INSTALLING A WISE 2086 ON GAMMA X STRINGER

[@maheshswaminathan4240]

Please post a video after installing to demonstrate that we could preserve 360 rotations

[@richardsamarawickrama5528]

Hi, do you have a video where you do a sample string job? Just want to see what it looks like

[@onsightflash]

Great tutorial! Was wondering could you measure the height from the bottom of the bracket to the top of the Diablo? I want to see if this would fit on my machine base at the correct height if I used the same bracket as you did.

[@danmartinez7494]

Thank you Dave. The distance is 8.75 inches.

[@onsightflash]

@@danmartinez7494 thanks so much! That’s a perfect fit then for my machine base. Going to order a wise with bracket now!

[@alancmchan]

Thank you for the great video. Where did you buy the Wise adaptor plate from? Was it the 'gamma adaptor plate' or the 'drop weight adaptor plate'? Thank you. I have a similar Gamma dropweight machine. Thank you.

[@danmartinez7494]

It's the Drop Weight Adapter. Tennishead.com

[@alancmchan]

@@danmartinez7494 thank you for the prompt response Dan! And did you have any issues with the 360 degree rotation in the end?

[@jamesbenson4979]

I am having issue to string a tennis racket. The distance not long enough. Can you post a video please

[@danmartinez7494]

Hi James. I do not have this machine anymore. Can you email me pictures of how you have it mounted? I will try to help you. If it is only a couple of inches needed to clear the turntable, you may move the WISE 2086 to the second and third hole of the bracket so you will be using only 2 screws between the drop weight adapter and the WISE.. And Yes, 2 screws are enough to hold at max pull without breaking, we have tested it with a max of 150 Lbs. and it holds fine even with one screw. Email me at TennisHead.com

[@jamesbenson4979]

@@danmartinez7494 check your email please

[@jamesbenson4979]

I hook mine up but can’t turn 360 degree. Can you post yours

[@DB-CA]

Thanks

[@riyantobintang6768]

Tuku mesine ngono kuwi nang ndi

[@my240sx2]

Can you rotate the racket without hitting the Wise tension head? Can you post a video of your stringing? I should have never sold my X-2....

[@danmartinez7494]

It should spin in a similar way as the video posted by One of our great long time user, Paul Rider in this link. kzbin.info/www/bejne/hWeTgHtro5l4oMU&ab_channel=PaulRider

[@danmartinez7494]

No. You can't unless you raise the height of the turntable. You can also order a low profile adapter from Racquet Depot. I no longer have mine.

[@SkyreeXScalabar]

Will this fit on a Gamma Progression 200 machine?

[@danmartinez7494]

It should fit, however you may need to drill a hole or 2 on the table so it clears the rotating posts. or move the WISE 2086 to the next hole in the drop weight adapter, 2 holes would be enough to hold the WISE since rarely will be used to pull more than 75 lbs.

[@enviroconcern]

how on earth do you not show an example string job.....

[@danmartinez7494]

Sorry. Just not enough time, I will do one eventually.