Installing a SB Tactical 1913 pistol brace on a Keltec CP33

Items Shown in the Video:
Bushnell TRS25:
Rehv Arms Brace Adapter: www.rehvarms.c...
SB Tactical FS1913 Brace: bit.ly/2zoTSg2
Q Erector: bit.ly/3aBksPV
Support me by buying anything from Brownells, they support me so please support them. Click here: bit.ly/2Im76hO
Support the channel by buying something from PSA: bit.ly/2TQqche
Or lastly buy anything from Amazon, and I'll get a small percentage. : amzn.to/2XzEHII
Disclosure: Some of the links in this post are affiliate links and if you go through them to make a purchase I will earn a commission. You will not pay any more for going through my links. I link these companies and their products because of their quality and not because of the commission I receive from your purchases. The decision is yours, and whether or not you decide to buy something is completely up to you.

[@gruntspy44]

Omg this gun is movie worthy

[@ZackCarlson]

Yeah it’s pretty cool huh

[@treroney4720]

Zack Carlson - Writer does it Jam allot??

[@ZackCarlson]

I’ve only shot it four mags worth so far. Taking it out again today. First run of two mags with cci subs was great no issues. Second run of two mags with the soft lead Remington subs it hated. The mag had a tough time feeding them.

[@Wingnut353]

@@treroney4720 The mag has an integrated feed ramp... but the after market feed ramp for the PMR-30 should also fit this dunno if it would improve it at all. also it has an extremely strong ejector... so if you get ammo that is known to work it should be reliable.

[@Mycameron2323]

@@ZackCarlson black box Winchester runs perfect

[@DRAKE-ic1fd]

Oh man, i might have to get me one.

[@TMJ937]

Great vid! Have an erector .22 coming, and was really interested in this setup w/ the CP33. Any issues thus far with either the CP33 or the .22 erector?

[@shoppapa7238]

Okay sold

[@icervantesiii]

Space blaster..teeheehere. it is fun to shoot though.

[@stevekatz4372]

I sent for the Adapter and this Brace but had problems! The adapter fit OK but the brace would not FOLD, no matter how hard I tried, this brace would not fold at all! I sent it back and received a new Brace in about a week and I did get it to Fold but with much effort but then I could not get it to unfold but I did get it to unfold only once but could not get it to Fold once again, no matter how hard I tried, so I finally sent this one back and I received a refund! My experience was awful and I would Not recommend this to anyone, especially for $181.00!

[@bangsnap2651]

So awesome!!

[@ericbergfield6451]

What's your opinion on that silencer? Saw it while researching them, and thought it was a pretty unique design.

[@ZackCarlson]

It’s nice that it’s modular but aluminum so harder to clean. I prefer their el Camino for this reason

[@hiramabiff5557]

@@ZackCarlson You shouldn't have an issue cleaning with an ultrasonic, since you can take off each baffle and let it clean for about ten minutes in paint stripper and acetone mixed 50/50. Let it sit in there, remove, start scrubbing with a FIRM/HARD toothbrush. EVERYTHING will come right off after sitting in the ultrasonic.

[@hiramabiff5557]

if you cant get one online or prefer buying in person, go to a Jared jewelry store and they sell them for jewelry and are small however you can get away with buying the bigger version for about $40

[@channelcatchaser9426]

Sweet setup

[@ZackCarlson]

Thanks!

[@captainpegs0740]

How study is it with those tiny screws?

[@greenstreet5287]

It holds 33? Is it enlightened though?

[@Level_No_Curve]

33rd degree mason gun

[@greenstreet5287]

@@Level_No_Curve bingo xd

[@Level_No_Curve]

@@greenstreet5287 are u a mason

[@jamiedang3624]

Hello zack how do zero your red dot I have the same gun and red dot like your but can’t bring the dot lower as needed Appreciation if you can’t guide me through

[@prosjeffrey]

Where did you get the scope ?

[@OutlawAladdin]

Okay but what optic is that?

[@thescottishmexican]

I just bought a CP33. How do you like your red dot sight?

[@jessekrukowski7914]

Did the Q erector fit right on the end of the barrel?

[@brentacusmaximus6677]

200 for the brace/stock and 60 for the adapter lmao 🤣 no thanks I'll pass on the redicules RIPP OFF !

[@mjgII]

The gun itself is only 3-400$ though what the hell are you complaining about? Suppressible right out of the box,, lots of pica-tinny rail space, amazing design. Why don't you go spend north of 2k for an mp7?

[@crowsbridge]

Rehv arms sold out of adapters :(

[@ZackCarlson]

I think I'm going to try a Farrow Tech soon enough.

[@jonpace]

👍👍👍

[@darkskinamerican7826]

That weapon is not the same without the stock

[@ZackCarlson]

I know..... one reason I no longer have it.

[@MaximGhost]

I never understood why stormtroopers in Star Wars were always issued scoped E-11 space blasters without a brace or stock. If they learned how install one by watching this video, they wouldn't be missing all the time.

[@oknarphianexkraveduccial4325]

Why? It's a 22 ffs

[@Foxhound_J]

Mp7s aren't available to civilians yet

[@epiphanygunworks9893]

The CP33 was designed, and designated, as a competition pistol. The accuracy, out of the box, rivals a lot of already-custom rugers and brownings. Consider it a plastic Anschutz pistol. Besides the accuracy you also get a lot of functions you wouldnt normally get on a competition pistol and a whole world of aftermarket tinkerers. Anything can become possible and even keltec has stated that they focus only on the guns and not accessories so that they can inspire others to invent.

[@Thecommunistsarescum]

Nice setup 👍

[@ZackCarlson]

Thanks!