Installing Fishman Matrix Infinity pickups on Martin M 36

[@jasondesoto6666]

Awesome job! Beautiful guitar btw...very nice skills!! :)

[@TheSingingDoctor325]

Sounds great. I love the M36 model.

[@Kwaician]

How big of a bit did you use to drill into the bridge plate for the piezo cable? Thanks, sounds great

[@HoboCivic]

Thank you, I used a 3/32 bit :)

[@abaniko9]

Thanks for the video. Have you done a few installs? I have a question if you will. Are the holes at the end of the guitar where the jack is installed basically the same size? I Just bought a Martin D35 that has one of these installed but am having it switched out for an Fishman Aura Ellipse, So I wan't to put the pick up you just demoed in my 12 string that already has a passive pick up but am hoping for an easy switch out for a standard sized hole. Thanks again

[@HoboCivic]

This was my first time doing a pickup instaltion :). But for the hole size It should be the same size as long as its installed the same way as mine. Basically yours has to be a strap pin input jack like mine. Just make sure your guitar is not one of the PU systems that have a battery hatch intagraded with the input jack at the bottom cuz that would make things a little more complicated . Hopefully this helps :)

[@BFClayto]

What strings and gauge are you using? And is that a med. gauge pick? Sounds good. I have a Martin SWDGT that I want to put a p/u in. Thanks for the video.

[@HoboCivic]

Elixers phosphor bronze light gauge. pick is a jazz III I had laying around.

[@michaellitton4380]

How large is the back hole for the jack ?

[@HoboCivic]

Its 15/32 i used a StewMac endpin jack reamer :)

[@TeeJayDeluxe]

Awesome job. Wish you could come round and fit my classical. I don't have all the tools.

[@elishpeter]

Brother does it hum during live gigs in loud volume???

[@HoboCivic]

sometimes it gets feed back but you can just get a sound hole cover to avoid that.

[@CRQF]

Too bad you don’t use vocal instructions and you skip too many steps. Don’t explain size of anything. What size is the tapered reamer, how far do you insert it, what size is the drill for the bridge?

[@HoboCivic]

This was more of a entertainment video not so much of a how to vidoe or else I would have givien all that information. But I will gladly answer any questions you have :)

[@CRQF]

I make my comment because I have installed many of these different pickups, but I assumed it was for a person who needed to know exactly how to install this.