍

[@timentimentimen]

Thank you! You helped me a lot, and it's working! The first step was the hardest - removing the old fan: it was stuck to the CPU and it took me more than an hour to get it unstuck. :D

[@thinkable3D]

Yikes. I had that same problem because the old cooler was so old

[@timentimentimen]

Ah ok! This one wasn't even that old, around 7 months. It was the stock cooler that came with the 3600X.

[@883clan9]

Took me 3 hrs

[@FNine-TV]

Thanks this helped so much with installing my new cpu fan! ♡

[@desisparta]

Thank you for the guide. I got mine installed perfectly.

[@goldengraeme1918]

Easy to follow guide, cheers

[@kqxx]

thank you! this is helpful. I wasn't sure how to install it. Although it's an old video. It's helpful!

[@Exhaust223]

Thanks! I was about to take apart my pc to do it.

[@RitamBuchwald]

Mounting barkets for the fan were pretty underwhelming, also had to staighten some of the heatsinks as they came bent. Pretty good compared to stock amd cooler, about 15 degrees cooler under load. Side note had a hard time getting the stock cooler off because the thermal paste that came with it acted like glue. My 5600x actaully ripped out of the cpu socket bc the bond was so tight. Luckly no damage to the chip or the motherboard, got everything working in the end.

[@gabrielpaco2409]

thank you it helped! Super clear and straight forward. Keep up the good work!

[@robb9414]

Pretty sure you plugged that into the chassis fan header, not the cpu fan header... don't know if that matters ....

[@asmodeus1234]

Thanks for the video mate, just installed this bad boy!!!

[@Jaffa__]

This helped me so much. Thank you!!

[@Grolmusl]

Please. I noticed that this cooler is compatible with lga 1700 Alder lake. Is it true.? Thanks

[@perfectdawnn6714]

This was tremendous help, man! Thank you so much.

[@harlont]

Excellent video, brother! Very helpful. I'm now subscribed!

[@tiawaters3792]

I love this baby!!

[@milenkomimica4115]

Thx dude, this helped me a lot!

[@caseybrewer8950]

Thank you!!

[@cradlerian]

Thx bro, that was nice DIY video

[@JJChameleon]

just finished and it worked thanks!

[@JohnWick-bm4ld]

Great video very informative

[@cubestur8157]

I put this same cooler on my mom's PC B-)

[@Shamimfarsi]

Simple and straight forward video. You showed everything. Thanks a lot. Is it quiet? How has the performance gone so far?

[@manliketas7074]

Oh my god your a life saver

[@gemco4719]

Thanks for the help

[@0____________0_____________0]

Im gonna buy this to replace my prebuilt cooler which is bad

[@brianemclaughlin]

Thanks a million bud!

[@austinclark3378]

Great video, very easy to understand!

[@stormstormskling2323]

thanks bro

[@gsafian]

This is a helpful vid, one question is you mention to wipe down the pervious thermal gel on your cpu. what items to make it easier to clean it?

[@dbald2525]

Appreciate the video! Helpful!

[@thinkable3D]

Thank you so much!

[@MoEternity96]

Thanks bud 🙏🏽

[@salvationsdrip4359]

Thanks, saved a lot of time! ❤️

[@thinkable3D]

Thanks for watching 😁

[@jaydenperez9803]

Thank you.

[@GRIMMLAMAR1]

I need some help my pc won’t start

[@sO_RoNerY]

Could’ve you just turn the cpu cooler facing towards the back of the fan? Wouldn’t that be beneficial?

[@afcubing444]

Nice video, you should make more cubing videos again too. But this is still really cool

[@juanalvarado1736]

I've been thinking about getting this cpu cooler to go with my upcoming purchase of a ryzen 5 3600, or should I get a ryzen 5 3600x?

[@thinkable3D]

I have the 3600 and I love it. There is not too big of a difference between them that I would choose the 3600x.

[@Yungkingstonn]

You should do asmr man your voice is so relaxing :)

[@mikavdmd4623]

Good video, recommend a bit more thermal paste tho

[@valin0r]

Thanks for this video!

[@robphin85]

Good video, I bought the hyper 212 black edition but I can’t Clíp the fan to the radiator

[@justinosei5270]

Same, was there ever a solution to the fan issue

[@amses8755]

Hi there, I’m replacing this air cooler with a liquid one but Im having trouble taking off the back plate on the motherboard so I can replace the stand off screws. What do i need to do?

[@amr16122009]

Very useful tutorial

[@portman8909]

I got the non black edition and it didn't include spacers, apparently it just screws right in on the backplate. Seems to be working fine I guess.

[@welfn2211]

Helpful vid thx

[@tarikvoloder4741]

Please help me, what are dimenssions of it bcs i dont if it will fit in my case because the rear cooler of my case is 80mm?

[@Close_Up]

Nice video!

[@georgepap727]

Great and informing video keep it up! I would like to ask if it will fit in a Corsair Carbide Spec-01 Blue LED on a B550 tomahawk.

[@jaznit]

Don't you want the air going in the other direction? It is pulling the air to the front, but that just gets met with the incoming air from your front fans? Shouldn't it be pulling air from front to back?

[@FilthyCasua1]

One of my screws broke when installing the cooler. I decided to worry about it when the day comes

[@krism5603]

Make sure your BIOS settings are up to line for the cpu cooler, issue I fought with all day today

[@Yungkingstonn]

How do ya do that? :o thanks

[@Arsenal2045]

Thank u so much

[@BartholomewHunt87]

A thorough and helpful guide, thank you! Good job.

[@justsayin2085]

What's annoying is that my older Silverstone tower doesn't have a backdate on the case, i literally have to remove the motherboard to install the cpu cooler backdate T_T

[@TauntNut]

Does the cooler fits in a nzxt h510? I think it does but need to make sure it does

[@llein2428]

Sir,can you still close the montech tamper glass door without obstacle with air cooler?

[@j.lietka9406]

Got it to-day! My PC build needs RAM, so not ready to install the 212. Have the AMD 5600G which comes with a Wraith Stealth. Does the 212 come with thermal paste? Thanks & great walk thru! Do you have the fan oriented to push air out to the rear case fan?

[@thinkable3D]

Yes the fan is pointed to have the air go from front to back. It does come with thermal paste. Good luck on your build!

[@j.lietka9406]

@@thinkable3D thanks!

[@aleca6856]

How good will this work with a i9 9900k and will there be any problems with it fitting with my ram?

[@thinkable3D]

It work work pretty good. Maybe look into getting a liquid cooler to maximize performance for an expensive cpu. You will have to check the spacing between the cpu and the ram. Usually it will fit unless you are using a mini atx board

[@shaunosmorrison8385]

that cooler looks way easier to mount than the older variant of the Hyper 212x

[@Chaoscsgo1]

Unfortunately my pc won’t turn back on after putting this cooler on sage

[@alphatroopz]

sounds like a dumb question (which im sure it is), what should i rub the thermal paste off with from my previous cooler as i dont know if i have to be soft with it or has to be eg a microfibre cloth

[@thinkable3D]

I would just get a paper towel and wipe off the thermal paste. It can be stuck on the cpu so be sure to get it all. Just be careful not to get any paste on the motherboard. (That could cause a short)

[@fordified13]

I use coffee filter and rubbing alcohol

[@tamadrummer20]

Will an amd R7-5600G use the same bracket setup as yours did in this video?

[@j.m4a1]

Bro does it work with the b450m pro mobo? I can’t find anything on google talking about it

[@thinkable3D]

It should work yes.

[@screeem]

Damn, the later variations of these Hyper 212s were much more forgiving to install compared to the earlier versions. @ 9:30 shouldnt the CPU cooler be plugged into CPU_FAN (usually located at the top portion of the mobo) rather than CHA_FAN?

[@JJOOKER]

Its work the same the difference is that in CPU_fan the cooler will slow or work faster according to the cpu temperature , but you can use a software for it too... You can even connect chassis fans in the CPU_fan but they will not work like chassis fans...

[@williamwhite2092]

I don't think it would matter too much but I have a Intel i7 would this work for it?

[@thinkable3D]

It would work fine👍

[@svKam]

So you want the direction of the arrow, of the fan pointing towards the heat shield?

[@svKam]

This is the only thing I’m confused about and don’t want to install the fan wrong against the heat shield.

[@PokeFamilyAdventures]

installed my cooler upside down, so the fan is facing the back of the PC - does this really matter? Should i reflip it?

[@ItsMeKevinFPV]

nice video ! thanks !

[@Geo-mn1xd]

guys before you remove the cooler heat up the pc by runningh it for 20 mins so the old thermal paste becomes softer then wiggle the fan side 2 s die to ease it off

[@MidsterMeddie]

can anyone tell me the dimensions or sizes of the clamps/clips for the HYPER 212 BLACK

[@cris20955105233]

My mother board has nothing to screw the hexagon screws it's just an open area

[@versacehibachi2755]

I can’t figure out where to put the cords

[@silkyjohnson9094]

My screw snapped on the bracket when installing what do I do

[@advance9343]

Bro you installed the clips on the fan wrong they need to go on the other side so that they are tighter

[@Pazuuuk]

it seems i have installed my cooler wrong, the fan is pointing down

[@PixelAbyssVoyager]

How do you put it back together once u remove it ?

[@uuzoo]

I plan on installing this very same CPU on my pc. Thank you. One question? I heard the fan gets in the way of the first RAM slot on a AMD M5A97 R2.0 MB. True?

[@thinkable3D]

It might be very close. You might have to adjust the fan so that it is above the ram stick.

[@pedrouribe7629]

When i was mounting the cpu cooler i forgot to take the plastic cover from the bottom part of the cooler...until i was about yo turn on the pc, so i had to remove the cooler back in order to take that little peace of plastic off but when i did it a big portion of the thermal paste came off with it so the cpu itself was left with just a tiny little portion spreaded on it...so i was wondering if i have to reaply thermal paste again or i would be ok with it ???

[@patnordby9693]

take off the old and reapply

[@pedrouribe7629]

@@patnordby9693 that's what i'm doing in a couple of days

[@pedrouribe7629]

@@patnordby9693 Thanks!