Installing a Pfister 1-Handle Bathroom Faucet with a Push & Seal Drain - Brea Collection

[@jf8637]

Use a 7/16 deep socket to scr 4:51 ew on the long brass nut that holds the Faucet. In my 1950s house, not even tiny tim could get a crescent wrench up in that tight area. Also, have someone hold the Faucet above in place . Much easier..oh one more thing, make sure the little final tighting nuts down by the white plastic caps..I didn't notice with rust crumbs everywhere that it was above the horseshoe Faucet holder. Thank God I didn't have to loose that long nut with a crescent wrench. Looks really nice when your done. Oh and you may have to partially saw off the plastic nuts that held the old Faucet tight to get it loose. Rigid sells a reasonably priced oscillating saw. Remember, it looks nice when your done.

[@anitaroschen6872]

as amateur as I am, I appreciate a step by step video on installing the Brea faucet. Thank you for presenting it.

[@aydinhudson2280]

Instablaster.

[@colonelcamp]

I just successfully installed this faucet using this video but the one thing this video leaves out is that you've got to use plumber's tape or some kind of sealant on the water line connections. I did this without it at first and got leaks on both connections. After the tape, no more leaks. Looks really good. Changed the whole bathroom.

[@claytonlacy7916]

do you have the cheap plastic lines? or do you have the good water lines with the gaskets.

[@dratonbalat3423]

"Next is the long nut" that SHOUD NEVER BE THIS LONG. YES, I'M YELLING😂😂😂😂😂😂

[@marsoelflaco5722]

This video may be 9 years old, but it's still helpful. Just note: you'll need 2, 3/8 to 1/2 in faucet lines, probably a 12" and a 16" respectively.✌🏾

[@SteveRottmannJr12]

Would have been a lot cooler if the lf-042-vngs instructions would have mentioned the water supply lines needed are 3/8” to 1/2” 🙄😤

[@PfisterFaucetsUS]

Hi! Our Consumer Support team is here to help... please contact them here: bit.ly/2NMEgub or call them at: 1-800-PFAUCET (1-800-732-8238)

[@liangmu36]

At 3:23, how many of you noticed that this step is super hard to achieve, using an adjustable wrench? Am I the only one who has super tight space under the sink?

[@PfisterFaucetsUS]

Hi! If you need assistance installing your faucet, our Consumer Support Team is here to help... please contact them here: bit.ly/3CSKixX or call them at: 1-800-PFAUCET (1-800-732-8238)

[@danylachapelle309]

same here. trying to find their quick installation tool to buy.

[@PfisterFaucetsUS]

Hi! The optional installation tool #931-0770 can be purchased. Below is a link to view and purchase the installation tool by clicking on the "Buy Online" button. Thanks - Pfister Social www.pfisterfaucets.com/parts-support/replacement-parts/product/installation-tool-9310770-kitchen-and-lavatory-installation-tool?modelNumber=931-0770&sf253950575=1

[@David-ho1yi]

Use a 12 point wrench of appropriate size. It is much slimmer than an adjustable wrench and made the installation much easier.

[@johnnorland5177]

Saved my butt! I was taking it out (changing from oil rubbed to brushed nickel) and I was trying to unscrew the thin silver bolt rather than the octagonal sleeve.

[@PfisterFaucetsUS]

Hi, that’s great news! We’re glad the video helped. Have a nice day. Thanks - Pfister Social

[@adibtheman]

Any video or instructions on removing and cleaning the aerator in this specific model?

[@PfisterFaucetsUS]

Hi! Our Consumer Support team is here to help... please contact them here: bit.ly/2JZsquZ or call them at: 1-800-PFAUCET (1-800-732-8238)

[@liangmu36]

A quarter coin would do it.

[@jimstippich9585]

Great video EXCEPT you are putting the water valve connections on the wrong Faucets. You connected the Cold water to the Hot input and the Hot to the Cold input. I assume you did this for video recording issues. However, you should have changed the video camera etc to make sure you had it match your instructions.

[@PfisterFaucetsUS]

Hi! We’ll be forwarding your comments to our Brand Marketing Teams for their review. Thanks - Pfister Social

[@retiredlogman]

Good presentation. I had to look for more installatio specifics as the literature with the faucet does not include the information about the water line connections. Technical writers are evidently in short supply.

[@PfisterFaucetsUS]

Thanks for the great feedback. Typically, most models use 1/2" water supply lines with 1/2" fittings to the faucet. Have a great day! Pfister Social

[@BeckWenger]

I didn't notice any plumber's putty on the drain. Is this not needed with this particular design?

[@PfisterFaucetsUS]

Hi! Our Consumer Support team is here to help... please contact them here: bit.ly/3qAcoI2 or call them at: 1-800-PFAUCET (1-800-732-8238)

[@mfgman2011]

I installed an Elden faucet, only for the sink seals on the drain to still leak. Now, I'm going to tear it back out and install with silicone. Why I ever trust the manufacturers instructions to not use silicone is beyond me.

[@MrByronHypolite]

Same here leaking a lot had to tear it apart and do it again over

[@MrByronHypolite]

Great instructions, you helped me big time! Thanks

[@PfisterFaucetsUS]

That's awesome! We're glad the video helped. Thanks -- Pfister Social

[@gordontaras]

Need to see one with putty. That’s what I searched for

[@JoeRuizLordoftheRings]

Should I wear shoes while installing bathroom faucet? 🤔

[@jimmcniel6111]

ok I had a water line break on a Pfister faucet. it was part of the faucet ---is there a way to replace just the line and not the whole faucet

[@PfisterFaucetsUS]

Hi! The water lines coming from the faucet are factory installed and not replaceable. If you purchased the faucet, you may be covered under warranty. Our Consumer Support Team is here to help... please contact them here: www.pfisterfaucets.com/parts-support/ask-a-question?sf258074418=1 or call them at: 1-800-PFAUCET (1-800-732-8238). Thanks - Pfister Social

[@jimmcniel6111]

@@PfisterFaucetsUS Thabks

[@PfisterFaucetsUS]

You're welcome, and have a great weekend! -- Pfister Social

[@donny6016]

I have a question....my lower deck plate has a hole in it. It looks like the hole is used to guide the long mounting nut. But when I use that as and installation guide the two other guides to not line up. Could I get some help with this?

[@MStar10]

Great video, but isn't the long cylinder-like nut put on upside down under the facuet?? Compared to the instructions - can someone pls confirm

[@PfisterFaucetsUS]

Hi! Our Consumer Support team is here to help... please contact them here: bit.ly/3jznTLw or call them at: 1-800-PFAUCET (1-800-732-8238)

[@MStar10]

@@PfisterFaucetsUS ok but pls respond here for all viewers as well.

[@PfisterFaucetsUS]

The mounting nut in the installation video threads on one way in order to secure the base of the faucet to the sink. The mounting nut only threads in one way. Thanks!

[@five-eyes666]

I have the Pfister Parisa RT6-AMCC, our one is 12 years old and needs a new cartridge, does anyone know what type and where to purchase them in Canada? Or Pfister, where can we purchase a replace RT6-AMCC?

[@PfisterFaucetsUS]

Hi! The #RT6-AMCC roman tub faucet is discontinued, but cartridge #974-025 Is still available. Our Consumer Support Team is here to help with your parts... please contact them here: www.pfisterfaucets.com/parts-support/ask-a-question?sf265388776=1 or call them at: 1-800-PFAUCET (1-800-732-8238). Thanks - Pfister Social

[@bbikermama]

To overflow or not? What sinks are compatible?? Anyone?

[@CMichaels56]

DO NOT disconnect the waterline click connectors after you initially click them together. It destroys the washers and you’re left with a mess.

[@PfisterFaucetsUS]

Hi! Our Consumer Support Team is here to help if you need replacement parts... please get in touch with them here: www.pfisterfaucets.com/parts-support/ask-a-question?sf264584831=1 or call them at: 1-800-PFAUCET (1-800-732-8238). Thanks - Pfister Social

[@ImTooDC]

Thanks. I just installed my faucets.

[@PfisterFaucetsUS]

Awesome! Have a great day! Pfister Social

[@golf11underpar]

perfect, exactly what I needed, thank you!

[@PfisterFaucetsUS]

That's awesome! Thanks for your feedback, and have a great day! Pfister Social

[@golf11underpar]

@@PfisterFaucetsUS wow, you're welcome. BTW, I did buy a pfister brand faucet, the Penn. Thanks again!

[@anetagrazda4006]

I have a question, I instaled the faucet, water is running, however, there is no pressure, or a very week one. How can I fix that? I had a normal pressure before in the old faucet.

[@jagdeepbains2186]

You made it very simple. Thanks

[@PfisterFaucetsUS]

Thanks for the feedback! -- Pfister Social

[@Fatelvis2]

the plastic part of my deck plate comes thru the metal part but the part that comes thru is oval while the faucet bottom is round nor do I see a seal on the bottom of the plastic part any suggestions ?

[@PfisterFaucetsUS]

Hi! We want to help, but we need more information. Our Consumer Support Team is here to help with your questions and installation... please contact them here: bit.ly/3pOYoee or call them at: 1-800-PFAUCET (1-800-732-8238)

[@Fatelvis2]

@@PfisterFaucetsUS it wasnt the correct base exchanged it today thanks

[@PfisterFaucetsUS]

Hi, Thanks for the update, and we're glad to hear it's been resolved. Have a great day! --Pfister Social

[@discjunkiesDGT]

This was so helpful!! Thanks!!

[@PfisterFaucetsUS]

You're welcome. That's awesome news! Have a great day! -- Pfister Social

[@flores92manuel]

I recommend to still use plumbers pudding

[@musclepharm867]

el choya agreed! I followed the instructions and the son of a bitch still leaks! 👎

[@marwanmuna9042]

Agreed, same thing with me, I am going to place some plumber's putty as well anyways.

[@dionisguillermopadron9888]

musclepharm867 leaking problems solutions

[@dionisguillermopadron9888]

musclepharm867

[@travisduncan4572]

U guys have issues with drain leaking at sink bottom?

[@Ed-fj8wy]

Where can I purchase the adapter shown at 4:12 ?

[@elfuego5554]

Did you ever figure out where to get that adapter? I need two....

[@Itsangelica96]

mine didn't come with the adapter 😤

[@PfisterFaucetsUS]

Hi! Our Consumer Support team is here to help... please contact them here: bit.ly/3rZr1Wo or call them at: 1-800-PFAUCET (1-800-732-8238)

[@jodecilee591]

Thank you so much!!!!

[@PfisterFaucetsUS]

You're welcome! Thanks -- Pfister Social

[@ursala3000]

This is precisely what I was looking for! Thank you!

[@PfisterFaucetsUS]

Thanks for the feedback, have a great day! -- Pfister Social

[@edwardmainhart6108]

Bad video trying to put the horseshoe and long nut is a pain in the ass to install and good luck with a crescent wrench.

[@PfisterFaucetsUS]

Hi! Thank you for the feedback. If you need assistance from our team, they’re here to help... please get in touch with them here: www.pfisterfaucets.com/parts-support/ask-a-question?sf269210113=1 or call them at: 1-800-PFAUCET (1-800-732-8238). Thanks - Pfister Social

[@smitakolhe7434]

Great video. Wish I had seen this before I paid fortune to plumber.

[@PfisterFaucetsUS]

Hi! Glad to hear you liked the video. Hopefully, you’ll find it useful in the future! Have a great day. Pfister -- Social

[@jimflatley157]

AWS

[@karenk469]

Rather useless when the bottom part is screwed all the way to the bottom of my copper sink and doesn't even come close to tightening it up. Calling Pfister in the am.

[@PfisterFaucetsUS]

Happy to help! Our Consumer Support team can help you troubleshoot here: bit.ly/2YMfPzI or call us at: 1-800-PFAUCET (1-800-732-8238)

[@leecerveny9141]

Nothing to connect to a 1/2" supply line?!?!?!? Come on man!

[@PfisterFaucetsUS]

Hi! Most Pfister single-handle bath faucets include two inlet connectors to connect to the water supply. If you were missing parts, our Consumer Support Team is here to help... please get in touch with them here: www.pfisterfaucets.com/parts-support/ask-a-question?sf267271651=1 or call them at: 1-800-PFAUCET (1-800-732-8238). Thanks - Pfister Social

[@maurodivar8084]

WATCH OUT!! DOES NOT COME WITH A TOOL TO TIGHTEN THE LONG NUT UNDER THE SINK.

[@PfisterFaucetsUS]

Hi! The recommended tool to tighten the long bolt is an adjustable wrench. Thanks - Pfister Social

[@jaimedpcaus1]

So, in this case, no plumber's tape is used at all, on all the connections presented in this video, correct?

[@Meechl0uch]

My faucet is leaking from the threads of the drain pipe. Did I screw it on too tight?

[@PfisterFaucetsUS]

Hi, If the drain assembly is leaking, it may be best to have it replaced under warranty. One thing to look out for is that the Push and Seal drain is only compatible with sinks with overflow holes. If your sink bowl doesn’t have an overflow, this can be a factor. Our Consumer Support Team is here to help with the replacement drain assembly if needed... please get in touch with them here: www.pfisterfaucets.com/parts-support/ask-a-question?sf261326734=1 or call them at: 1-800-PFAUCET (1-800-732-8238). Thanks - Pfister Social

[@Meechl0uch]

@@PfisterFaucetsUS Thank you for the suc quick response.