Installing Ebay Fog Lights! - 8th Gen Honda Accord Coupe

The installation of eBay parts is one of the hardest things known to man. In this video, I show how I nearly died trying to install these fog lights. Was it worth it? I guess. All the parts and tools in this video are not sponsored and everything was bought by me. *These lights only fit the 08-10 accord coupes.
Parts Used:
eBay Fog light kit - DNA 8th gen accord coupe fog light kit. ($40)
Soldering Gun-
The IQ of Albert Einstein-
Thanks for watching! Leave a Like and Subscribe It helps me out a ton!

[@xiBMXer22x]

Not on an 8th gen, but on an old BB6 of mine, I just bypassed the switch aspect completely, and piggybacked on to my DRLs. Which you could do here as well, so basically any time the car would be on, the fogs would be on. Just kind of an easier approach than putting in the switch if you don’t feel like splicing everything. Love the vid though.

[@jackbranson2602]

I was hoping this would be a plug and play assembly oh lord

[@ryanlusinger259]

It is the car comes with wires for the fog lights on every model he jus didn't see them they also have brown connectors attached to them jus look down in the area of the fog lights with a light and you will see them

[@jackbranson2602]

@@ryanlusinger259 yeah this guy was doing things the long way too bad the parts are discontinued or else id start this project right way

[@accordingtodave8554]

@@ryanlusinger259 yes there is wiring there but there isn't a switch in the car for the fog lights, you must buy an expensive stock with the fog light switch. This way was way way cheaper, and it's not hard at all.

[@accordingtodave8554]

@@jackbranson2602 yeah exactly what you said they are discontinued so this is the only way now. Thanks

[@samlung2724]

The stock is like $40 on eBay

[@gosborne3248]

Great vid my friend Keep up cool vids look good

[@accordingtodave8554]

👍

[@bigboymunch3691]

keep posting man.im a huge fan

[@accordingtodave8554]

Thanks dude!

[@kyleraiff8637]

This is clean, but thank god mine came stock lol

[@accordingtodave8554]

Lucky you lol

[@automattic4202]

Do yours fit flush with the actual hole? Or is there a gap around the lenses? All my screws went in fine everything lines up just wonder if I should tweak them to be flush or if this is the way there supposed to be…I don’t really mind bc my filters behind the one so the gap kinda works just wanted to know these are correct 🤷🏻‍♂️😂

[@justinthegamer2559]

I have the sedan and it came from the factory with that gap

[@xChiNo617]

Can you post the instruction diagram, mine did not come with instructions for install.

[@brayanmosqueda8356]

Hey what dude did u connect the white wire to

[@accordingtodave8554]

The white wire got extended to go from the engine bay into the car and then connected to a fuse under the driver's side dash.. the fuse should be a 12 volt, accessory fuse which only turns on when the key is on..that way it can't stay on and drain your battery.

[@garypawlowski6482]

Where does the white wire go u said to the fuse box but where lol

[@yUNGFRo23]

Tips for getting wires thru the firewall ? Did you have to cut ? Or keep poking at it ?

[@accordingtodave8554]

Keep poking and use soapy water as a lubricant:)

[@ranjidsoundararajah6399]

Hey man can you send the link for the fog light

[@accordingtodave8554]

ebay! The brand is DNA

[@eemeryx3]

hey ! AT 11:49 your front driver side fog light is sitting on top of what part? I've been looking for this part name for the last 2hr as I hit a curb and now that box looking part is loose. Thanks would appreciate it !

[@smokedoutj2894]

What type of coilover do you have and where did you get them at ?

[@accordingtodave8554]

I have truhart coilovers and I actually got them second hand from offer up. But you can buy them new for around $600 off their website or any big car website tbh.

[@ChitoRedskins92]

@@accordingtodave8554 how much did you drop it ? And can you go lower in the front ? Thanks for the video

[@accordingtodave8554]

@@ChitoRedskins92 dropped about 3 inches and yes it could go much lower

[@goodjob2190]

U need some 25mm spacers

[@fallenangel1924]

Where did you get the wire holding stand you used when you soldered the wires

[@accordingtodave8554]

Harbor freight

[@mytwohunnies]

Hey wanna sell the other fog lights? That’s the fogs for the ‘11/‘12 coupe

[@kodyklink1312]

What wheels are those? I like the white on white.

[@accordingtodave8554]

They are 10th gen accord sport wheels painted white

[@jamaristorres8974]

Hey we’re you connect the black cable ?

[@michaelbridges1634]

did the foglight switch housing come with your kit?

[@accordingtodave8554]

No I had custom made that switch housing.

[@michaelbridges1634]

@@accordingtodave8554 could you refer me to where you got the housing

[@accordingtodave8554]

@@michaelbridges1634 08V31-SMA-0M035 I believe this is the part number. It's called 3 switch bezel, please do some research as I could have got the wrong part number.

[@levialby3920]

Can you post a link for these that you use

[@accordingtodave8554]

I don't have a link anymore sorry.

[@user-bs8rk9zb7u]

Is good

[@sergioramirez1693]

Can you install this same full face bumper on a accord sedan same 8th gen one.

[@accordingtodave8554]

What do you mean?