Installing an NFamus Step notch on a 2007-18 Silverado lowered 12 inches in rear.

[@jeremydixon3395]

Digging the channel keep up the good work!! Miss my low rider trucking days!!

[@1Heavy_Sierra]

Clean welds bro, love this video very helpful 💯

[@federicohubertocruzdavila7869]

Traducir en español

[@patrickclemmons2697]

Garrett Jones is a good dude.

[@glenntumbleston8735]

Keep ‘em coming man!

[@DarthRaider]

Lowered 10 inches in the rear but the bed wasn't cut? How's that possible? I thought u needed a c notch to go 10 in the rear? I want to lower mine but want to avoid cutting the bed if I can

[@chivosproductions771]

Great work man also use a lot of nfamous products as well 🤙🏼

[@The_Nomad_Detailer]

Hey brotha, I just got a 2011 silverado, dropped 5/8, and I noticed the rear cross member is rubbing the driveshaft....not sure how long, but is there a way I can fix it without doing a 2-piece drive shaft? Im new to lowered trucks, so your help would be awesome! thanks.

[@lowerclassfab431]

@@The_Nomad_Detailer just cut the cross member

[@The_Nomad_Detailer]

@@lowerclassfab431 Really? thats ok to do? its not going to effect structure strength, or hauling stuff in my bed?

[@josuebravo9258]

Bad ass video brother

[@Corey_houston]

Can you weld in these notches with a 110 welder? I don’t have access to 220 outlet and curious if it’s worth practicing with a 110 for my own modifications

[@lowerclassfab431]

We have done it before…turn it up and burn it in

[@Corey_houston]

@@lowerclassfab431 thanks for the quick reply love watching your videos..keep em coming

[@lowerclassfab431]

Yessir thanks for checking us out

[@NaniDelValle]

Is notching the crossmember a must or can I just cut out a lil rectangle for my drive shaft?

[@NaniDelValle]

Like from top to bottom cut off not a little arch like most ppl do?

[@jasonkennedy3408]

Another great video brother I’d like to see how to move a battery to to the bed and wired in on a 88-98 c1500 or any truck close to same way of doing it and what if you lose the center for the back axle how do you recenter it agin or find center on a 88-98

[@lowerclassfab431]

I moved the battery under the bed on Nelson’s truck I’ll try to go over the wiring on a future video….to find center easiest way is to measure from brake backing plate to frame rail on each side and center accordingly

[@jasonkennedy3408]

Thank you sir

[@jasonkennedy3408]

@@lowerclassfab431 ok cool I didn’t know if the break plate was the same distance from frame on each side is why I was not sure thank you for your knowledge

[@jasonkennedy3408]

Yes I watched the 10 part videos of Nelson’s truck that was very in-depth im just having issues getting the wire attached to the starter

[@martinsoria6104]

How tall are those notches

[@dependorez3309]

i have a 2013 silverado crew cab CNG truck, currently sitting at a 2/6 i want to get a stepnotch but no shops are willing to work on my truck, any shops recommended?

[@lowerclassfab431]

Where are you located?

[@dependorez3309]

@@lowerclassfab431 fort worth TX

[@user-vk6pb6qz5q]

Will a crossmember notch on a 2015 Silverado single cab clear the bed?

[@user-vk6pb6qz5q]

A weld on one btw*

[@lowerclassfab431]

Yes they will clear….Trick’d Toys sells a driveshaft notch

[@59rider73]

ole boy used the china squinty safety glasses

[@Ppepochaz]

Love it, please do mine 🙏🏽

[@gabevancappellen6090]

What did you use to roll the fenders?

[@lowerclassfab431]

An aluminum baseball bat and a lot of patience😂

[@georgegarcia2585]

Send the link for 3 in block plzz

[@-plick-7388]

Do u need a 2 pc drive shaft if ur going this low?

[@lowerclassfab431]

Not on a regular cab but you need to notch tear gas tank x member

[@Rada_831]

How can I get one of those blocks?

[@lowerclassfab431]

Message Trick’d Toys Facebook page he will get you taken care of

[@Rada_831]

@@lowerclassfab431 ordered them today brother thank you !

[@ObsErnesto]

I think U left that u bolt on the frame 🧍🏻‍♂️😂

[@HOIKID]

Good eye 👁️

[@elitetruckingofficial]

Sheesh!!!!

[@cesarconh895]

Admire your work but I don't like the IQ45 flag in your garage. I understand where you live and how you grew up but I don't agree with MAGA.

[@lowerclassfab431]

That’s your opinion and you are entitled to it….I won’t get into politics on this channel but I will say my bank account liked when 45 was in office a lot more than this current dipshit

[@eljonnyvlogs2427]

Can u lowered mine lol

[@lowerclassfab431]

Yessir

[@eljonnyvlogs2427]

What’s your instagram I will dm u

[@lowerclassfab431]

@@eljonnyvlogs2427 text me 912-278-0636

[@texasmike7994]

Where are you located

[@lowerclassfab431]

Baxley Georgia