Installing Electrolux (Luxcare) Front Load Washer and Dryer Set with a Stacking Kit

[@timothypace9374]

This worked perfectly. I miss being an electrolux service tech. Wish I could come back.

[@AnonymousWonder]

Thank you for posting this. I had my suspicions, but now I know the guys who delivered and installed mine did it wrong...

[@steffnic13]

You and likely many others of us here right now. 😩🙄😭

[@lordzson2700]

Very nice thank you, I like his face at 5:06 when he accidentally ruined the clear tape and got it stick together lol

[@Kaltinril]

I'll be watching the installers when they come to see if they do those side and back sticky parts.

[@AsTheWheelsTurn]

oh I bet you are a real dream customer to deal with lol If a customer wants to stand and watch me work I just stop working and stare at them like the jackass that they are until they leave or I walk away and do not do the work. show some respect, you have no business watching anyone work. when the job is done if it is incorrect you say something, otherwise stay out of the way.

[@Kaltinril]

@@AsTheWheelsTurn ah, the trust but verify, that's also good. Luckily I did come watch them, they had never installed one before and were lost. I linked them this video and it helped them install it.

[@jiggyplum7851]

An aerial shot of the position of those stickers would have been more helpful. How close to each other do they go? Do they touch?

[@ianmackay2758]

Yes. Especially since the instructions that came with it could be more clear too.

[@AsTheWheelsTurn]

you are way over thinking that man.he explained it perfectly fine they go side by side. they can touch or have a little space, I know you r comment is 10 months old so not relevant to you anymore but I am just blown away by the absolutely idiotic things people are asking.how do you guys have so little common sense?

[@jiggyplum7851]

“they can touch or have a little space” thanks for that information - you just provided more info in your comment than the video itself. Also, way to call people idiots that don’t understand as well as you. Nice job

[@ianmackay2758]

@@AsTheWheelsTurn once i installed it and stacked the dryer on top, it was obvious that its pretty simple. But if you never did it before (ill probably have done this only once in my life hopefully) its not obvious at all where the tape should go. People might want to resell the washer and not want scratches from the dryer so the tape placement is important. In my case this was in a really difficult small room and further complicated by a washer pan going under the washer. and once the dryer is on, it is stuck there from the tape at front. Everyone has their own experiences and concerns.

[@AsTheWheelsTurn]

awesome ! great instruction I was able to do this very easily.

[@mohamedidhmed2549]

what about ventillation exhaust how we connect it if it is necssary inside bathroom

[@AsTheWheelsTurn]

you should have flexible round venting and it attaches with something like a hose clamp. I would suggest asking someone at Lowes or Home Depot and they can tell you what you need..

[@mizz_birdie5026]

I can't get my screws all the way down. 2:58

[@AsTheWheelsTurn]

you are probably using the wrong tip. I dont know why appliance manufacturers do this but they use screws that LOOK like a regular Phillips but if you look close they are not, they require a square drive or combo drive tip. you can still do it with a Phillips but you have to be careful to not strip them and it requires a lot of pressure, like push really hard and go slow.

[@mattwoody1089]

He seems smart???????????????

[@nicolatino50000]

How the hell am i supposed to fit the bracket in the back and then bring in my stackable set into my closet style laundry. The whole point of stackable is to save space

[@mikespindor]

It's extremely difficult. Just did an install today and we had to stack it outside the closet style location that had minimal room to maneuver on the sides. And then use a dolley from the front to move it backward towards it's final resting location. Which also had a 2 inch platform we had to get the washer/dryer onto. Was a tough install, all while making sure the dryer stayed secure to the top. Not fun.

[@AsTheWheelsTurn]

you need to use your brain and not be an idiot. assemble it outside of the space, attach all the water lines electrical ect out of the space...which means you might need longer hoses ect. then you push it into the space.its not that hard...

[@vadha1]

looks like a nightmare to service when stacked. Ive had technicians over three times already to repair my electrolux washer and dryer

[@AsTheWheelsTurn]

dang that is not sounding good! what issues did you have with yours?

[@youmeetatamia787]

HOW DO I CONNECT WATER PIPE WITH WASHER?

[@AsTheWheelsTurn]

you twist it on using your hand the same as if you were attaching a garden hose, then use some wide pliers to snug it up just about 1/4 turn. I know this is an old comment, I am only replying in case someone else has the same question.

[@DinoQiu14]

2:30 (STACKIT7X) and 9:14 don't even match.

[@Kaltinril]

Yeah I think they have the STACKIT7XL shown actually. For some reason lots of websites show these model numbers as the same.

[@MsThinkB4Udo]

I can't even move my washer, lol

[@txgreasemonkey]

It’s nice having to use my imagination to guess exactly where you are placing the adhesive strips. It wouldn’t have been that hard to show a view of the top of the washer for even two seconds. Lame.

[@jimo1759]

Why have you all stolen most of your Electrolux videos from Electrolux’s portal? That is so unethical.

[@AsTheWheelsTurn]

how so? Electrolux allows free use of their instructional videos.... quit trying to find a problem where there is not one.